.github/CODE_OF_CONDUCT.md

@@ -1,128 +0,0 @@
-# Contributor Covenant Code of Conduct
-
-## Our Pledge
-
-We as members, contributors, and leaders pledge to make participation in our
-community a harassment-free experience for everyone, regardless of age, body
-size, visible or invisible disability, ethnicity, sex characteristics, gender
-identity and expression, level of experience, education, socio-economic status,
-nationality, personal appearance, race, religion, or sexual identity
-and orientation.
-
-We pledge to act and interact in ways that contribute to an open, welcoming,
-diverse, inclusive, and healthy community.
-
-## Our Standards
-
-Examples of behavior that contributes to a positive environment for our
-community include:
-
-* Demonstrating empathy and kindness toward other people
-* Being respectful of differing opinions, viewpoints, and experiences
-* Giving and gracefully accepting constructive feedback
-* Accepting responsibility and apologizing to those affected by our mistakes,
-  and learning from the experience
-* Focusing on what is best not just for us as individuals, but for the
-  overall community
-
-Examples of unacceptable behavior include:
-
-* The use of sexualized language or imagery, and sexual attention or
-  advances of any kind
-* Trolling, insulting or derogatory comments, and personal or political attacks
-* Public or private harassment
-* Publishing others' private information, such as a physical or email
-  address, without their explicit permission
-* Other conduct which could reasonably be considered inappropriate in a
-  professional setting
-
-## Enforcement Responsibilities
-
-Community leaders are responsible for clarifying and enforcing our standards of
-acceptable behavior and will take appropriate and fair corrective action in
-response to any behavior that they deem inappropriate, threatening, offensive,
-or harmful.
-
-Community leaders have the right and responsibility to remove, edit, or reject
-comments, commits, code, wiki edits, issues, and other contributions that are
-not aligned to this Code of Conduct, and will communicate reasons for moderation
-decisions when appropriate.
-
-## Scope
-
-This Code of Conduct applies within all community spaces, and also applies when
-an individual is officially representing the community in public spaces.
-Examples of representing our community include using an official e-mail address,
-posting via an official social media account, or acting as an appointed
-representative at an online or offline event.
-
-## Enforcement
-
-Instances of abusive, harassing, or otherwise unacceptable behavior may be
-reported to the community leaders responsible for enforcement at
-contact@christitus.com.
-All complaints will be reviewed and investigated promptly and fairly.
-
-All community leaders are obligated to respect the privacy and security of the
-reporter of any incident.
-
-## Enforcement Guidelines
-
-Community leaders will follow these Community Impact Guidelines in determining
-the consequences for any action they deem in violation of this Code of Conduct:
-
-### 1. Correction
-
-**Community Impact**: Use of inappropriate language or other behavior deemed
-unprofessional or unwelcome in the community.
-
-**Consequence**: A private, written warning from community leaders, providing
-clarity around the nature of the violation and an explanation of why the
-behavior was inappropriate. A public apology may be requested.
-
-### 2. Warning
-
-**Community Impact**: A violation through a single incident or series
-of actions.
-
-**Consequence**: A warning with consequences for continued behavior. No
-interaction with the people involved, including unsolicited interaction with
-those enforcing the Code of Conduct, for a specified period of time. This
-includes avoiding interactions in community spaces as well as external channels
-like social media. Violating these terms may lead to a temporary or
-permanent ban.
-
-### 3. Temporary Ban
-
-**Community Impact**: A serious violation of community standards, including
-sustained inappropriate behavior.
-
-**Consequence**: A temporary ban from any sort of interaction or public
-communication with the community for a specified period of time. No public or
-private interaction with the people involved, including unsolicited interaction
-with those enforcing the Code of Conduct, is allowed during this period.
-Violating these terms may lead to a permanent ban.
-
-### 4. Permanent Ban
-
-**Community Impact**: Demonstrating a pattern of violation of community
-standards, including sustained inappropriate behavior,  harassment of an
-individual, or aggression toward or disparagement of classes of individuals.
-
-**Consequence**: A permanent ban from any sort of public interaction within
-the community.
-
-## Attribution
-
-This Code of Conduct is adapted from the [Contributor Covenant][homepage],
-version 2.0, available at
-https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
-
-Community Impact Guidelines were inspired by [Mozilla's code of conduct
-enforcement ladder](https://github.com/mozilla/diversity).
-
-[homepage]: https://www.contributor-covenant.org
-
-For answers to common questions about this code of conduct, see the FAQ at
-https://www.contributor-covenant.org/faq. Translations are available at
-https://www.contributor-covenant.org/translations.

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,26 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+---
+
+## Describe the bug
+A clear and concise description of what the bug is.
+
+## To Reproduce
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+## Expected behavior
+A clear and concise description of what you expected to happen.
+
+## Screenshots
+If applicable, add screenshots to help explain your problem.
+
+## Additional context
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/bug_report.yaml

@@ -1,62 +0,0 @@
-name: "Bug report"
-description: "Report a bug to help us identify and fix issues in the project."
-labels: ["bug"]
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        # 🐞 **Issue Report**
-        Thank you for taking the time to report an issue! Please provide as much detail as possible to help us address the problem efficiently.
-
-        ## ⚠️ **IMPORTANT**
-        - 🛠️ **Supported environments only:** We only support Windows 11. Custom ISOs that are not made using Microwin are not supported.
-        - 💡 For general questions, use the [Discussions section](https://github.com/Christitustech/winutil/discussions) or join our Community-driven [Discord Server](https://discord.gg/RUbZUZyByQ).
-
-  - type: checkboxes
-    attributes:
-      label: ⚙️ Issue Checklist
-      options:
-        - label: I have read the guidelines.
-        - label: I checked for duplicate issues.
-        - label: I searched for existing discussions.
-        - label: I checked for an existing pull request that addresses this issue.
-    validations:
-      required: true
-
-  - type: input
-    id: affected_part
-    attributes:
-      label: 📜 What part of Winutil are you having issues with?
-      placeholder: "e.g., Microwin, Tweaks, etc."
-    validations:
-      required: true
-
-  - type: textarea
-    id: issue_description
-    attributes:
-      label: 📝 Provide a clear and concise description of the issue.
-    validations:
-      required: true
-
-  - type: textarea
-    id: steps_to_reproduce
-    attributes:
-      label: 🔄 Steps to reproduce the issue.
-      placeholder: "e.g., Step 1: ..., Step 2: ..."
-    validations:
-      required: true
-
-  - type: textarea
-    id: error_output
-    attributes:
-      label: ❌ Paste the full error output (if available).
-      placeholder: "Include any relevant logs or error messages."
-
-  - type: textarea
-    id: additional_context
-    attributes:
-      label: 🖼️ Additional context.
-      placeholder: "Include screenshots, code blocks (use triple backticks ```), or any other relevant information."
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -1,5 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-    - name: 💻 Community Discord
-      url: https://discord.gg/RUbZUZyByQ
-      about: Join our Community Discord server to chat with other users in the Winutil community.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/ISSUE_TEMPLATE/feature_request.yaml

@@ -1,57 +0,0 @@
-name: "Feature request"
-description: "Suggest a new feature or improvement for the project."
-labels: ["enhancement"]
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        # ✨ **Feature request**
-        Thank you for taking the time to suggest a feature! Please provide as much detail as possible to help us understand and evaluate your request.
-
-        ## ⚠️ **IMPORTANT**
-        - 🛠️ **Supported environments only:** We only support Windows 11.
-        - 💡 For general questions, use the [Discussions section](https://github.com/Christitustech/winutil/discussions) or join our Community-driven [Discord Server](https://discord.gg/RUbZUZyByQ).
-
-  - type: checkboxes
-    attributes:
-      label: ⚙️ Issue Checklist
-      options:
-        - label: I have read the guidelines.
-        - label: I checked for duplicate issues.
-        - label: I searched for existing discussions.
-        - label: I checked for an existing pull request that addresses this request.
-    validations:
-      required: true
-
-  - type: textarea
-    id: problem_statement
-    attributes:
-      label: ❓ Is your feature request related to a problem?
-      placeholder: "Provide a clear and concise description of the issue you're facing. Example: 'I'm always frustrated when [...]'"
-    validations:
-      required: false
-
-  - type: textarea
-    id: proposed_solution
-    attributes:
-      label: 💡 Describe the solution you'd like
-      placeholder: "Provide a clear and concise description of what you want to happen."
-    validations:
-      required: true
-
-  - type: textarea
-    id: alternatives
-    attributes:
-      label: 🔄 Describe alternatives you've considered
-      placeholder: "Provide details on any alternative solutions or features you've thought about."
-    validations:
-      required: false
-
-  - type: textarea
-    id: additional_context
-    attributes:
-      label: 🖼️ Additional context
-      placeholder: "Include screenshots, code blocks (use triple backticks ```), or any other relevant information."
-    validations:
-      required: false

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,4 +1,7 @@
-<!--Before you make this PR have you followed the docs here? - https://christitustech.github.io/winutil/contribute/ -->
+# Pull Request
+
+## Title
+[Provide a succinct and descriptive title for the pull request.]
 
 ## Type of Change
 - [ ] New feature
@@ -10,20 +13,20 @@
 - [ ] UI/UX improvement
 
 ## Description
-<!--[Provide a detailed explanation of the changes you have made. Include the reasons behind these changes and any relevant context. Link any related issues.]-->
+[Provide a detailed explanation of the changes you have made. Include the reasons behind these changes and any relevant context. Link any related issues.]
 
 ## Testing
-<!--[Detail the testing you have performed to ensure that these changes function as intended. Include information about any added tests.]-->
+[Detail the testing you have performed to ensure that these changes function as intended. Include information about any added tests.]
 
 ## Impact
-<!--[Discuss the impact of your changes on the project. This might include effects on performance, new dependencies, or changes in behaviour.]-->
+[Discuss the impact of your changes on the project. This might include effects on performance, new dependencies, or changes in behaviour.]
 
 ## Issue related to PR
-<!--[What issue/discussion is related to this PR (if any)]-->
+[What issue/discussion is related to this PR (if any)]
 - Resolves #
 
 ## Additional Information
-<!--[Any additional information that reviewers should be aware of.]-->
+[Any additional information that reviewers should be aware of.]
 
 ## Checklist
 - [ ] My code adheres to the coding and style guidelines of the project.

.github/SECURITY.md

@@ -1,5 +0,0 @@
-# Security Policy
-
-If you find a security issue please make post it in the issues tab. If you think it should be private you can email me at contact@christitus.com.
-
-For immediate response check out our discord server @ [![](https://dcbadge.limes.pink/api/server/https://discord.gg/RUbZUZyByQ?theme=default-inverted&style=for-the-badge)](https://discord.gg/RUbZUZyByQ)

.github/dependabot.yml

@@ -6,4 +6,4 @@ updates:
       interval: "weekly"
     ignore:
       - dependency-name: "actions/stale"
-        versions: '>= 9'
+        versions: '>= 9'

.github/mkdocs.yml

@@ -1,91 +0,0 @@
-site_name: WinUtil Documentation
-docs_dir: '../docs'
-repo_url: https://github.com/ChrisTitusTech/winutil
-
-nav:
-  - Introduction: 'index.md'
-  - User Guide: 'userguide.md'
-  - Contributing Guide: 'CONTRIBUTING.md'
-  - Documentation:
-      - Dev Docs: 'devdocs.md'
-      - Known Issues: 'KnownIssues.md'
-  - FAQ: 'faq.md'
-
-not_in_nav: |
-  dev/
-
-theme:
-  name: material
-  custom_dir: '../overrides'
-  features:
-    - navigation.tabs
-    - navigation.sections
-    - toc.integrate
-    - navigation.top
-    - search.suggest
-    - search.highlight
-    - content.tabs.link
-    - content.code.annotation
-    - content.code.copy
-  language: en
-  logo: assets/favicon.png
-  favicon: assets/favicon.png
-  palette:
-    # Palette toggle for automatic mode
-    - media: "(prefers-color-scheme)"
-      toggle:
-        icon: material/brightness-auto
-        name: Switch to light mode
-
-    # Palette toggle for light mode
-    - media: "(prefers-color-scheme: light)"
-      scheme: default
-      accent: blue
-      toggle:
-        icon: material/brightness-7
-        name: Switch to dark mode
-
-    # Palette toggle for dark mode
-    - media: "(prefers-color-scheme: dark)"
-      scheme: slate
-      primary: black
-      accent: blue
-      toggle:
-        icon: material/weather-night
-        name: Switch to light mode
-markdown_extensions:
-  - admonition
-  - pymdownx.details
-  - pymdownx.superfences
-  - pymdownx.superfences:
-      custom_fences:
-        - name: mermaid
-          class: mermaid
-          format: !!python/name:pymdownx.superfences.fence_code_format
-  - abbr
-  - attr_list
-  - pymdownx.snippets
-  - md_in_html
-  - pymdownx.superfences
-  - pymdownx.tabbed:
-      alternate_style: true
-  - pymdownx.highlight:
-      anchor_linenums: true
-      line_spans: __span
-      pygments_lang_class: true
-  - pymdownx.inlinehilite
-  - def_list
-  - pymdownx.tasklist:
-      custom_checkbox: true
-  - toc:
-      permalink: true
-
-plugins:
-  - search
-  - awesome-pages
-  - git-revision-date-localized
-  - minify:
-      minify_html: true
-      htmlmin_opts:
-          remove_comments: true
-      cache_safe: true

.github/release-drafter.yml

@@ -1,54 +0,0 @@
-tag-prefix: ''
-categories:
-  - title: '🚀 Features'
-    labels:
-      - 'feature'
-      - 'enhancement'
-  - title: '🐛 Bug Fixes'
-    labels:
-      - 'fix'
-      - 'bugfix'
-      - 'bug'
-  - title: '📚 Documentation'
-    label: 'documentation'
-  - title: '🔒 Security'
-    label: 'security'
-change-template: '- $TITLE @$AUTHOR (#$NUMBER)'
-template: |
-  ## Changes
-
-  $CHANGES
-
-change-title-escapes: '\<*_&"'''
-autolabeler:
-  - label: 'documentation'
-    files:
-      - '*.md'
-    branch:
-      - '/docs{0,1}\/.+/'
-  - label: 'bug'
-    branch:
-      - '/fix\/.+/'
-    title:
-      - '/fix/i'
-  - label: 'enhancement'
-    branch:
-      - '/feature\/.+/'
-    body:
-      - '/[A-Z]+-[0-9]+/'
-  - label: 'documentation'
-    files:
-      - '**/*.md'
-      - 'docs/**/*'
-  - label: 'security'
-    branch:
-      - '/security\/.+/'
-replacers:
-  - search: /"/g
-    replace: ''
-  - search: /'/g
-    replace: ''
-exclude-labels:
-  - 'skip-changelog'
-
-filter-by-commitish: true

.github/requirements.txt

@@ -1,51 +0,0 @@
-Babel==2.15.0
-bracex==2.5
-cairocffi==1.7.1
-CairoSVG==2.7.1
-certifi==2024.7.4
-cffi==1.17.0
-charset-normalizer==3.3.2
-click==8.1.7
-colorama==0.4.6
-csscompressor==0.9.5
-cssselect2==0.7.0
-defusedxml==0.7.1
-ghp-import==2.1.0
-gitdb==4.0.11
-GitPython==3.1.43
-htmlmin2==0.1.13
-idna==3.7
-Jinja2==3.1.5
-jsmin==3.0.1
-Markdown==3.6
-MarkupSafe==2.1.5
-mergedeep==1.3.4
-mkdocs==1.6.0
-mkdocs-awesome-pages-plugin==2.9.3
-mkdocs-get-deps==0.2.0
-mkdocs-git-revision-date-localized-plugin==1.2.6
-mkdocs-material==9.5.31
-mkdocs-material-extensions==1.3.1
-mkdocs-minify-plugin==0.8.0
-natsort==8.4.0
-packaging==24.1
-paginate==0.5.6
-pathspec==0.12.1
-pillow==10.4.0
-platformdirs==4.2.2
-pycparser==2.22
-Pygments==2.18.0
-pymdown-extensions==10.9
-python-dateutil==2.9.0.post0
-pytz==2024.1
-PyYAML==6.0.2
-pyyaml_env_tag==0.1
-regex==2024.7.24
-requests==2.32.3
-six==1.16.0
-smmap==5.0.1
-tinycss2==1.3.0
-urllib3==2.2.2
-watchdog==4.0.1
-wcmatch==9.0
-webencodings==0.5.1

.github/workflows/close-discussion-on-pr.yaml

@@ -1,48 +0,0 @@
-name: Close Discussion on PR Merge
-
-on:
-  pull_request:
-    types: [closed]
-
-jobs:
-  closeDiscussion:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Check if PR was merged
-        if: github.event.pull_request.merged == true
-        run: echo "PR was merged"
-
-      - name: Extract Discussion Number & Close If any Were Found
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        if: github.event.pull_request.merged == true
-        id: extract-discussion
-        run: |
-          pr_body="${{ github.event.pull_request.body }}"
-          discussion_ids=$(echo "$pr_body" | grep -oP '(?i)(resolve|fix|close)[s|d]? #\K[0-9]+')
-
-          if [ -z "$discussion_ids" ]; then
-            echo "No discussion IDs found."
-            exit 0
-          fi
-
-          for discussion_id in $discussion_ids; do
-            echo "Attempting to close discussion #$discussion_id"
-            response=$(curl -s -X PATCH -H "Authorization: token $GITHUB_TOKEN" \
-                 -H "Accept: application/vnd.github.v3+json" \
-                 -d '{"state": "closed"}' \
-                 "https://api.github.com/repos/${{ github.repository }}/discussions/$discussion_id")
-
-            if echo "$response" | jq -e '.id' > /dev/null; then
-              echo "Successfully closed discussion #$discussion_id"
-            else
-              error_message=$(echo "$response" | jq -r '.message // "Unknown error"')
-              echo "Warning: Failed to close discussion #$discussion_id. Error: $error_message"
-              echo "Full response: $response"
-            fi
-          done
-        shell: bash
-        continue-on-error: true

.github/workflows/close-discussion.yml

@@ -0,0 +1,30 @@
+name: Close Discussion on PR Merge
+
+on:
+  pull_request:
+    types: [closed]
+
+jobs:
+  closeDiscussion:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check if PR was merged
+        if: github.event.pull_request.merged == true
+        run: echo "PR was merged"
+
+      - name: Extract Discussion Number
+        if: github.event.pull_request.merged == true
+        id: extract-discussion
+        run: |
+          echo "discussion=$(echo '${{ github.event.pull_request.body }}' | grep -oP '(?<=Resolves #)\d+')" >> $GITHUB_OUTPUT
+        shell: bash
+
+      - name: Close the discussion
+        if: github.event.pull_request.merged == true && steps.extract-discussion.outputs.discussion
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          DISCUSSION_ID: ${{ steps.extract-discussion.outputs.discussion }}
+        run: |
+          curl -X PATCH -H "Authorization: token $GITHUB_TOKEN" \
+               -d '{"state": "closed"}' \
+               "https://api.github.com/repos/${{ github.repository }}/discussions/${DISCUSSION_ID}"

.github/workflows/close-old-issues.yaml

@@ -22,14 +22,14 @@ jobs:
         exempt-issue-labels: "Keep Issue Open"
         # Split it into two weeks, after one week the issue will be marked as stale,
         # after another week have pasted without any update.. the issue will then be closed.
-        days-before-issue-stale: 90
+        days-before-issue-stale: 7
-        days-before-issue-close: 365
+        days-before-issue-close: 7
         # NEVER mark PRs as Stale or Close + this workflow should never have write permissions on PRs, EVER!
         days-before-pr-stale: -1
         days-before-pr-close: -1
         # Sends a message for both the Stale and Close events of an issue.
-        stale-issue-message: "This issue was marked as stale due to inactivity."
+        stale-issue-message: "This issue was marked as stale because it has been inactive for 7 days"
-        close-issue-message: "This issue was closed after remaining stale without updates."
+        close-issue-message: "This issue was closed because it has been inactive for 7 days since it was marked as stale"
         # Increase this value if the project receives a lot of
         # PRs (yes.. apparently they're processed no matter what) & Issues.
         # Default value for it (according to the docs) is 30

.github/workflows/compile.yaml

@@ -1,22 +1,25 @@
-name: Compile & Check
+name: Compile
 
 on:
   push:
-    branches: ["main"]
+    branches:
-  pull_request:
+      - main
-    branches: ["main"]
+      - test*
   workflow_dispatch: # Manual trigger added
-  workflow_call: # Allow other Actions to call this workflow
 
 jobs:
-  Compile-and-Check:
+  build-runspace:
     runs-on: windows-latest
     steps:
-    - name: Checkout Sources
+    - uses: actions/checkout@v4
-      uses: actions/checkout@v4
+      with:
-
+        ref: ${{ github.head_ref }}
-    - name: Compile and Syntaxcheck winutil.ps1
+    - name: Compile project
       shell: pwsh
       run: |
         Set-ExecutionPolicy Bypass -Scope Process -Force; ./Compile.ps1
       continue-on-error: false # Directly fail the job on error, removing the need for a separate check
+    - uses: stefanzweifel/git-auto-commit-action@v5
+      with:
+        commit_message: Compile Winutil
+      if: success()

.github/workflows/createchangelog.yml

@@ -0,0 +1,42 @@
+name: Update update.mb on Release
+
+on:
+  release:
+    types: [published, prereleased]
+  workflow_dispatch:  # Add this line to enable manual triggering
+
+jobs:
+  update-file:
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Checkout Repository
+      uses: actions/checkout@v4
+
+    - name: Get all releases and update update.mb file
+      run: |
+        # Fetch all releases including pre-releases using GitHub CLI
+        gh release list --limit 5 > releases.txt
+        
+        # Extract numeric versions and create update.mb content
+        echo "" > docs/update.mb
+        while read -r line; do
+          tag=$(echo "$line" | awk '{print $1}')
+          name=$(echo "$line" | awk -F'\t' '{print $2}')
+          version_numeric=$(echo "$tag" | grep -o -E '[0-9.]+')
+          body=$(gh release view "$tag" --json body --jq .body)
+          echo "## $version_numeric" >> docs/update.mb
+          echo "Release name: $name" >> docs/update.mb
+          echo "Release body: $body" >> docs/update.mb
+          echo "" >> docs/update.mb
+        done < releases.txt
+
+    - name: Commit and Push Changes
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      run: |
+        git config --global user.name 'github-actions[bot]'
+        git config --global user.email 'github-actions[bot]@users.noreply.github.com'
+        git add docs/update.mb
+        git commit -m "Update update.mb with all releases"
+        git push

.github/workflows/github-pages.yaml

@@ -1,33 +0,0 @@
-name: GitHub Pages Deploy
-
-on:
-  push:
-    paths:
-      - '.github/mkdocs.yml'
-      - '.github/requirements.txt'
-      - 'docs/**'
-      - 'overrides/**'
-      - '.github/CONTRIBUTING.md'
-  workflow_dispatch:
-
-jobs:
-  build-and-deploy:
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: '0'  # Fetch all commit history for all branches as well as tags.
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x  # Install latest Stable release of Python 3
-          cache: 'pip'  # Caching pip dependencies
-
-      - name: Install Necessary Dependencies
-        run: pip install -r .github/requirements.txt
-
-      - name: Build & Deploy using mkdocs
-        run: mkdocs gh-deploy --force -f .github/mkdocs.yml

.github/workflows/github-pages.yml

@@ -0,0 +1,23 @@
+name: GitHub Pages Deploy
+on:
+  push:
+    branches:
+      - master
+      - main
+permissions:
+  contents: write
+jobs:
+  deploy:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v4
+        with:
+          python-version: 3.x
+      - uses: actions/cache@v4
+        with:
+          key: ${{ github.ref }}
+          path: .cache
+      - run: pip install mkdocs-material
+      - run: pip install pillow cairosvg
+      - run: mkdocs gh-deploy --force

.github/workflows/issue-slash-commands.yaml

@@ -1,13 +1,11 @@
-name: Issue slash commands
+name: Close issue on /close
 
 on:
   issue_comment:
     types: [created, edited]
 
 jobs:
-  issueCommands:
+  closeIssueOnClose:
-    # Skip this job if the comment was created/edited on a PR
-    if: ${{ !github.event.issue.pull_request }}
     runs-on: ubuntu-latest
     permissions:
       issues: write
@@ -15,101 +13,31 @@ jobs:
       contents: read
 
     steps:
-      - run: echo "command=false" >> $GITHUB_ENV
+      - name: Check for /close comment
-
+        id: check_comment
-      - name: Check for /label command
-        id: check_label_command
-        run: |
-          if [[ "${{ contains(github.event.comment.body, '/label') }}" == "true" ]]; then
-            echo "command=true" >> $GITHUB_ENV
-            LABEL_NAME=$(echo "${{ github.event.comment.body }}" | awk -F"/label" '/\/label/ { match($2, /'\''([^'\'']*)'\''/, arr); if (arr[1] != "") print arr[1] }')
-            echo "label_command=true" >> $GITHUB_ENV
-            echo "label_name=${LABEL_NAME}" >> $GITHUB_ENV
-          else
-            echo "label_command=false" >> $GITHUB_ENV
-          fi
-
-      - name: Check for /unlabel command
-        id: check_unlabel_command
-        run: |
-          if [[ "${{ contains(github.event.comment.body, '/unlabel') }}" == "true" ]]; then
-            echo "command=true" >> $GITHUB_ENV
-            UNLABEL_NAME=$(echo "${{ github.event.comment.body }}" | awk -F"/unlabel" '/\/unlabel/ { match($2, /'\''([^'\'']*)'\''/, arr); if (arr[1] != "") print arr[1] }')
-            echo "unlabel_command=true" >> $GITHUB_ENV
-            echo "unlabel_name=${UNLABEL_NAME}" >> $GITHUB_ENV
-          else
-            echo "unlabel_command=false" >> $GITHUB_ENV
-          fi
-
-      - name: Check for /close command
-        id: check_close_command
         run: |
           if [[ "${{ contains(github.event.comment.body, '/close') }}" == "true" ]]; then
-            echo "command=true" >> $GITHUB_ENV
+            echo "comment=true" >> $GITHUB_ENV
-            echo "close_command=true" >> $GITHUB_ENV
-            echo "reopen_command=false" >> $GITHUB_ENV
           else
-            echo "close_command=false" >> $GITHUB_ENV
+            echo "comment=false" >> $GITHUB_ENV
-          fi
-
-      - name: Check for /open or /reopen command
-        id: check_reopen_command
-        run: |
-          if [[ "${{ contains(github.event.comment.body, '/open') }}" == "true" ]] || [[ "${{ contains(github.event.comment.body, '/reopen') }}" == "true" ]]; then
-            echo "command=true" >> $GITHUB_ENV
-            echo "reopen_command=true" >> $GITHUB_ENV
-            echo "close_command=false" >> $GITHUB_ENV
-          else
-            echo "reopen_command=false" >> $GITHUB_ENV
           fi
 
       - name: Check if the user is allowed
         id: check_user
-        if: env.command == 'true'
+        if: env.comment == 'true'
         run: |
-          ALLOWED_USERS=("ChrisTitusTech" "og-mrk" "Marterich" "MyDrift-user" "Real-MullaC" "CodingWonders")
+          ALLOWED_USERS=("ChrisTitusTech" "og-mrk" "Marterich" "MyDrift-user" "Real-MullaC")
           if [[ " ${ALLOWED_USERS[@]} " =~ " ${{ github.event.comment.user.login }} " ]]; then
             echo "user=true" >> $GITHUB_ENV
           else
-            exit 0
+            echo "user=false" >> $GITHUB_ENV
           fi
 
-      - name: Close issue
+      - name: Close issue if conditions are met
-        if: env.close_command == 'true'
+        if: env.comment == 'true' && env.user == 'true'
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           ISSUE_NUMBER: ${{ github.event.issue.number }}
         run: |
           echo Closing the issue...
-          if [[ "${{ contains(github.event.comment.body, 'not planned') }}" == "true" ]]; then
+          gh issue close $ISSUE_NUMBER --repo ${{ github.repository }}
-            gh issue close $ISSUE_NUMBER --repo ${{ github.repository }} --reason 'not planned'
-          else
-            gh issue close $ISSUE_NUMBER --repo ${{ github.repository }}
-          fi
-
-      - name: Reopen issue
-        if: env.reopen_command == 'true'
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          ISSUE_NUMBER: ${{ github.event.issue.number }}
-        run: |
-          echo Reopening the issue...
-          gh issue reopen $ISSUE_NUMBER --repo ${{ github.repository }}
-
-      - name: Label issue
-        if: env.label_command == 'true'
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          ISSUE_NUMBER: ${{ github.event.issue.number }}
-        run: |
-          echo Labeling the issue...
-          gh issue edit $ISSUE_NUMBER --repo ${{ github.repository }} --add-label "${{ env.label_name }}"
-
-      - name: Remove labels
-        if: env.unlabel_command == 'true'
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          ISSUE_NUMBER: ${{ github.event.issue.number }}
-        run: |
-          echo Unlabeling the issue...
-          gh issue edit $ISSUE_NUMBER --repo ${{ github.repository }} --remove-label "${{ env.unlabel_name }}"

.github/workflows/pre-release.yaml

@@ -5,71 +5,48 @@ permissions:
   actions: read
 
 on:
+  workflow_run:
+    workflows: ["Compile"]
+    types:
+      - completed
   workflow_dispatch: # Manual trigger added
 
 jobs:
   build-runspace:
     runs-on: windows-latest
-    env:
-      CERTIFICATE_BASE64: ${{ secrets.CERTIFICATE_BASE64 }}
     steps:
       - name: Checkout Repository
         uses: actions/checkout@v4
 
-      - name: Compile project
+      - name: Extract Version from winutil.ps1
-        shell: pwsh
-        run: |
-          Set-ExecutionPolicy Bypass -Scope Process -Force; ./Compile.ps1
-        continue-on-error: false # Directly fail the job on error, removing the need for a separate check
-
-      - name: Set Version to Todays Date
         id: extract_version
         run: |
           $version = (Get-Date -Format "yy.MM.dd")
-          echo "VERSION=$version" >> $env:GITHUB_ENV
+          echo "version=$version" >> $env:GITHUB_ENV
         shell: pwsh
 
       - name: Create Tag
         id: create_tag
         run: |
           $tagExists = git tag -l $env:VERSION
-          if ($tagExists -eq "") {
+          if (-not $tagExists) {
             git tag $env:VERSION
-            if ($LASTEXITCODE -ne 0) {
-              Write-Error "Failed to create tag $env:VERSION"
-              exit 1
-            }
             git push origin $env:VERSION
-            if ($LASTEXITCODE -ne 0) {
-              Write-Error "Failed to push tag $env:VERSION"
-              exit 1
-            }
           } else {
             Write-Host "Tag $env:VERSION already exists, skipping tag creation"
           }
         shell: pwsh
 
-      - name: Generate Release Notes
-        id: generate_notes
-        uses: release-drafter/release-drafter@v6
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        with:
-          config-name: release-drafter.yml
-          version: ${{ env.VERSION }} # Pass the version variable
-
       - name: Create and Upload Release
         id: create_release
         uses: softprops/action-gh-release@v2
         with:
           tag_name: ${{ env.VERSION }}
           name: Pre-Release ${{ env.VERSION }}
-          body: |
+          body: "![GitHub Downloads (specific asset, specific tag)](https://img.shields.io/github/downloads/ChrisTitusTech/winutil/${{ steps.extract_version.outputs.version }}/winutil.ps1)"
-            ${{ steps.generate_notes.outputs.body }}
-
-            ![GitHub Downloads (specific asset, specific tag)](https://img.shields.io/github/downloads/ChrisTitusTech/winutil/${{ env.VERSION }}/winutil.ps1)
           append_body: false
           files: ./winutil.ps1
           prerelease: true
+          generate_release_notes: true
         env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/release.yaml

@@ -0,0 +1,44 @@
+name: Release WinUtil
+
+on:
+  workflow_dispatch: # Manual trigger added
+
+jobs:
+  build-runspace:
+    runs-on: windows-latest
+    outputs:
+      version: ${{ steps.extract_version.outputs.version }}
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v4
+
+      - name: Extract Version from winutil.ps1
+        id: extract_version
+        run: |
+          $version = ''
+          Get-Content ./winutil.ps1 -TotalCount 30 | ForEach-Object {
+            if ($_ -match 'Version\s*:\s*(\d{2}\.\d{2}\.\d{2})') {
+              $version = $matches[1]
+              echo "version=$version" >> $GITHUB_OUTPUT
+              break
+            }
+          }
+          if (-not $version) {
+            Write-Error "Version not found in winutil.ps1"
+            exit 1
+          }
+        shell: pwsh
+
+      - name: Create and Upload Release
+        id: create_release
+        uses: softprops/action-gh-release@v2
+        with:
+          tag_name: ${{ steps.extract_version.outputs.version }}
+          name: Release ${{ steps.extract_version.outputs.version }}
+          body: "![GitHub Downloads (specific asset, specific tag)](https://img.shields.io/github/downloads/ChrisTitusTech/winutil/${{ steps.extract_version.outputs.version }}/winutil.ps1)"
+          append_body: true
+          files: ./winutil.ps1
+          prerelease: false
+          make_latest: "true"
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/remove-winutil.yaml

@@ -1,34 +0,0 @@
-name: Remove winutil.ps1 if included in a Push
-
-on:
-  push:
-    branches:
-      - '**'
-
-jobs:
-  check-and-delete-file:
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout code
-      uses: actions/checkout@v4
-
-    - name: Check if winutil.ps1 exists
-      id: check_existence
-      run: |
-        if [ -f "winutil.ps1" ]; then
-          echo "winutil_exists=true" >> $GITHUB_OUTPUT
-        else
-          echo "winutil_exists=false" >> $GITHUB_OUTPUT
-        fi
-
-    - name: Delete winutil.ps1 if it exists
-      if: steps.check_existence.outputs.winutil_exists == 'true'
-      run: |
-        git config --global user.email "winutil-action@noreply.github.com"
-        git config --global user.name "winutil-action"
-        git rm winutil.ps1
-        git commit -m "Delete winutil.ps1 as it is not allowed"
-        git push origin HEAD:${{ github.ref }}
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/sponsors.yml

@@ -8,7 +8,6 @@ permissions:
 jobs:
   deploy:
     runs-on: ubuntu-latest
-    if: (github.event_name == 'schedule' && github.repository == 'ChrisTitusTech/winutil') || (github.event_name != 'schedule')
     steps:
       - name: Checkout 🛎️
         uses: actions/checkout@v4
@@ -23,4 +22,4 @@ jobs:
         uses: JamesIves/github-pages-deploy-action@v4
         with:
           branch: main
-          folder: '.'
+          folder: '.'

.github/workflows/unittests.yaml

@@ -37,4 +37,4 @@ jobs:
 
       shell: pwsh
       env:
-        TEMP: ${{ runner.temp }}
+        TEMP: ${{ runner.temp }}

.gitignore

@@ -2,7 +2,6 @@
 
 # Configuration folder
 .vscode/
-.idea/
 
 ### Visual Studio ###
 
@@ -11,9 +10,6 @@
 
 winutil.pdb
 
-### Preprocessor Hashes ###
-.preprocessor_hashes.json
-
 ### Windows ###
 
 # Folder config file
@@ -49,8 +45,3 @@ microwin.log
 True
 test.ps1
 winutil.ps1
-
-# temporary excludes for docs
-.github/site/
-
-binary/

Compile.ps1

@@ -1,23 +1,13 @@
 param (
     [switch]$Debug,
-    [switch]$Run,
+    [switch]$Run
-    [string]$Arguments
 )
-
-if ((Get-Item ".\winutil.ps1" -ErrorAction SilentlyContinue).IsReadOnly) {
-    Remove-Item ".\winutil.ps1" -Force
-}
-
 $OFS = "`r`n"
 $scriptname = "winutil.ps1"
-$workingdir = $PSScriptRoot
-
-Push-Location
-Set-Location $workingdir
 
 # Variable to sync between runspaces
 $sync = [Hashtable]::Synchronized(@{})
-$sync.PSScriptRoot = $workingdir
+$sync.PSScriptRoot = $PSScriptRoot
 $sync.configs = @{}
 
 function Update-Progress {
@@ -25,12 +15,12 @@ function Update-Progress {
         [Parameter(Mandatory, position=0)]
         [string]$StatusMessage,
 
-        [Parameter(Mandatory, position=1)]
+	[Parameter(Mandatory, position=1)]
-        [ValidateRange(0,100)]
+	[ValidateRange(0,100)]
         [int]$Percent,
 
-        [Parameter(position=2)]
+	[Parameter(position=2)]
-        [string]$Activity = "Compiling"
+	[string]$Activity = "Compiling"
     )
 
     Write-Progress -Activity $Activity -Status $StatusMessage -PercentComplete $Percent
@@ -45,16 +35,6 @@ $header = @"
 "@
 
 
-Update-Progress "Pre-req: Running Preprocessor..." 0
-
-# Dot source the 'Invoke-Preprocessing' Function from 'tools/Invoke-Preprocessing.ps1' Script
-$preprocessingFilePath = ".\tools\Invoke-Preprocessing.ps1"
-. $preprocessingFilePath
-
-$excludedFiles = @('.\.git\', '.\.gitignore', '.\.gitattributes', '.\.github\CODEOWNERS', '.\LICENSE', "$preprocessingFilePath", '*.png', '*.exe','.\.preprocessor_hashes.json')
-$msg = "Pre-req: Code Formatting"
-Invoke-Preprocessing -WorkingDir "$workingdir" -ExcludedFiles $excludedFiles -ProgressStatusMessage $msg
-
 # Create the script in memory.
 Update-Progress "Pre-req: Allocating Memory" 0
 $script_content = [System.Collections.Generic.List[string]]::new()
@@ -63,83 +43,101 @@ Update-Progress "Adding: Header" 5
 $script_content.Add($header)
 
 Update-Progress "Adding: Version" 10
-$script_content.Add($(Get-Content "scripts\start.ps1").replace('#{replaceme}',"$(Get-Date -Format yy.MM.dd)"))
+$script_content.Add($(Get-Content .\scripts\start.ps1).replace('#{replaceme}',"$(Get-Date -Format yy.MM.dd)"))
 
 Update-Progress "Adding: Functions" 20
-Get-ChildItem "functions" -Recurse -File | ForEach-Object {
+Get-ChildItem .\functions -Recurse -File | ForEach-Object {
     $script_content.Add($(Get-Content $psitem.FullName))
     }
 Update-Progress "Adding: Config *.json" 40
-Get-ChildItem "config" | Where-Object {$psitem.extension -eq ".json"} | ForEach-Object {
+Get-ChildItem .\config | Where-Object {$psitem.extension -eq ".json"} | ForEach-Object {
-    $json = (Get-Content $psitem.FullName -Raw)
+
-    $jsonAsObject = $json | ConvertFrom-Json
+    $json = (Get-Content $psitem.FullName).replace("'","''")
+
+    # Replace every XML Special Character so it'll render correctly in final build
+    # Only do so if json files has content to be displayed (for example the applications, tweaks, features json files)
+        # Make an Array List containing every name at first level of Json File
+        $jsonAsObject = $json | convertfrom-json
+        $firstLevelJsonList = [System.Collections.ArrayList]::new()
+        $jsonAsObject.PSObject.Properties.Name | ForEach-Object {$null = $firstLevelJsonList.Add($_)}
+        # Note:
+        #  Avoid using HTML Entity Codes, for example '”' (stands for "Right Double Quotation Mark"),
+        #  Use **HTML decimal/hex codes instead**, as using HTML Entity Codes will result in XML parse Error when running the compiled script.
+        for ($i = 0; $i -lt $firstLevelJsonList.Count; $i += 1) {
+            $firstLevelName = $firstLevelJsonList[$i]
+	    if ($jsonAsObject.$firstLevelName.content -ne $null) {
+                $jsonAsObject.$firstLevelName.content = $jsonAsObject.$firstLevelName.content.replace('&','&#38;').replace('“','&#8220;').replace('”','&#8221;').replace("'",'&#39;').replace('<','&#60;').replace('>','&#62;').replace('—','&#8212;')
+                $jsonAsObject.$firstLevelName.content = $jsonAsObject.$firstLevelName.content.replace('&#39;&#39;',"&#39;") # resolves the Double Apostrophe caused by the first replace function in the main loop
+            }
+            if ($jsonAsObject.$firstLevelName.description -ne $null) {
+                $jsonAsObject.$firstLevelName.description = $jsonAsObject.$firstLevelName.description.replace('&','&#38;').replace('“','&#8220;').replace('”','&#8221;').replace("'",'&#39;').replace('<','&#60;').replace('>','&#62;').replace('—','&#8212;')
+                $jsonAsObject.$firstLevelName.description = $jsonAsObject.$firstLevelName.description.replace('&#39;&#39;',"&#39;") # resolves the Double Apostrophe caused by the first replace function in the main loop
+	    }
+	}
 
     # Add 'WPFInstall' as a prefix to every entry-name in 'applications.json' file
     if ($psitem.Name -eq "applications.json") {
-        foreach ($appEntryName in $jsonAsObject.PSObject.Properties.Name) {
+        for ($i = 0; $i -lt $firstLevelJsonList.Count; $i += 1) {
+            $appEntryName = $firstLevelJsonList[$i]
             $appEntryContent = $jsonAsObject.$appEntryName
+            # Remove the entire app entry, so we could add it later with a different name
             $jsonAsObject.PSObject.Properties.Remove($appEntryName)
+            # Add the app entry, but with a different name (WPFInstall + The App Entry Name)
             $jsonAsObject | Add-Member -MemberType NoteProperty -Name "WPFInstall$appEntryName" -Value $appEntryContent
         }
     }
 
-    # Line 90 requires no whitespace inside the here-strings, to keep formatting of the JSON in the final script.
+    # The replace at the end is required, as without it the output of 'converto-json' will be somewhat weird for Multiline Strings
-    $json = @"
+    # Most Notably is the scripts in some json files, making it harder for users who want to review these scripts, which're found in the compiled script
-$($jsonAsObject | ConvertTo-Json -Depth 3)
+    $json = ($jsonAsObject | convertto-json -Depth 3).replace('\r\n',"`r`n")
-"@
 
-    $sync.configs.$($psitem.BaseName) = $json | ConvertFrom-Json
+    $sync.configs.$($psitem.BaseName) = $json | convertfrom-json
-    $script_content.Add($(Write-Output "`$sync.configs.$($psitem.BaseName) = @'`r`n$json`r`n'@ `| ConvertFrom-Json" ))
+    $script_content.Add($(Write-output "`$sync.configs.$($psitem.BaseName) = '$json' `| convertfrom-json" ))
 }
 
-# Read the entire XAML file as a single string, preserving line breaks
+$xaml = (Get-Content .\xaml\inputXML.xaml).replace("'","''")
-$xaml = Get-Content "$workingdir\xaml\inputXML.xaml" -Raw
+
+# Dot-source the Get-TabXaml function
+. .\functions\private\Get-TabXaml.ps1
+
+Update-Progress "Building: Xaml " 75
+$appXamlContent = Get-TabXaml "applications" 5
+$tweaksXamlContent = Get-TabXaml "tweaks"
+$featuresXamlContent = Get-TabXaml "feature"
+
 
 Update-Progress "Adding: Xaml " 90
+# Replace the placeholder in $inputXML with the content of inputApp.xaml
+$xaml = $xaml -replace "{{InstallPanel_applications}}", $appXamlContent
+$xaml = $xaml -replace "{{InstallPanel_tweaks}}", $tweaksXamlContent
+$xaml = $xaml -replace "{{InstallPanel_features}}", $featuresXamlContent
 
-# Add the XAML content to $script_content using a here-string
+$script_content.Add($(Write-output "`$inputXML =  '$xaml'"))
-$script_content.Add(@"
-`$inputXML = @'
-$xaml
-'@
-"@)
 
-$script_content.Add($(Get-Content "scripts\main.ps1"))
+$script_content.Add($(Get-Content .\scripts\main.ps1))
 
-if ($Debug) {
+if ($Debug){
     Update-Progress "Writing debug files" 95
-    $appXamlContent | Out-File -FilePath "xaml\inputApp.xaml" -Encoding ascii
+    $appXamlContent | Out-File -FilePath ".\xaml\inputApp.xaml" -Encoding ascii
-    $tweaksXamlContent | Out-File -FilePath "xaml\inputTweaks.xaml" -Encoding ascii
+    $tweaksXamlContent | Out-File -FilePath ".\xaml\inputTweaks.xaml" -Encoding ascii
-    $featuresXamlContent | Out-File -FilePath "xaml\inputFeatures.xaml" -Encoding ascii
+    $featuresXamlContent | Out-File -FilePath ".\xaml\inputFeatures.xaml" -Encoding ascii
-} else {
+}
+else {
     Update-Progress "Removing temporary files" 99
-    Remove-Item "xaml\inputApp.xaml" -ErrorAction SilentlyContinue
+    Remove-Item ".\xaml\inputApp.xaml" -ErrorAction SilentlyContinue
-    Remove-Item "xaml\inputTweaks.xaml" -ErrorAction SilentlyContinue
+    Remove-Item ".\xaml\inputTweaks.xaml" -ErrorAction SilentlyContinue
-    Remove-Item "xaml\inputFeatures.xaml" -ErrorAction SilentlyContinue
+    Remove-Item ".\xaml\inputFeatures.xaml" -ErrorAction SilentlyContinue
 }
 
-Set-Content -Path "$scriptname" -Value ($script_content -join "`r`n") -Encoding ascii
+Set-Content -Path $scriptname -Value ($script_content -join "`r`n") -Encoding ascii
 Write-Progress -Activity "Compiling" -Completed
 
-Update-Progress -Activity "Validating" -StatusMessage "Checking winutil.ps1 Syntax" -Percent 0
+if ($run){
-try {
+    try {
-    Get-Command -Syntax .\winutil.ps1 | Out-Null
+        Start-Process -FilePath "pwsh" -ArgumentList ".\$scriptname"
-} catch {
+    }
-    Write-Warning "Syntax Validation for 'winutil.ps1' has failed"
+    catch {
-    Write-Host "$($Error[0])" -ForegroundColor Red
+        Start-Process -FilePath "powershell" -ArgumentList ".\$scriptname"
-    Pop-Location # Restore previous location before exiting...
+    }
-    exit 1
+
 }
-Write-Progress -Activity "Validating" -Completed
-
-if ($run) {
-    $script = "& '$workingdir\$scriptname' $Arguments"
-
-    $powershellcmd = if (Get-Command pwsh -ErrorAction SilentlyContinue) { "pwsh" } else { "powershell" }
-    $processCmd = if (Get-Command wt.exe -ErrorAction SilentlyContinue) { "wt.exe" } else { $powershellcmd }
-
-    Start-Process $processCmd -ArgumentList "$powershellcmd -NoProfile -Command $script"
-
-    break
-}
-Pop-Location

LICENSE

@@ -1,6 +1,6 @@
 MIT License
 
-Copyright (c) 2022 CT Tech Group LLC
+Copyright (c) 2022 Chris Titus
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

README.md

@@ -3,28 +3,28 @@
 [![Version](https://img.shields.io/github/v/release/ChrisTitusTech/winutil?color=%230567ff&label=Latest%20Release&style=for-the-badge)](https://github.com/ChrisTitusTech/winutil/releases/latest)
 ![GitHub Downloads (specific asset, all releases)](https://img.shields.io/github/downloads/ChrisTitusTech/winutil/winutil.ps1?label=Total%20Downloads&style=for-the-badge)
 [![](https://dcbadge.limes.pink/api/server/https://discord.gg/RUbZUZyByQ?theme=default-inverted&style=for-the-badge)](https://discord.gg/RUbZUZyByQ)
-[![Static Badge](https://img.shields.io/badge/Documentation-_?style=for-the-badge&logo=bookstack&color=grey)](https://winutil.christitus.com/)
 
 This utility is a compilation of Windows tasks I perform on each Windows system I use. It is meant to streamline *installs*, debloat with *tweaks*, troubleshoot with *config*, and fix Windows *updates*. I am extremely picky about any contributions to keep this project clean and efficient.
 
-![screen-install](./docs/assets/Title-Screen.png)
+![screen-install](./docs/assets/screen-install.png)
 
 ## 💡 Usage
 
-Winutil must be run in Admin mode because it performs system-wide tweaks. To achieve this, run PowerShell as an administrator. Here are a few ways to do it:
+Winutil must be run in Admin mode because it performs system-wide tweaks. To achieve this, open PowerShell or Windows Terminal as an administrator. Here are a few ways to do it:
 
-1. **Start menu Method:**
+1. **Right-Click Method:**
    - Right-click on the start menu.
    - Choose "Windows PowerShell (Admin)" (for Windows 10) or "Terminal (Admin)" (for Windows 11).
 
 2. **Search and Launch Method:**
    - Press the Windows key.
    - Type "PowerShell" or "Terminal" (for Windows 11).
-   - Press `Ctrl + Shift + Enter` or Right-click and choose "Run as administrator" to launch it with administrator privileges.
+   - Press `Ctrl + Shift + Enter` to launch it with administrator privileges.
+
 
 ### Launch Command
 
-#### Stable Branch (Recommended)
+#### Stable Branch
 
 ```ps1
 irm "https://christitus.com/win" | iex
@@ -35,16 +35,17 @@ irm "https://christitus.com/win" | iex
 irm "https://christitus.com/windev" | iex
 ```
 
-If you have Issues, refer to [Known Issues](https://winutil.christitus.com/knownissues/)
+If you have Issues, refer to [Known Issues](https://christitustech.github.io/winutil/KnownIssues/)
 
 ## 🎓 Documentation
 
-### [WinUtil Official Documentation](https://winutil.christitus.com/)
+### [WinUtil Official Documentation](https://christitustech.github.io/winutil/)
 
 ### [YouTube Tutorial](https://www.youtube.com/watch?v=6UQZ5oQg8XA)
 
 ### [ChrisTitus.com Article](https://christitus.com/windows-tool/)
 
+
 ## 💖 Support
 - To morally and mentally support the project, make sure to leave a ⭐️!
 - EXE Wrapper for $10 @ https://www.cttstore.com/windows-toolbox
@@ -53,7 +54,7 @@ If you have Issues, refer to [Known Issues](https://winutil.christitus.com/known
 
 These are the sponsors that help keep this project alive with monthly contributions.
 
-<!-- sponsors --><a href="https://github.com/TriHydera"><img src="https:&#x2F;&#x2F;github.com&#x2F;TriHydera.png" width="60px" alt="User avatar: TriHydera" /></a><a href="https://github.com/DelDongo"><img src="https:&#x2F;&#x2F;github.com&#x2F;DelDongo.png" width="60px" alt="User avatar: " /></a><a href="https://github.com/markamos"><img src="https:&#x2F;&#x2F;github.com&#x2F;markamos.png" width="60px" alt="User avatar: Mark Amos" /></a><a href="https://github.com/dwelfusius"><img src="https:&#x2F;&#x2F;github.com&#x2F;dwelfusius.png" width="60px" alt="User avatar: " /></a><a href="https://github.com/mews-se"><img src="https:&#x2F;&#x2F;github.com&#x2F;mews-se.png" width="60px" alt="User avatar: Martin Stockzell" /></a><a href="https://github.com/jdiegmueller"><img src="https:&#x2F;&#x2F;github.com&#x2F;jdiegmueller.png" width="60px" alt="User avatar: Jason A. Diegmueller" /></a><a href="https://github.com/robertsandrock"><img src="https:&#x2F;&#x2F;github.com&#x2F;robertsandrock.png" width="60px" alt="User avatar: RMS" /></a><a href="https://github.com/KenichiQaz"><img src="https:&#x2F;&#x2F;github.com&#x2F;KenichiQaz.png" width="60px" alt="User avatar: Stefan" /></a><a href="https://github.com/paulsheets"><img src="https:&#x2F;&#x2F;github.com&#x2F;paulsheets.png" width="60px" alt="User avatar: Paul" /></a><a href="https://github.com/djones369"><img src="https:&#x2F;&#x2F;github.com&#x2F;djones369.png" width="60px" alt="User avatar: Dave J. - WhamGeek" /></a><a href="https://github.com/anthonymendez"><img src="https:&#x2F;&#x2F;github.com&#x2F;anthonymendez.png" width="60px" alt="User avatar: Anthony Mendez" /></a><a href="https://github.com/FatBastard0"><img src="https:&#x2F;&#x2F;github.com&#x2F;FatBastard0.png" width="60px" alt="User avatar: " /></a><a href="https://github.com/DursleyGuy"><img src="https:&#x2F;&#x2F;github.com&#x2F;DursleyGuy.png" width="60px" alt="User avatar: DursleyGuy" /></a><a href="https://github.com/realmuddy"><img src="https:&#x2F;&#x2F;github.com&#x2F;realmuddy.png" width="60px" alt="User avatar: Phillip Waters" /></a><a href="https://github.com/quaszi"><img src="https:&#x2F;&#x2F;github.com&#x2F;quaszi.png" width="60px" alt="User avatar: " /></a><a href="https://github.com/DwayneTheRockLobster1"><img src="https:&#x2F;&#x2F;github.com&#x2F;DwayneTheRockLobster1.png" width="60px" alt="User avatar: " /></a><a href="https://github.com/KieraKujisawa"><img src="https:&#x2F;&#x2F;github.com&#x2F;KieraKujisawa.png" width="60px" alt="User avatar: Kiera Meredith" /></a><a href="https://github.com/craigccfl"><img src="https:&#x2F;&#x2F;github.com&#x2F;craigccfl.png" width="60px" alt="User avatar: CraigW" /></a><a href="https://github.com/RoelCrabbe"><img src="https:&#x2F;&#x2F;github.com&#x2F;RoelCrabbe.png" width="60px" alt="User avatar: Roel Crabbé" /></a><a href="https://github.com/Data-Syd"><img src="https:&#x2F;&#x2F;github.com&#x2F;Data-Syd.png" width="60px" alt="User avatar: Data Syd" /></a><!-- sponsors -->
+<!-- sponsors --><a href="https://github.com/GregoryNavasarkian"><img src="https://github.com/GregoryNavasarkian.png" width="60px" alt="Gregory Navasarkian" /></a><a href="https://github.com/ysaito8015"><img src="https://github.com/ysaito8015.png" width="60px" alt="Yusuke Saito" /></a><a href="https://github.com/TriHydera"><img src="https://github.com/TriHydera.png" width="60px" alt="TriHydera" /></a><a href="https://github.com/jozozovko"><img src="https://github.com/jozozovko.png" width="60px" alt="" /></a><a href="https://github.com/DelDongo"><img src="https://github.com/DelDongo.png" width="60px" alt="" /></a><a href="https://github.com/markamos"><img src="https://github.com/markamos.png" width="60px" alt="Mark Amos" /></a><a href="https://github.com/dwelfusius"><img src="https://github.com/dwelfusius.png" width="60px" alt="" /></a><a href="https://github.com/mews-se"><img src="https://github.com/mews-se.png" width="60px" alt="" /></a><a href="https://github.com/jdiegmueller"><img src="https://github.com/jdiegmueller.png" width="60px" alt="Jason A. Diegmueller" /></a><a href="https://github.com/AlanTristar"><img src="https://github.com/AlanTristar.png" width="60px" alt="" /></a><a href="https://github.com/JennJones89"><img src="https://github.com/JennJones89.png" width="60px" alt="" /></a><a href="https://github.com/broganbranstetter"><img src="https://github.com/broganbranstetter.png" width="60px" alt="Brogan Branstetter" /></a><a href="https://github.com/zepled112"><img src="https://github.com/zepled112.png" width="60px" alt="wyatt" /></a><a href="https://github.com/TDWillingham"><img src="https://github.com/TDWillingham.png" width="60px" alt="MetalliDan28" /></a><a href="https://github.com/frankolivares"><img src="https://github.com/frankolivares.png" width="60px" alt="" /></a><a href="https://github.com/Cube707"><img src="https://github.com/Cube707.png" width="60px" alt="Jan Wille" /></a><a href="https://github.com/Owen-3456"><img src="https://github.com/Owen-3456.png" width="60px" alt="Owen" /></a><a href="https://github.com/altugtekiner"><img src="https://github.com/altugtekiner.png" width="60px" alt="" /></a><a href="https://github.com/getsmor"><img src="https://github.com/getsmor.png" width="60px" alt="" /></a><a href="https://github.com/robertsandrock"><img src="https://github.com/robertsandrock.png" width="60px" alt="" /></a><a href="https://github.com/jeffnesbit"><img src="https://github.com/jeffnesbit.png" width="60px" alt="" /></a><a href="https://github.com/mmomega"><img src="https://github.com/mmomega.png" width="60px" alt="" /></a><a href="https://github.com/KenichiQaz"><img src="https://github.com/KenichiQaz.png" width="60px" alt="Stefan" /></a><!-- sponsors -->
 
 ## 🏅 Thanks to all Contributors
 Thanks a lot for spending your time helping Winutil grow. Thanks a lot! Keep rocking 🍻.

Test-WingetInstall.ps1

@@ -1,16 +0,0 @@
-# Import the function (adjust the path according to your setup)
-. "./functions/private/Install-WinUtilWinget.ps1"
-. "./functions/private/Test-WinUtilPackageManager.ps1"
-
-# Set up Information stream to be visible
-$InformationPreference = "Continue"
-
-Write-Host "Starting Winget installation test..." -ForegroundColor Cyan
-
-try {
-    Install-WinUtilWinget
-} catch {
-    Write-Host "Error occurred during testing: $($_.Exception.Message)" -ForegroundColor Red
-    Write-Host "Stack Trace:" -ForegroundColor Red
-    $_.ScriptStackTrace
-}

config/appnavigation.json

@@ -1,62 +0,0 @@
-{
-    "WPFInstall": {
-        "Content": "Install/Upgrade Applications",
-        "Category": "____Actions",
-        "Type": "Button",
-        "Order": "1",
-        "Description": "Install or upgrade the selected applications"
-    },
-    "WPFUninstall": {
-        "Content": "Uninstall Applications",
-        "Category": "____Actions",
-        "Type": "Button",
-        "Order": "2",
-        "Description": "Uninstall the selected applications"
-    },
-    "WPFInstallUpgrade": {
-        "Content": "Upgrade all Applications",
-        "Category": "____Actions",
-        "Type": "Button",
-        "Order": "3",
-        "Description": "Upgrade all applications to the latest version"
-    },
-    "WingetRadioButton": {
-        "Content": "Winget",
-        "Category": "__Package Manager",
-        "Type": "RadioButton",
-        "GroupName": "PackageManagerGroup",
-        "Checked": true,
-        "Order": "1",
-        "Description": "Use Winget for package management"
-    },
-    "ChocoRadioButton": {
-        "Content": "Chocolatey",
-        "Category": "__Package Manager",
-        "Type": "RadioButton",
-        "GroupName": "PackageManagerGroup",
-        "Checked": false,
-        "Order": "2",
-        "Description": "Use Chocolatey for package management"
-    },
-    "WPFClearInstallSelection": {
-        "Content": "Clear Selection",
-        "Category": "__Selection",
-        "Type": "Button",
-        "Order": "1",
-        "Description": "Clear the selection of applications"
-    },
-    "WPFGetInstalled": {
-        "Content": "Get Installed",
-        "Category": "__Selection",
-        "Type": "Button",
-        "Order": "2",
-        "Description": "Show installed applications"
-    },
-    "WPFselectedAppsButton": {
-        "Content": "Selected Apps: 0",
-        "Category": "__Selection",
-        "Type": "Button",
-        "Order": "3",
-        "Description": "Show the selected applications"
-    }
-}

config/autounattend.xml

@@ -1,442 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<unattend xmlns="urn:schemas-microsoft-com:unattend" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
-    <!--https://schneegans.de/windows/unattend-generator/?LanguageMode=Unattended&UILanguage=en-US&Locale=en-US&Keyboard=00000409&GeoLocation=244&ProcessorArchitecture=amd64&BypassRequirementsCheck=true&BypassNetworkCheck=true&ComputerNameMode=Random&TimeZoneMode=Implicit&PartitionMode=Interactive&WindowsEditionMode=Unattended&WindowsEdition=pro&UserAccountMode=Unattended&AccountName0=User&AccountPassword0=&AccountGroup0=Administrators&AccountName1=&AccountName2=&AccountName3=&AccountName4=&AutoLogonMode=Own&PasswordExpirationMode=Unlimited&LockoutMode=Default&HideFiles=Hidden&DisableWidgets=true&ClassicContextMenu=true&DisableFastStartup=true&EnableLongPaths=true&DisableAppSuggestions=true&PreventDeviceEncryption=true&WifiMode=Skip&ExpressSettings=DisableAll&Remove3DViewer=true&RemoveBingSearch=true&RemoveCamera=true&RemoveClipchamp=true&RemoveClock=true&RemoveCopilot=true&RemoveCortana=true&RemoveDevHome=true&RemoveFamily=true&RemoveFeedbackHub=true&RemoveGetHelp=true&RemoveInternetExplorer=true&RemoveMailCalendar=true&RemoveMaps=true&RemoveMathInputPanel=true&RemoveZuneVideo=true&RemoveNews=true&RemoveNotepad=true&RemoveOffice365=true&RemoveOneDrive=true&RemoveOneNote=true&RemoveOpenSSHClient=true&RemoveOutlook=true&RemovePaint3D=true&RemovePeople=true&RemovePowerAutomate=true&RemoveQuickAssist=true&RemoveSkype=true&RemoveSolitaire=true&RemoveStepsRecorder=true&RemoveStickyNotes=true&RemoveTeams=true&RemoveGetStarted=true&RemoveToDo=true&RemoveVoiceRecorder=true&RemoveWeather=true&RemoveWindowsMediaPlayer=true&RemoveZuneMusic=true&RemoveWordPad=true&WdacMode=Skip-->
-    <settings pass="offlineServicing"></settings>
-    <settings pass="windowsPE">
-        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
-            <SetupUILanguage>
-                <UILanguage>en-US</UILanguage>
-            </SetupUILanguage>
-            <InputLocale>0409:00000409</InputLocale>
-            <SystemLocale>en-US</SystemLocale>
-            <UILanguage>en-US</UILanguage>
-            <UserLocale>en-US</UserLocale>
-        </component>
-        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
-            <UserData>
-                <ProductKey>
-                    <Key>VK7JG-NPHTM-C97JM-9MPGT-3V66T</Key>
-                </ProductKey>
-                <AcceptEula>true</AcceptEula>
-            </UserData>
-            <RunSynchronous>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>1</Order>
-                    <Path>reg.exe add "HKLM\SYSTEM\Setup\LabConfig" /v BypassTPMCheck /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>2</Order>
-                    <Path>reg.exe add "HKLM\SYSTEM\Setup\LabConfig" /v BypassSecureBootCheck /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>3</Order>
-                    <Path>reg.exe add "HKLM\SYSTEM\Setup\LabConfig" /v BypassRAMCheck /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-            </RunSynchronous>
-        </component>
-    </settings>
-    <settings pass="generalize"></settings>
-    <settings pass="specialize">
-        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
-            <RunSynchronous>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>1</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE" /v BypassNRO /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>2</Order>
-                    <Path>reg.exe load "HKU\DefaultUser" "C:\Users\Default\NTUSER.DAT"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>3</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\Runonce" /v "UninstallCopilot" /t REG_SZ /d "powershell.exe -NoProfile -Command \"Get-AppxPackage -Name 'Microsoft.Windows.Ai.Copilot.Provider' | Remove-AppxPackage;\"" /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>4</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Policies\Microsoft\Windows\WindowsCopilot" /v TurnOffWindowsCopilot /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>5</Order>
-                    <Path>reg.exe unload "HKU\DefaultUser"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>6</Order>
-                    <Path>reg.exe delete "HKLM\SOFTWARE\Microsoft\WindowsUpdate\Orchestrator\UScheduler_Oobe\DevHomeUpdate" /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>7</Order>
-                    <Path>reg.exe load "HKU\DefaultUser" "C:\Users\Default\NTUSER.DAT"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>8</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Notepad" /v ShowStoreBanner /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>9</Order>
-                    <Path>reg.exe unload "HKU\DefaultUser"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>10</Order>
-                    <Path>cmd.exe /c "del "C:\Users\Default\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\OneDrive.lnk""</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>11</Order>
-                    <Path>cmd.exe /c "del "C:\Windows\System32\OneDriveSetup.exe""</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>12</Order>
-                    <Path>cmd.exe /c "del "C:\Windows\SysWOW64\OneDriveSetup.exe""</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>13</Order>
-                    <Path>reg.exe load "HKU\DefaultUser" "C:\Users\Default\NTUSER.DAT"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>14</Order>
-                    <Path>reg.exe delete "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\Run" /v OneDriveSetup /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>15</Order>
-                    <Path>reg.exe unload "HKU\DefaultUser"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>16</Order>
-                    <Path>reg.exe delete "HKLM\SOFTWARE\Microsoft\WindowsUpdate\Orchestrator\UScheduler_Oobe\OutlookUpdate" /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>17</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Communications" /v ConfigureChatAutoInstall /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>18</Order>
-                    <Path>powershell.exe -NoProfile -Command "$xml = [xml]::new(); $xml.Load('C:\Windows\Panther\unattend.xml'); $sb = [scriptblock]::Create( $xml.unattend.Extensions.ExtractScript ); Invoke-Command -ScriptBlock $sb -ArgumentList $xml;"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>19</Order>
-                    <Path>powershell.exe -NoProfile -Command "Get-Content -LiteralPath 'C:\Windows\Temp\Microwin-RemovePackages.ps1' -Raw | Invoke-Expression;"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>20</Order>
-                    <Path>powershell.exe -NoProfile -Command "Get-Content -LiteralPath 'C:\Windows\Temp\remove-caps.ps1' -Raw | Invoke-Expression;"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>21</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\PolicyManager\current\device\Start" /v ConfigureStartPins /t REG_SZ /d "{ \"pinnedList\": [] }" /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>22</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\PolicyManager\current\device\Start" /v ConfigureStartPins_ProviderSet /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>23</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\PolicyManager\current\device\Start" /v ConfigureStartPins_WinningProvider /t REG_SZ /d B5292708-1619-419B-9923-E5D9F3925E71 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>24</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\PolicyManager\providers\B5292708-1619-419B-9923-E5D9F3925E71\default\Device\Start" /v ConfigureStartPins /t REG_SZ /d "{ \"pinnedList\": [] }" /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>25</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Microsoft\PolicyManager\providers\B5292708-1619-419B-9923-E5D9F3925E71\default\Device\Start" /v ConfigureStartPins_LastWrite /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>26</Order>
-                    <Path>net.exe accounts /maxpwage:UNLIMITED</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>27</Order>
-                    <Path>reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\FileSystem" /v LongPathsEnabled /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>28</Order>
-                    <Path>reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /v HiberbootEnabled /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>29</Order>
-                    <Path>reg.exe add "HKLM\SOFTWARE\Policies\Microsoft\Dsh" /v AllowNewsAndInterests /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>30</Order>
-                    <Path>reg.exe load "HKU\DefaultUser" "C:\Users\Default\NTUSER.DAT"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>31</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "ContentDeliveryAllowed" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>32</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "FeatureManagementEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>33</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "OEMPreInstalledAppsEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>34</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "PreInstalledAppsEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>35</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "PreInstalledAppsEverEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>36</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SilentInstalledAppsEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>37</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SoftLandingEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>38</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContentEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>39</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContent-310093Enabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>40</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContent-338387Enabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>41</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContent-338388Enabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>42</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContent-338389Enabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>43</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContent-338393Enabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>44</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SubscribedContent-353698Enabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>45</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" /v "SystemPaneSuggestionsEnabled" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>46</Order>
-                    <Path>reg.exe unload "HKU\DefaultUser"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>47</Order>
-                    <Path>reg.exe add "HKLM\Software\Policies\Microsoft\Windows\CloudContent" /v "DisableWindowsConsumerFeatures" /t REG_DWORD /d 0 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>48</Order>
-                    <Path>reg.exe add "HKLM\SYSTEM\CurrentControlSet\Control\BitLocker" /v "PreventDeviceEncryption" /t REG_DWORD /d 1 /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>49</Order>
-                    <Path>reg.exe load "HKU\DefaultUser" "C:\Users\Default\NTUSER.DAT"</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>50</Order>
-                    <Path>reg.exe add "HKU\DefaultUser\Software\Microsoft\Windows\CurrentVersion\Runonce" /v "ClassicContextMenu" /t REG_SZ /d "reg.exe add \"HKCU\Software\Classes\CLSID\{86ca1aa0-34aa-4e8b-a509-50c905bae2a2}\InprocServer32\" /ve /f" /f</Path>
-                </RunSynchronousCommand>
-                <RunSynchronousCommand wcm:action="add">
-                    <Order>51</Order>
-                    <Path>reg.exe unload "HKU\DefaultUser"</Path>
-                </RunSynchronousCommand>
-            </RunSynchronous>
-        </component>
-    </settings>
-    <settings pass="auditSystem"></settings>
-    <settings pass="auditUser"></settings>
-    <settings pass="oobeSystem">
-        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
-            <InputLocale>0409:00000409</InputLocale>
-            <SystemLocale>en-US</SystemLocale>
-            <UILanguage>en-US</UILanguage>
-            <UserLocale>en-US</UserLocale>
-        </component>
-        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS">
-            <UserAccounts>
-                <LocalAccounts>
-                    <LocalAccount wcm:action="add">
-                        <Name>User</Name>
-                        <Group>Administrators</Group>
-                        <Password>
-                            <Value></Value>
-                            <PlainText>true</PlainText>
-                        </Password>
-                    </LocalAccount>
-                </LocalAccounts>
-            </UserAccounts>
-            <AutoLogon>
-                <Username>User</Username>
-                <Enabled>true</Enabled>
-                <LogonCount>1</LogonCount>
-                <Password>
-                    <Value></Value>
-                    <PlainText>true</PlainText>
-                </Password>
-            </AutoLogon>
-            <OOBE>
-                <ProtectYourPC>3</ProtectYourPC>
-                <HideEULAPage>true</HideEULAPage>
-                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
-            </OOBE>
-            <FirstLogonCommands>
-                <SynchronousCommand wcm:action="add">
-                    <Order>1</Order>
-                    <CommandLine>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoLogonCount /t REG_DWORD /d 0 /f</CommandLine>
-                </SynchronousCommand>
-            </FirstLogonCommands>
-        </component>
-    </settings>
-    <Extensions xmlns="https://schneegans.de/windows/unattend-generator/">
-        <ExtractScript>
-param(
-    [xml]$Document
-);
-
-$scriptsDir = 'C:\Windows\Setup\Scripts\';
-foreach( $file in $Document.unattend.Extensions.File ) {
-    $path = [System.Environment]::ExpandEnvironmentVariables(
-        $file.GetAttribute( 'path' )
-    );
-    if( $path.StartsWith( $scriptsDir ) ) {
-        mkdir -Path $scriptsDir -ErrorAction 'SilentlyContinue';
-    }
-    $encoding = switch( [System.IO.Path]::GetExtension( $path ) ) {
-        { $_ -in '.ps1', '.xml' } { [System.Text.Encoding]::UTF8; }
-        { $_ -in '.reg', '.vbs', '.js' } { [System.Text.UnicodeEncoding]::new( $false, $true ); }
-        default { [System.Text.Encoding]::Default; }
-    };
-    [System.IO.File]::WriteAllBytes( $path, ( $encoding.GetPreamble() + $encoding.GetBytes( $file.InnerText.Trim() ) ) );
-}
-        </ExtractScript>
-        <File path="C:\Windows\Temp\Microwin-RemovePackages.ps1">
-$selectors = @(
-    'Microsoft.Microsoft3DViewer';
-    'Microsoft.BingSearch';
-    'Microsoft.WindowsCamera';
-    'Clipchamp.Clipchamp';
-    'Microsoft.WindowsAlarms';
-    'Microsoft.549981C3F5F10';
-    'Microsoft.Windows.DevHome';
-    'MicrosoftCorporationII.MicrosoftFamily';
-    'Microsoft.WindowsFeedbackHub';
-    'Microsoft.GetHelp';
-    'Microsoft.Getstarted';
-    'microsoft.windowscommunicationsapps';
-    'Microsoft.WindowsMaps';
-    'Microsoft.BingNews';
-    'Microsoft.WindowsNotepad';
-    'Microsoft.MicrosoftOfficeHub';
-    'Microsoft.Office.OneNote';
-    'Microsoft.OutlookForWindows';
-    'Microsoft.MSPaint';
-    'Microsoft.People';
-    'Microsoft.PowerAutomateDesktop';
-    'MicrosoftCorporationII.QuickAssist';
-    'Microsoft.SkypeApp';
-    'Microsoft.MicrosoftSolitaireCollection';
-    'Microsoft.MicrosoftStickyNotes';
-    'MSTeams';
-    'Microsoft.Todos';
-    'Microsoft.WindowsSoundRecorder';
-    'Microsoft.BingWeather';
-    'Microsoft.ZuneMusic';
-    'Microsoft.ZuneVideo';
-);
-$getCommand = { Get-AppxProvisionedPackage -Online; };
-$filterCommand = { $_.DisplayName -eq $selector; };
-$removeCommand = {
-  [CmdletBinding()]
-  param(
-    [Parameter( Mandatory, ValueFromPipeline )]
-    $InputObject
-  );
-  process {
-    $InputObject | Remove-AppxProvisionedPackage -AllUsers -Online -ErrorAction 'Continue';
-  }
-};
-$type = 'Package';
-$logfile = 'C:\Windows\Temp\Microwin-RemovePackages.log';
-&amp; {
-    $installed = &amp; $getCommand;
-    foreach( $selector in $selectors ) {
-        $result = [ordered] @{
-            Selector = $selector;
-        };
-        $found = $installed | Where-Object -FilterScript $filterCommand;
-        if( $found ) {
-            $result.Output = $found | &amp; $removeCommand;
-            if( $? ) {
-                $result.Message = "$type removed.";
-            } else {
-                $result.Message = "$type not removed.";
-                $result.Error = $Error[0];
-            }
-        } else {
-            $result.Message = "$type not installed.";
-        }
-        $result | ConvertTo-Json -Depth 3 -Compress;
-    }
-} *&gt;&amp;1 &gt;&gt; $logfile;
-        </File>
-        <File path="C:\Windows\Temp\remove-caps.ps1">
-$selectors = @(
-    'Browser.InternetExplorer';
-    'MathRecognizer';
-    'OpenSSH.Client';
-    'App.Support.QuickAssist';
-    'App.StepsRecorder';
-    'Media.WindowsMediaPlayer';
-    'Microsoft.Windows.WordPad';
-);
-$getCommand = { Get-WindowsCapability -Online; };
-$filterCommand = { ($_.Name -split '~')[0] -eq $selector; };
-$removeCommand = {
-  [CmdletBinding()]
-  param(
-    [Parameter( Mandatory, ValueFromPipeline )]
-    $InputObject
-  );
-  process {
-    $InputObject | Remove-WindowsCapability -Online -ErrorAction 'Continue';
-  }
-};
-$type = 'Capability';
-$logfile = 'C:\Windows\Temp\remove-caps.log';
-&amp; {
-    $installed = &amp; $getCommand;
-    foreach( $selector in $selectors ) {
-        $result = [ordered] @{
-            Selector = $selector;
-        };
-        $found = $installed | Where-Object -FilterScript $filterCommand;
-        if( $found ) {
-            $result.Output = $found | &amp; $removeCommand;
-            if( $? ) {
-                $result.Message = "$type removed.";
-            } else {
-                $result.Message = "$type not removed.";
-                $result.Error = $Error[0];
-            }
-        } else {
-            $result.Message = "$type not installed.";
-        }
-        $result | ConvertTo-Json -Depth 3 -Compress;
-    }
-} *&gt;&amp;1 &gt;&gt; $logfile;
-        </File>
-        <File path="C:\Users\Default\AppData\Local\Microsoft\Windows\Shell\LayoutModification.xml"><![CDATA[
-<LayoutModificationTemplate Version="1" xmlns="http://schemas.microsoft.com/Start/2014/LayoutModification">
-    <LayoutOptions StartTileGroupCellWidth="6" />
-    <DefaultLayoutOverride>
-        <StartLayoutCollection>
-            <StartLayout GroupCellWidth="6" xmlns="http://schemas.microsoft.com/Start/2014/FullDefaultLayout" />
-        </StartLayoutCollection>
-    </DefaultLayoutOverride>
-</LayoutModificationTemplate>
-        ]]></File>
-    </Extensions>
-</unattend>

config/dns.json

@@ -46,23 +46,5 @@
         "Secondary": "94.140.15.16",
         "Primary6": "2a10:50c0::bad1:ff",
         "Secondary6": "2a10:50c0::bad2:ff"
-    },
-    "dns0.eu_Open":{
-        "Primary": "193.110.81.254",
-        "Secondary": "185.253.5.254",
-        "Primary6": "2a0f:fc80::ffff",
-        "Secondary6": "2a0f:fc81::ffff"
-    },
-    "dns0.eu_ZERO":{
-        "Primary": "193.110.81.9",
-        "Secondary": "185.253.5.9",
-        "Primary6": "2a0f:fc80::9",
-        "Secondary6": "2a0f:fc81::9"
-    },
-    "dns0.eu_KIDS":{
-        "Primary": "193.110.81.1",
-        "Secondary": "185.253.5.1",
-        "Primary6": "2a0f:fc80::1",
-        "Secondary6": "2a0f:fc81::1"
     }
-}
+}

config/feature.json

@@ -9,8 +9,9 @@
       "NetFx4-AdvSrvs",
       "NetFx3"
     ],
-    "InvokeScript": [],
+    "InvokeScript": [
-    "link": "https://winutil.christitus.com/dev/features/features/dotnet"
+
+    ]
   },
   "WPFFeatureshyperv": {
     "Content": "HyperV Virtualization",
@@ -30,8 +31,7 @@
     ],
     "InvokeScript": [
       "Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /set hypervisorschedulertype classic' -Wait"
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/hyperv"
   },
   "WPFFeatureslegacymedia": {
     "Content": "Legacy Media (WMP, DirectPlay)",
@@ -45,8 +45,9 @@
       "DirectPlay",
       "LegacyComponents"
     ],
-    "InvokeScript": [],
+    "InvokeScript": [
-    "link": "https://winutil.christitus.com/dev/features/features/legacymedia"
+
+    ]
   },
   "WPFFeaturewsl": {
     "Content": "Windows Subsystem for Linux",
@@ -58,8 +59,9 @@
       "VirtualMachinePlatform",
       "Microsoft-Windows-Subsystem-Linux"
     ],
-    "InvokeScript": [],
+    "InvokeScript": [
-    "link": "https://winutil.christitus.com/dev/features/features/wsl"
+
+    ]
   },
   "WPFFeaturenfs": {
     "Content": "NFS - Network File System",
@@ -78,8 +80,7 @@
       "Set-ItemProperty -Path 'HKLM:\\SOFTWARE\\Microsoft\\ClientForNFS\\CurrentVersion\\Default' -Name 'AnonymousGID' -Type DWord -Value 0",
       "nfsadmin client start",
       "nfsadmin client localhost config fileaccess=755 SecFlavors=+sys -krb5 -krb5i"
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/nfs"
   },
   "WPFFeatureEnableSearchSuggestions": {
     "Content": "Enable Search Box Web Suggestions in Registry(explorer restart)",
@@ -87,7 +88,8 @@
     "category": "Features",
     "panel": "1",
     "Order": "a015_",
-    "feature": [],
+    "feature": [
+    ],
     "InvokeScript": [
       "
       If (!(Test-Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer')) {
@@ -96,8 +98,7 @@
       New-ItemProperty -Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer' -Name 'DisableSearchBoxSuggestions' -Type DWord -Value 0 -Force
       Stop-Process -name explorer -force
       "
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/enablesearchsuggestions"
   },
   "WPFFeatureDisableSearchSuggestions": {
     "Content": "Disable Search Box Web Suggestions in Registry(explorer restart)",
@@ -105,7 +106,8 @@
     "category": "Features",
     "panel": "1",
     "Order": "a016_",
-    "feature": [],
+    "feature": [
+    ],
     "InvokeScript": [
       "
       If (!(Test-Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer')) {
@@ -114,8 +116,7 @@
       New-ItemProperty -Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer' -Name 'DisableSearchBoxSuggestions' -Type DWord -Value 1 -Force
       Stop-Process -name explorer -force
       "
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/disablesearchsuggestions"
   },
   "WPFFeatureRegBackup": {
     "Content": "Enable Daily Registry Backup Task 12.30am",
@@ -123,7 +124,8 @@
     "category": "Features",
     "panel": "1",
     "Order": "a017_",
-    "feature": [],
+    "feature": [
+    ],
     "InvokeScript": [
       "
       New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager' -Name 'EnablePeriodicBackup' -Type DWord -Value 1 -Force
@@ -132,8 +134,7 @@
       $trigger = New-ScheduledTaskTrigger -Daily -At 00:30
       Register-ScheduledTask -Action $action -Trigger $trigger -TaskName 'AutoRegBackup' -Description 'Create System Registry Backups' -User 'System'
       "
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/regbackup"
   },
   "WPFFeatureEnableLegacyRecovery": {
     "Content": "Enable Legacy F8 Boot Recovery",
@@ -141,7 +142,8 @@
     "category": "Features",
     "panel": "1",
     "Order": "a018_",
-    "feature": [],
+    "feature": [
+    ],
     "InvokeScript": [
       "
       If (!(Test-Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood')) {
@@ -150,8 +152,7 @@
       New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood' -Name 'Enabled' -Type DWord -Value 1 -Force
       Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /Set {Current} BootMenuPolicy Legacy' -Wait
       "
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/enablelegacyrecovery"
   },
   "WPFFeatureDisableLegacyRecovery": {
     "Content": "Disable Legacy F8 Boot Recovery",
@@ -159,7 +160,8 @@
     "category": "Features",
     "panel": "1",
     "Order": "a019_",
-    "feature": [],
+    "feature": [
+    ],
     "InvokeScript": [
       "
       If (!(Test-Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood')) {
@@ -168,16 +170,14 @@
       New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood' -Name 'Enabled' -Type DWord -Value 0 -Force
       Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /Set {Current} BootMenuPolicy Standard' -Wait
       "
-    ],
+    ]
-    "link": "https://winutil.christitus.com/dev/features/features/disablelegacyrecovery"
   },
-  "WPFFeaturesSandbox": {
+  "WPFFeaturesandbox": {
     "Content": "Windows Sandbox",
     "category": "Features",
     "panel": "1",
     "Order": "a021_",
-    "Description": "Windows Sandbox is a lightweight virtual machine that provides a temporary desktop environment to safely run applications and programs in isolation.",
+    "Description": "Windows Sandbox is a lightweight virtual machine that provides a temporary desktop environment to safely run applications and programs in isolation."
-    "link": "https://winutil.christitus.com/dev/features/features/sandbox"
   },
   "WPFFeatureInstall": {
     "Content": "Install Features",
@@ -185,8 +185,7 @@
     "panel": "1",
     "Order": "a060_",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/features/install"
   },
   "WPFPanelAutologin": {
     "Content": "Set Up Autologin",
@@ -194,8 +193,7 @@
     "Order": "a040_",
     "panel": "1",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/fixes/autologin"
   },
   "WPFFixesUpdate": {
     "Content": "Reset Windows Update",
@@ -203,8 +201,7 @@
     "panel": "1",
     "Order": "a041_",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/fixes/update"
   },
   "WPFFixesNetwork": {
     "Content": "Reset Network",
@@ -212,8 +209,7 @@
     "Order": "a042_",
     "panel": "1",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/fixes/network"
   },
   "WPFPanelDISM": {
     "Content": "System Corruption Scan",
@@ -221,8 +217,7 @@
     "panel": "1",
     "Order": "a043_",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/fixes/dism"
   },
   "WPFFixesWinget": {
     "Content": "WinGet Reinstall",
@@ -230,8 +225,7 @@
     "panel": "1",
     "Order": "a044_",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/fixes/winget"
   },
   "WPFRunAdobeCCCleanerTool": {
     "Content": "Remove Adobe Creative Cloud",
@@ -239,102 +233,55 @@
     "panel": "1",
     "Order": "a045_",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/fixes/runadobecccleanertool"
   },
   "WPFPanelnetwork": {
     "Content": "Network Connections",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/network"
   },
   "WPFPanelcontrol": {
     "Content": "Control Panel",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/control"
   },
   "WPFPanelpower": {
     "Content": "Power Panel",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/power"
   },
   "WPFPanelregion": {
     "Content": "Region",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/region"
   },
   "WPFPanelsound": {
     "Content": "Sound Settings",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/sound"
-  },
-  "WPFPanelprinter": {
-    "Content": "Printer Panel",
-    "category": "Legacy Windows Panels",
-    "panel": "2",
-    "Type": "Button",
-    "ButtonWidth": "300",
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/printer"
   },
   "WPFPanelsystem": {
     "Content": "System Properties",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
+    "ButtonWidth": "300"
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/system"
   },
   "WPFPaneluser": {
     "Content": "User Accounts",
     "category": "Legacy Windows Panels",
     "panel": "2",
     "Type": "Button",
-    "ButtonWidth": "300",
-    "link": "https://winutil.christitus.com/dev/features/legacy-windows-panels/user"
-  },
-  "WPFPanelGodMode": {
-    "Content": "God Mode",
-    "category": "Legacy Windows Panels",
-    "panel": "2",
-    "Type": "Button",
-    "ButtonWidth": "300"
-  },
-  "WPFWinUtilInstallPSProfile": {
-    "Content": "Install CTT PowerShell Profile",
-    "category": "Powershell Profile",
-    "panel": "2",
-    "Order": "a083_",
-    "Type": "Button",
-    "ButtonWidth": "300"
-  },
-  "WPFWinUtilUninstallPSProfile": {
-    "Content": "Uninstall CTT PowerShell Profile",
-    "category": "Powershell Profile",
-    "panel": "2",
-    "Order": "a084_",
-    "Type": "Button",
-    "ButtonWidth": "300"
-  },
-  "WPFWinUtilSSHServer": {
-    "Content": "Enable OpenSSH Server",
-    "category": "Remote Access",
-    "panel": "2",
-    "Order": "a084_",
-    "Type": "Button",
     "ButtonWidth": "300"
   }
 }

config/preset.json

@@ -2,7 +2,6 @@
   "Standard": [
     "WPFTweaksAH",
     "WPFTweaksConsumerFeatures",
-    "WPFTweaksDisableExplorerAutoDiscovery",
     "WPFTweaksDVR",
     "WPFTweaksHiber",
     "WPFTweaksHome",
@@ -15,11 +14,11 @@
     "WPFTweaksDeleteTempFiles",
     "WPFTweaksEndTaskOnTaskbar",
     "WPFTweaksRestorePoint",
+    "WPFTweaksTeredo",
     "WPFTweaksPowershell7Tele"
   ],
   "Minimal": [
     "WPFTweaksConsumerFeatures",
-    "WPFTweaksDisableExplorerAutoDiscovery",
     "WPFTweaksHome",
     "WPFTweaksServices",
     "WPFTweaksTele"

config/themes.json

@@ -1,122 +1,208 @@
 {
-    "shared":{
+    "Classic":  {
-        "AppEntryWidth":  "130",
+                    "CustomDialogFontSize":       "12",
-        "AppEntryFontSize":  "11",
+                    "CustomDialogFontSizeHeader": "14",
-        "AppEntryMargin":  "1,1,1,1",
+                    "CustomDialogIconSize":       "25",
-        "AppEntryBorderTickness":  "0",
+                    "CustomDialogWidth":          "400",
-        "CustomDialogFontSize":       "12",
+                    "CustomDialogHeight":         "200",
-        "CustomDialogFontSizeHeader": "14",
-        "CustomDialogLogoSize":       "25",
-        "CustomDialogWidth":          "400",
-        "CustomDialogHeight":         "200",
-        "FontSize":         "12",
-        "FontFamily":       "Arial",
-        "HeaderFontSize":  "16",
-        "HeaderFontFamily": "Consolas, Monaco",
-        "CheckBoxBulletDecoratorSize": "14",
-        "CheckBoxMargin": "15,0,0,2",
-        "TabContentMargin":       "5",
-        "TabButtonFontSize":      "14",
-        "TabButtonWidth":         "110",
-        "TabButtonHeight":        "26",
-        "TabRowHeightInPixels":   "50",
-        "ToolTipWidth":         "300",
-        "IconFontSize":     "14",
-        "IconButtonSize":   "35",
-        "SettingsIconFontSize":   "18",
-        "CloseIconFontSize":      "18",
-        "MicroWinLogoSize": "10",
-        "MicrowinCheckBoxMargin": "-10,5,0,0",
-        "GroupBorderBackgroundColor":  "#232629",
-        "ButtonFontSize":   "12",
-        "ButtonFontFamily": "Arial",
-        "ButtonWidth":      "200",
-        "ButtonHeight":     "25",
-        "ConfigUpdateButtonFontSize":   "14",
-        "SearchBarWidth":               "200",
-        "SearchBarHeight":              "26",
-        "SearchBarTextBoxFontSize":     "12",
-        "SearchBarClearButtonFontSize": "14",
-        "CheckboxMouseOverColor": "#999999",
-        "ButtonBorderThickness":  "1",
-        "ButtonMargin":  "1",
-        "ButtonCornerRadius": "2"
-    },
-    "Light": {
-        "AppInstallUnselectedColor": "#F7F7F7",
-        "AppInstallHighlightedColor": "#CFCFCF",
-        "AppInstallSelectedColor": "#C2C2C2",
-        "ComboBoxForegroundColor":  "#232629",
-        "ComboBoxBackgroundColor":  "#F7F7F7",
-        "LabelboxForegroundColor":  "#232629",
-        "MainForegroundColor":  "#232629",
-        "MainBackgroundColor":  "#F7F7F7",
-        "LabelBackgroundColor":  "#F7F7F7",
-        "LinkForegroundColor":  "#484848",
-        "LinkHoverForegroundColor":  "#232629",
-        "ScrollBarBackgroundColor": "#4A4D52",
-        "ScrollBarHoverColor": "#5A5D62",
-        "ScrollBarDraggingColor": "#6A6D72",
 
-        "ProgressBarForegroundColor": "#2e77ff",
+                    "FontSize":         "12",
-        "ProgressBarBackgroundColor": "Transparent",
+                    "FontFamily":       "Arial",
-        "ProgressBarTextColor": "#232629",
+                    "FontSizeHeading":  "14",
-        "ButtonInstallBackgroundColor":  "#F7F7F7",
+                    "HeaderFontFamily": "Consolas, Monaco",
-        "ButtonTweaksBackgroundColor":  "#F7F7F7",
-        "ButtonConfigBackgroundColor":  "#F7F7F7",
-        "ButtonUpdatesBackgroundColor":  "#F7F7F7",
-        "ButtonInstallForegroundColor":  "#232629",
-        "ButtonTweaksForegroundColor":  "#232629",
-        "ButtonConfigForegroundColor":  "#232629",
-        "ButtonUpdatesForegroundColor":  "#232629",
-        "ButtonBackgroundColor":  "#F5F5F5",
-        "ButtonBackgroundPressedColor":  "#1A1A1A",
-        "ButtonBackgroundMouseoverColor":  "#C2C2C2",
-        "ButtonBackgroundSelectedColor":  "#F0F0F0",
-        "ButtonForegroundColor":  "#232629",
-        "ToggleButtonOnColor":  "#2e77ff",
-        "ToggleButtonOffColor": "#707070",
-        "ToolTipBackgroundColor": "#F7F7F7",
-        "BorderColor": "#232629",
-        "BorderOpacity": "0.2"
 
-    },
+                    "CheckBoxBulletDecoratorFontSize": "14",
-    "Dark": {
+                    "CheckBoxMargin": "15,0,0,2",
-        "AppInstallUnselectedColor": "#232629",
-        "AppInstallHighlightedColor": "#3C3C3C",
-        "AppInstallSelectedColor": "#4C4C4C",
-        "ComboBoxForegroundColor":  "#F7F7F7",
-        "ComboBoxBackgroundColor":  "#1E3747",
-        "LabelboxForegroundColor":  "#0567ff",
-        "MainForegroundColor":  "#F7F7F7",
-        "MainBackgroundColor":  "#232629",
-        "LabelBackgroundColor":  "#232629",
-        "LinkForegroundColor":  "#add8e6",
-        "LinkHoverForegroundColor":  "#F7F7F7",
-        "ScrollBarBackgroundColor": "#2E3135",
-        "ScrollBarHoverColor": "#3B4252",
-        "ScrollBarDraggingColor": "#5E81AC",
 
-        "ProgressBarForegroundColor": "#222222",
+                    "TabButtonFontSize":      "14",
-        "ProgressBarBackgroundColor": "Transparent",
+                    "TabButtonWidth":         "100",
-        "ProgressBarTextColor": "#cccccc",
+                    "TabButtonHeight":        "25",
-        "ButtonInstallBackgroundColor":  "#222222",
+                    "TabRowHeightInPixels":   "50",
-        "ButtonTweaksBackgroundColor":  "#333333",
+                    "IconFontSize":     "14",
-        "ButtonConfigBackgroundColor":  "#444444",
+                    "IconButtonSize":   "35",
-        "ButtonUpdatesBackgroundColor":  "#555555",
+                    "WinUtilIconSize":        "Auto",
-        "ButtonInstallForegroundColor":  "#F7F7F7",
+                    "SettingsIconFontSize":   "18",
-        "ButtonTweaksForegroundColor":  "#F7F7F7",
+
-        "ButtonConfigForegroundColor":  "#F7F7F7",
+                    "MicroWinLogoSize": "10",
-        "ButtonUpdatesForegroundColor":  "#F7F7F7",
+
-        "ButtonBackgroundColor":  "#1E3747",
+                    "ComboBoxBackgroundColor":  "#FFFFFF",
-        "ButtonBackgroundPressedColor":  "#F7F7F7",
+                    "LabelboxForegroundColor":  "#000000",
-        "ButtonBackgroundMouseoverColor":  "#3B4252",
+                    "MainForegroundColor":  "#000000",
-        "ButtonBackgroundSelectedColor":  "#5E81AC",
+                    "MainBackgroundColor":  "#FFFFFF",
-        "ButtonForegroundColor":  "#F7F7F7",
+                    "LabelBackgroundColor":  "#FAFAFA",
-        "ToggleButtonOnColor": "#2e77ff",
+                    "LinkForegroundColor":  "#000000",
-        "ToggleButtonOffColor": "#707070",
+                    "LinkHoverForegroundColor":  "#000000",
-        "ToolTipBackgroundColor": "#2F373D",
+                    "GroupBorderBackgroundColor":  "#000000",
-        "BorderColor": "#2F373D",
+                    "ComboBoxForegroundColor":  "#000000",
-        "BorderOpacity": "0.2"
+
-    }
+                    "ButtonFontSize":   "12",
+                    "ButtonFontFamily": "Arial",
+                    "ButtonWidth":      "200",
+                    "ButtonHeight":     "25",
+                    "ConfigTabButtonFontSize":      "16",
+
+                    "SearchBarWidth":               "200",
+                    "SearchBarHeight":              "25",
+                    "SearchBarTextBoxFontSize":     "16",
+                    "SearchBarClearButtonFontSize": "14",
+
+                    "ButtonInstallBackgroundColor":  "#FFFFFF",
+                    "ButtonTweaksBackgroundColor":  "#FFFFFF",
+                    "ButtonConfigBackgroundColor":  "#FFFFFF",
+                    "ButtonUpdatesBackgroundColor":  "#FFFFFF",
+                    "ButtonInstallForegroundColor":  "#000000",
+                    "ButtonTweaksForegroundColor":  "#000000",
+                    "ButtonConfigForegroundColor":  "#000000",
+                    "ButtonUpdatesForegroundColor":  "#000000",
+                    "ButtonBackgroundColor":  "#F5F5F5",
+                    "ButtonBackgroundPressedColor":  "#1A1A1A",
+                    "CheckboxMouseOverColor": "#999999",
+                    "ButtonBackgroundMouseoverColor":  "#C2C2C2",
+                    "ButtonBackgroundSelectedColor":  "#F0F0F0",
+                    "ButtonForegroundColor":  "#000000",
+                    "ToggleButtonOnColor":  "#2e77ff",
+
+                    "ButtonBorderThickness":  "1",
+                    "ButtonMargin":  "1",
+                    "ButtonCornerRadius": "2",
+                    "BorderColor": "#000000",
+                    "BorderOpacity": "0.2",
+                    "ShadowPulse": "Forever"
+                },
+    "Matrix":  {
+                    "CustomDialogFontSize":       "12",
+                    "CustomDialogFontSizeHeader": "14",
+                    "CustomDialogIconSize":       "25",
+                    "CustomDialogWidth":          "400",
+                    "CustomDialogHeight":         "200",
+
+                    "FontSize":         "12",
+                    "FontFamily":       "Arial",
+                    "FontSizeHeading":  "14",
+                    "HeaderFontFamily": "Consolas, Monaco",
+
+                    "CheckBoxBulletDecoratorFontSize": "14",
+                    "CheckBoxMargin": "15,0,0,2",
+
+                    "TabButtonFontSize":      "14",
+                    "TabButtonWidth":         "100",
+                    "TabButtonHeight":        "25",
+                    "TabRowHeightInPixels":   "50",
+                    "IconFontSize":     "14",
+                    "IconButtonSize":   "35",
+                    "WinUtilIconSize":        "Auto",
+                    "SettingsIconFontSize":   "18",
+
+                    "MicroWinLogoSize": "10",
+
+                    "ComboBoxBackgroundColor":  "#000000",
+                    "LabelboxForegroundColor":  "#FFEE58",
+                    "MainForegroundColor":  "#9CCC65",
+                    "MainBackgroundColor":  "#000000",
+                    "LabelBackgroundColor":  "#000000",
+                    "LinkForegroundColor":  "#add8e6",
+                    "LinkHoverForegroundColor":  "#FFFFFF",
+                    "ComboBoxForegroundColor":  "#FFEE58",
+
+                    "ButtonFontSize":   "12",
+                    "ButtonFontFamily": "Arial",
+                    "ButtonWidth":      "200",
+                    "ButtonHeight":     "25",
+                    "ConfigTabButtonFontSize":      "16",
+
+                    "SearchBarWidth":               "200",
+                    "SearchBarHeight":              "25",
+                    "SearchBarTextBoxFontSize":     "16",
+                    "SearchBarClearButtonFontSize": "14",
+
+                    "ButtonInstallBackgroundColor":  "#222222",
+                    "ButtonTweaksBackgroundColor":  "#333333",
+                    "ButtonConfigBackgroundColor":  "#444444",
+                    "ButtonUpdatesBackgroundColor":  "#555555",
+                    "ButtonInstallForegroundColor":  "#FFFFFF",
+                    "ButtonTweaksForegroundColor":  "#FFFFFF",
+                    "ButtonConfigForegroundColor":  "#FFFFFF",
+                    "ButtonUpdatesForegroundColor":  "#FFFFFF",
+                    "ButtonBackgroundColor":  "#000019",
+                    "ButtonBackgroundPressedColor":  "#FFFFFF",
+                    "ButtonBackgroundMouseoverColor":  "#A55A64",
+                    "ButtonBackgroundSelectedColor":  "#FF5733",
+                    "ButtonForegroundColor":  "#9CCC65",
+                    "ToggleButtonOnColor":  "#2e77ff",
+
+                    "ButtonBorderThickness":  "1",
+                    "ButtonMargin":  "1",
+                    "ButtonCornerRadius": "2",
+                    "BorderColor": "#FFAC1C",
+                    "BorderOpacity": "0.8",
+                    "ShadowPulse": "0:0:3"
+               },
+     "Dark":  {
+                    "CustomDialogFontSize":       "12",
+                    "CustomDialogFontSizeHeader": "14",
+                    "CustomDialogIconSize":       "25",
+                    "CustomDialogWidth":          "400",
+                    "CustomDialogHeight":         "200",
+
+                    "FontSize":         "12",
+                    "FontFamily":       "Arial",
+                    "FontSizeHeading":  "14",
+                    "HeaderFontFamily": "Consolas, Monaco",
+
+                    "CheckBoxBulletDecoratorFontSize": "14",
+                    "CheckBoxMargin": "15,0,0,2",
+
+                    "TabButtonFontSize":      "14",
+                    "TabButtonWidth":         "100",
+                    "TabButtonHeight":        "25",
+                    "TabRowHeightInPixels":   "50",
+                    "IconFontSize":     "14",
+                    "IconButtonSize":   "35",
+                    "WinUtilIconSize":        "Auto",
+                    "SettingsIconFontSize":   "18",
+
+                    "MicroWinLogoSize": "10",
+
+                    "ComboBoxBackgroundColor":  "#000000",
+                    "LabelboxForegroundColor":  "#FFEE58",
+                    "MainForegroundColor":  "#9CCC65",
+                    "MainBackgroundColor":  "#000000",
+                    "LabelBackgroundColor":  "#000000",
+                    "LinkForegroundColor":  "#add8e6",
+                    "LinkHoverForegroundColor":  "#FFFFFF",
+                    "ComboBoxForegroundColor":  "#FFEE58",
+
+                    "ButtonFontSize":   "12",
+                    "ButtonFontFamily": "Arial",
+                    "ButtonWidth":      "200",
+                    "ButtonHeight":     "25",
+                    "ConfigTabButtonFontSize":      "16",
+
+                    "SearchBarWidth":               "200",
+                    "SearchBarHeight":              "25",
+                    "SearchBarTextBoxFontSize":     "16",
+                    "SearchBarClearButtonFontSize": "14",
+
+                    "ButtonInstallBackgroundColor": "#222222",
+                    "ButtonTweaksBackgroundColor":  "#333333",
+                    "ButtonConfigBackgroundColor":  "#444444",
+                    "ButtonUpdatesBackgroundColor": "#555555",
+                    "ButtonInstallForegroundColor": "#FFFFFF",
+                    "ButtonTweaksForegroundColor":  "#FFFFFF",
+                    "ButtonConfigForegroundColor":  "#FFFFFF",
+                    "ButtonUpdatesForegroundColor": "#FFFFFF",
+                    "ButtonBackgroundColor":  "#000019",
+                    "ButtonBackgroundPressedColor":   "#9CCC65",
+                    "ButtonBackgroundMouseoverColor": "#FF5733",
+                    "ButtonBackgroundSelectedColor":  "#FF5733",
+                    "ButtonForegroundColor":  "#9CCC65",
+                    "ToggleButtonOnColor":    "#2e77ff",
+
+                    "ButtonBorderThickness":  "1",
+                    "ButtonMargin":  "1",
+                    "ButtonCornerRadius": "2",
+                    "BorderColor": "#FFAC1C",
+                    "BorderOpacity": "0.2",
+                    "ShadowPulse": "Forever"
+               }
 }

docs/CONTRIBUTING.md

@@ -1,117 +0,0 @@
-# How to Contribute?
-
-## Testing
-
-* Test the latest changes to WinUtil by running the pre-release and reporting issues you are encountering to help us continually improve WinUtil!
-
-#### **Run the latest pre-release**
-   ```ps1
-   irm https://christitus.com/windev | iex
-   ```
-
-!!! bug "Keep in mind"
-
-     This is a pre-release and should be treated as such. It exists for developers to test the utility and report or fix bugs before they get added to the stable release. Don't use it in production!
-
-## Issues
-
-* If you encounter any challenges or problems with the script, I kindly request that you submit them via the "Issues" tab on the GitHub repository. By filling out the provided template, you can provide specific details about the issue, allowing me (and others in the community) to promptly address any bugs or consider feature requests.
-
-## Contribute Code
-
-* Pull requests are now handled directly on the **MAIN branch**. This was done since we can now select specific releases to launch via releases in GitHub.
-
-* If you're doing code changes, then you can submit a PR to `main` branch, but I am very selective about these.
-
-!!! warning "Important"
-
-     Do not use a code formatter, make massive amounts of line changes, or make multiple feature changes. EACH FEATURE CHANGE SHOULD BE IT'S OWN PULL REQUEST!
-
-* When creating pull requests, it is essential to thoroughly document all changes made. This includes, but is not limited to, documenting any additions made to the `tweaks` section and corresponding `undo tweak`, so users are able to remove the newly added tweaks if necessary, and comprehensive documentation is required for all code changes. Document your changes and briefly explain why you made your changes in your Pull Request Description. Failure to adhere to this format may result in the denial of the pull request. Additionally, any code lacking sufficient documentation may also be denied.
-
-* By following these guidelines, we can maintain a high standard of quality and ensure that the codebase remains organized and well-documented.
-
-!!! note
-
-     When creating a function, please include "WPF" or "WinUtil" in the file name so it can be loaded into the runspace.
-
-## Walk through
-
-* This is a guide for beginners. If you are still having issues, look at the following official GitHub documentation:
-    * [Commit through WEB](https://docs.github.com/en/pull-requests/committing-changes-to-your-project/creating-and-editing-commits/about-commits)
-    * [Commit through GitHub Desktop](https://docs.github.com/en/desktop/making-changes-in-a-branch/committing-and-reviewing-changes-to-your-project-in-github-desktop#about-commits)
-    * [Create a Pull Request](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request)
-
-
-### Overview
-
-``` mermaid
-%%{init: {"flowchart": {"curve": "cardinal"}} }%%
-graph TD
-  A[Fork Project] --> B[Clone Repository];
-  B --> C[Create New Branch];
-  C --> D[Make Changes];
-  D --> G[Test Changes];
-  G --> H{Tests Passed?};
-  H -->|Yes| E[Commit Changes];
-  H -->|No| J[Fix Issues];
-  J --> G;
-  E --> F[Push Branch];
-  F --> K[Create Pull Request];
-  K --> L[Fill out PR template];
-  classDef default stroke:#333,stroke-width:4px,font-size:12pt;
-```
-!!! info
-
-     This is a diagram to guide you through the process. It may vary depending on the type of change you're making.
-
-### Fork the Repo
-* Fork the WinUtil Repository [here](https://github.com/ChrisTitusTech/winutil) to create a copy that will be available in your repository list.
-
-![Fork Image](assets/Fork-Button-Dark.png#only-dark#gh-dark-mode-only)
-
-![Fork Image](assets/Fork-Button-Light.png#only-light#gh-light-mode-only)
-
-### Clone the Fork
-!!! tip
-
-     While you can make your changes directly through the Web, we recommend cloning the repo to your device using the application GitHub Desktop (available in WinUtil) to test your fork easily.
-
-* Install GitHub Desktop if it is not already installed.
-* Log in using the same GitHub account you used to fork WinUtil.
-* Choose the fork under "Your Repositories" and press "clone {repo name}"
-* Create a new branch and name it something relatable to your changes.
-
-* Now you can modify WinUtil to your liking using your preferred text editor.
-
-
-### Testing your changes
-
-* To test to see if your changes work as intended run following commands in a powershell teminal as admin:
-
-* Change the directory where you are running the commands to the forked project.
-* `cd {path to the folder with the compile.ps1}`
-* Run the following command to compile and run WinUtil:
-* `.\Compile.ps1 -run`
-
-![Compile](assets/Compile.png)
-
-* After seeing that your changes work properly, feel free to commit the changes to the repository and make a PR. For help on that, follow the documentation below.
-
-### Committing the changes
-* Before committing your changes, please discard changes made to the `winutil.ps1` file, like the following:
-
-![Push Commit Image](assets/Discard-GHD.png)
-
-* Now, commit your changes once you are happy with the result.
-
-![Commit Image](assets/Commit-GHD.png)
-
-* Push the changes to upload them to your fork on github.com.
-
-![Push Commit Image](assets/Push-Commit.png)
-
-### Making a PR
-* To make a PR on your repo under a new branch linking to the main branch, a button will show and say Preview and Create pull request. Click that button and fill in all the information that is provided on the template. Once all the information is filled in correctly, check your PR to make sure there is not a WinUtil.ps1 file attached to the PR. Once everything is good, make the PR and wait for Chris (the maintainer) to accept or deny your PR. Once it is accepted by Chris, you will be able to see your changes in the "/windev" build.
-* If you do not see your feature in the main "/win" build, that is fine. All new changes go into the /windev build to make sure everything is working OK before going fully public.
-* Congratulations! You just submitted your first PR. Thank you so much for contributing to WinUtil.

docs/KnownIssues.md

@@ -1,214 +1,177 @@
-## Launch Issues
+## Known Issues and Fixes
 
-### Blocked by anti-virus
+### Launch Issues:
-Windows Security (formerly Defender) and other anti-virus software are known to block the script. The script gets flagged due to the fact that it requires administrator privileges & makes drastic system changes.
 
-To resolve this, allow/whitelist the script in your anti-virus software settings, or temporarily disable real-time protection. Since the project is open source, you may audit the code if security is a concern.
+- Windows Security (formerly Defender) and other anti-virus software are known to block the script. The script gets flagged due to the fact that it requires administrator privileges & makes drastic system changes.
+  - If possible: Allow script in Anti-Virus software settings.
 
-### Download not working
+- If you are having TLS 1.2 issues, or are having trouble resolving `christitus.com/win` then run with the following command:
-If `https://christitus.com/win` is not working, or you want to download the code from GitHub directly, you can use the direct download link:
 
 ```ps1
-irm https://github.com/ChrisTitusTech/winutil/releases/latest/download/winutil.ps1 | iex
+[Net.ServicePointManager]::SecurityProtocol=[Net.SecurityProtocolType]::Tls12;iex(New-Object Net.WebClient).DownloadString('https://github.com/ChrisTitusTech/winutil/releases/latest/download/winutil.ps1')
 ```
 
-If you are seeing errors referencing TLS or security, you may be running an older version of Windows where TLS 1.2 is not the default security protocol used for network connections. The following commands will force .NET to use TLS 1.2, and download the script directly using .NET instead of PowerShell:
+- If you are unable to resolve `christitus.com/win` and are getting  errors launching the tool, it might be due to India blocking GitHub's content domain and preventing downloads.
+  - Source: <https://timesofindia.indiatimes.com/gadgets-news/github-content-domain-blocked-for-these-indian-users-reports/articleshow/96687992.cms>
 
-```ps1
+If you are still having issues try using a **VPN**, or changing your **DNS provider** to:
-[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
-iex (New-Object Net.WebClient).DownloadString('https://github.com/ChrisTitusTech/winutil/releases/latest/download/winutil.ps1')
-```
 
-If it still isn't working and you live in India, it might be due to India blocking GitHub's content domain and preventing downloads. See more on [Times of India](https://timesofindia.indiatimes.com/gadgets-news/github-content-domain-blocked-for-these-indian-users-reports/articleshow/96687992.cms).
+| `1.1.1.1` | `1.0.0.1` | or  | `8.8.8.8` | `8.8.4.4` |
+|---------|---------|-----|---------|---------|
 
-If you are still having issues, try using a **VPN**, or changing your **DNS provider** to one of following two providers:
+- Script doesn't run/PowerShell crashes:
+  1. Press Windows Key+X and select 'PowerShell (Admin)' (Windows 10) or 'Windows Terminal (Admin)' (Windows 11)
+  2. Run:
+  ```ps1
+  Set-ExecutionPolicy Unrestricted -Scope Process -Force
+  ```
+  3. Run:
+  ```ps1
+  irm christitus.com/win | iex
+  ```
 
-|   Provider   | Primary DNS  | Secondary DNS |
+### Other Issues:
-|:------------:|:------------:|:-------------:|
-| Cloudflare   | `1.1.1.1`    | `1.0.0.1`     |
-| Google       | `8.8.8.8`    | `8.8.4.4`     |
-
-
-### Script blocked by Execution Policy
-1. Ensure you are running PowerShell as admin: Press `Windows Key`+`X` and select *PowerShell (Admin)* in Windows 10, or `Windows Terminal (Admin)` in Windows 11.
-2. In the PowerShell window, type this to allow unsigned code to execute and run the installation script:
-    ```ps1
-    Set-ExecutionPolicy Unrestricted -Scope Process -Force
-    irm https://christitus.com/win | iex
-    ```
-
-## Runtime Issues
-
-### WinGet configuration
-If you have not installed anything using PowerShell before, you may be prompted to configure WinGet. This requires user interaction on first run. You will need to manually type `y` into the PowerShell console and press enter to continue. Once you do it the first time, you will not be prompted again.
-
-### MicroWin: Error `0x80041031`
-This error code typically indicates an issue related to Windows Management Instrumentation (WMI). Here are a few steps you can try to resolve the issue:
-
-1. **Reboot Your Computer:**
-
-    Sometimes, a simple reboot can resolve temporary issues. Restart your computer and try mounting the ISO again.
-
-3. **Check for System Corruption:**
-
-    Run the System File Checker (SFC) utility to scan and repair system files that may be corrupted.
-    ```powershell
-    sfc /scannow
-    ```
-
-4. **Update Your System:**
-
-    Make sure your operating system is up-to-date. Check for Windows updates and install any pending updates.
-
-5. **Check WMI Service:**
-
-    Ensure that the Windows Management Instrumentation (WMI) service is running. You can do this through the Services application:
-    - Press `Win`+`R` to open the Run dialog.
-    - Type `services.msc` and press Enter.
-    - Locate *Windows Management Instrumentation* in the list.
-    - Make sure to set its status to "Running" and the startup type to "Automatic".
-
-6. **Check for Security Software Interference:**
-
-    Security software can sometimes interfere with WMI operations. Temporarily disable your anti-virus or security software and check if the issue persists. WMI is a common attack/infection vector, so many anti-virus programs will limit its usage.
-
-7. **Event Viewer:**
-
-    Check the Event Viewer for more detailed error information. Look for entries related to the `80041031` error and check if there are any additional details that can help identify the cause.
-
-    - Press `Win`+`X` and select *Event Viewer*.
-    - Navigate to *Windows Logs* > *Application* or *System*.
-    - Look for entries with the source related to WMI or the application use to mount the ISO.
-
-8. **ISO File Integrity:**
-
-    Ensure that the ISO file you are trying to mount is uncorrupted. Try mounting a different ISO file to see if the issue persists.
-
-If the problem persists after trying these steps, additional troubleshooting is required. Consider seeking assistance from Microsoft support or community forums for more specific guidance based on your system configuration and the software you use to mount the ISO.
-
-## Windows Issues
-
-### Windows takes longer to shut down
-This could be for a number of reasons:
-- Turn on fast startup: Press `Windows key`+`R`, then type:
-    ```bat
-    control /name Microsoft.PowerOptions /page pageGlobalSettings
-    ```
-- If that doesn't work, disable Hibernation:
-    - Press `Windows Key`+`X` and select *PowerShell (Admin)* in Windows 10, or `Windows Terminal (Admin)` in Windows 11.
-    - In the PowerShell window, type:
-        ```bat
-        powercfg /H off
-        ```
-Related issue: [#69](https://github.com/ChrisTitusTech/winutil/issues/69)
-
-### Windows Search does not work
-Enable Background Apps. Related issues: [#69](https://github.com/ChrisTitusTech/winutil/issues/69) [95](https://github.com/ChrisTitusTech/winutil/issues/95) [#232](https://github.com/ChrisTitusTech/winutil/issues/232)
-
-### Xbox Game Bar Activation Broken
-Set the Xbox Accessory Management Service to Automatic:
 
+- Windows taking longer to shut down:
+  - [#69](https://github.com/ChrisTitusTech/winutil/issues/69) Turn on fast startup: Press Windows key + R, then type:
+  ```
+  control /name Microsoft.PowerOptions /page pageGlobalSettings
+  ```
+  - If that doesn't work, Disable Hibernation: Press Windows Key+X and select 'PowerShell (Admin)' (Windows 10) or 'Windows Terminal (Admin)' (Windows 11) and enter:
+  ```ps1
+  powercfg /H off
+  ```
+- [#69](https://github.com/ChrisTitusTech/winutil/issues/69) [95](https://github.com/ChrisTitusTech/winutil/issues/95) [#232](https://github.com/ChrisTitusTech/winutil/issues/232) Windows Search does not work: Enable Background Apps
+- [#198](https://github.com/ChrisTitusTech/winutil/issues/198) Xbox Game Bar Activation Broken: Set the Xbox Accessory Management Service to Automatic
 ```ps1
 Get-Service -Name "XboxGipSvc" | Set-Service -StartupType Automatic
 ```
 
-Related issue: [#198](https://github.com/ChrisTitusTech/winutil/issues/198)
+- Winget requires interaction on first run: Manually type 'y' and 'enter' into the PowerShell console to continue
+- (Windows 11) Quick Settings no longer works: Launch the Script and click 'Enable Action Center'
 
-### Windows 11: Quick Settings no longer works
+- Explorer no longer launches: Go to Control Panel, File Explorer Options, Change the 'Open File Explorer to' option to 'This PC'.
-Launch the Script and click *Enable Action Center*.
 
-### Explorer (file browser) no longer launches
+### Battery drains too fast.
- - Press `Windows key`+`R` then type:
+When your battery on the laptop drains too fast, please perform these steps and report the results back to the Winutil community.
-    ```bat
-    control /name Microsoft.FolderOptions
-    ```
-- Change the *Open File Explorer to* option to *This PC*.
-
-### Battery drains too fast
-If you're using a laptop or tablet and find your battery drains too fast, please try the below troubleshooting steps, and report the results back to the Winutil community.
 
 1. **Check Battery Health:**
-    - Press `Windows Key`+`X` and select *PowerShell (Admin)* in Windows 10, or `Windows Terminal (Admin)` in Windows 11.
+   - Open a Command Prompt as an administrator.
-    - Run the following command to generate a battery report:
+   - Run the following command to generate a battery report:
-        ```powershell
+     ```powershell
-        powercfg /batteryreport /output "C:\battery_report.html"
+     powercfg /batteryreport /output "C:\battery_report.html"
-        ```
+     ```
-    - Open the generated HTML report to review information about battery health and usage. A battery with poor health may hold less charge, discharge faster, or cause other issues.
+   - Open the generated HTML report to review information about battery health and usage.
 
 2. **Review Power Settings:**
-    - Open the Settings app, and go to *System* > *Power & sleep*.
+   - Go to "Settings" > "System" > "Power & sleep."
-    - Adjust power plan settings based on your preferences and usage patterns.
+   - Adjust power plan settings based on your preferences and usage patterns.
-    - Click on *Additional power settings* to access advanced power settings that may help.
+   - Click on "Additional power settings" to access advanced power settings.
 
 3. **Identify Power-Hungry Apps:**
-    - Right-click on the taskbar and select *Task Manager*.
+   - Right-click on the taskbar and select "Task Manager."
-    - Navigate to the *Processes* tab to identify applications with high CPU or memory usage.
+   - Navigate to the "Processes" tab to identify applications with high CPU or memory usage.
-    - Consider reconfiguring, closing, disabling, or uninstalling applications that use a lot of resources.
+   - Consider closing unnecessary background applications.
 
 4. **Update Drivers:**
-    - Visit your device manufacturer's website or use Windows Update to check for driver updates.
+   - Visit your laptop manufacturer's website or use Windows Update to check for driver updates.
-    - Ensure graphics, chipset, and other essential drivers are up to date.
+   - Ensure graphics, chipset, and other essential drivers are up to date.
 
 5. **Check for Windows Updates:**
-    - Open the Settings app, and go to *Update & Security* > *Windows Update*.
+   - Go to "Settings" > "Update & Security" > "Windows Update."
-    - Check for and install any available updates for your operating system.
+   - Check for and install any available updates for your operating system.
 
 6. **Reduce Screen Brightness:**
-    - Open the Settings app, and go to *System* > *Display*.
+   - Adjust screen brightness based on your preferences and lighting conditions.
-    - Adjust screen brightness based on your preferences and lighting conditions.
+   - Go to "Settings" > "System" > "Display" to adjust brightness.
 
-7. **Enable Battery Saver:**
+7. **Battery Saver Mode:**
-    - Open the Settings app, and go to *System* > *Battery*.
+   - Go to "Settings" > "System" > "Battery."
-    - Turn on *Battery saver* to limit background activity and conserve power.
+   - Turn on "Battery saver" to limit background activity and conserve power.
 
 8. **Check Power Usage in Settings:**
-    - Open the Settings app, and go to *System* > *Battery* > *Battery usage by app*.
+   - Go to "Settings" > "System" > "Battery" > "Battery usage by app."
-    - Review the list of apps and their power usage. Disable or uninstall any you don't need.
+   - Review the list of apps and their power usage.
 
 9. **Check Background Apps:**
-    - Open the Settings app, and go to *Privacy* > *Background apps*.
+   - Go to "Settings" > "Privacy" > "Background apps."
-    - Disable or uninstall unnecessary apps running in the background.
+   - Disable unnecessary apps running in the background.
 
-10. **Use `powercfg` for Analysis:**
+10. **Use Powercfg for Analysis:**
-    - Press `Windows Key`+`X` and select *PowerShell (Admin)* in Windows 10, or `Windows Terminal (Admin)` in Windows 11.
+    - Open a Command Prompt as an administrator.
     - Run the following command to analyze energy usage and generate a report:
-        ```powershell
+      ```powershell
-        powercfg /energy /output "C:\energy_report.html"
+      powercfg /energy /output "C:\energy_report.html"
-        ```
+      ```
     - Open the generated HTML report to identify energy consumption patterns.
 
-11. **Review Event Logs:**
+11. **Review Event Viewer:**
     - Open Event Viewer by searching for it in the Start menu.
-    - Navigate to *Windows Logs* > *System*.
+    - Navigate to "Windows Logs" > "System."
-    - Look for events with the source *Power-Troubleshooter* to identify power-related events. These may highlight battery, input power, and other issues.
+    - Look for events with the source "Power-Troubleshooter" to identify power-related events.
 
 12. **Check Wake-up Sources:**
-    - Press `Windows Key`+`X` and select *PowerShell (Admin)* in Windows 10, or `Windows Terminal (Admin)` in Windows 11.
+    - Open a Command Prompt as an administrator.
     - Use the command `powercfg /requests` to identify processes preventing sleep.
+    - Check Task Scheduler for tasks waking up the computer.
     - Use the command `powercfg /waketimers` to view active wake timers.
-    - Check Task Scheduler to see if any of the discovered processes are scheduled to start on boot or at regular intervals.
 
-13. **Advanced Identification of Power-Hungry Apps:**
+13. **Resource Monitor:**
     - Open Resource Monitor from the Start menu.
-    - Navigate to the *CPU*, *Memory*, *Network*, and other tabs to identify processes with high resource usage.
+    - Navigate to the "CPU" tab and identify processes with high CPU usage.
-    - Consider reconfiguring, closing, disabling, or uninstalling applications that use a lot of resources.
 
-14. **Disable Activity History:**
+14. **Windows Settings - Activity History:**
-    - Open the Settings app, and go to *Privacy* > *Activity history*.
+    - In "Settings," go to "Privacy" > "Activity history."
-    - Turn off *Let Windows collect my activities from this PC*.
+    - Turn off "Let Windows collect my activities from this PC."
 
-15. **Prevent Network Adapters From Waking PC:**
+15. **Network Adapters:**
     - Open Device Manager by searching for it in the Start menu.
-    - Locate your network adapter, right-click, and go to *Properties*.
+    - Locate your network adapter, right-click, and go to "Properties."
-    - Under the *Power Management* tab, uncheck the option that allows the device to wake the computer.
+    - Under the "Power Management" tab, uncheck the option that allows the device to wake the computer.
 
 16. **Review Installed Applications:**
-    - Manually review installed applications by searching for *Add or remove programs* in the Start menu.
+    - Manually review installed applications by searching for "Add or remove programs" in the Start menu.
     - Check settings/preferences of individual applications for power-related options.
     - Uninstall unnecessary or problematic software.
 
-These troubleshooting steps are generic, but should help in most situations. You should have these key takeaways:
+By following these detailed instructions, you should be able to thoroughly diagnose and address battery drain issues on your Windows laptop. Adjust settings as needed to optimize power management and improve battery life.
-- Battery health is the most significant limiter on your device's runtime. A battery in poor health usually cannot be made to last like it used to, simply by closing some applications. Consider replacing your battery.
+
-- Background applications that use CPU and memory, make lots of or large network requests, read/write to disk frequently, or that keep your PC awake when it could be conserving energy are the next major concern. Avoid installing programs you don't need, only use programs you trust, and configure applications to use as little power and run as infrequently as possible.
+### Troubleshoot errors during Microwin usage
-- Windows performs a lot of tasks that may affect battery life by default. Changing settings, stopping scheduled tasks, and disabling features can help the system stay in lower power states to conserve battery.
+
-- Bad chargers, inconsistent power input, and high temperatures will cause batteries to degrade and discharge faster. Use trusted high-quality chargers, ensure input power is steady, clean any fans or airflow ports, and keep the battery/PC cool.
+#### Error `0x80041031`
+
+This error code typically indicates an issue related to Windows Management Instrumentation (WMI). Here are a few steps you can try to resolve the issue:
+
+1. **Reboot Your Computer:**
+   Sometimes, a simple reboot can resolve temporary issues. Restart your computer and try mounting the ISO again.
+
+2. **Check for System Corruption:**
+   Run the System File Checker (SFC) utility to scan and repair system files that may be corrupted.
+   ```powershell
+   sfc /scannow
+   ```
+
+3. **Update Your System:**
+   Make sure your operating system is up-to-date. Check for Windows updates and install any pending updates.
+
+4. **Check WMI Service:**
+   Ensure that the Windows Management Instrumentation (WMI) service is running. You can do this through the Services application:
+   - Press `Win + R` to open the Run dialog.
+   - Type `services.msc` and press Enter.
+   - Locate "Windows Management Instrumentation" in the list.
+   - Make sure to set its status to "Running" and the startup type to "Automatic."
+
+5. **Check for Security Software Interference:**
+   Security software can sometimes interfere with WMI operations. Temporarily disable your antivirus or security software and check if the issue persists.
+
+6. **Event Viewer:**
+   Check the Event Viewer for more detailed error information. Look for entries related to the `80041031` error and check if there are any additional details that can help identify the cause.
+
+   - Press `Win + X` and select "Event Viewer."
+   - Navigate to "Windows Logs" -> "Application" or "System."
+   - Look for entries with the source related to WMI or the application use to mount the ISO.
+
+7. **ISO File Integrity:**
+   Ensure that the ISO file you are trying to mount is uncorrupted. Try mounting a different ISO file to see if the issue persists.
+
+If the problem persists after trying these steps, additional troubleshooting is required. Consider seeking assistance from Microsoft support or community forums for more specific guidance based on your system configuration and the software you use to mount the ISO.

docs/contribute.md

@@ -0,0 +1,57 @@
+# How to Contribute?
+
+## Issues
+
+* If you encounter any challenges or problems with the script, I kindly request that you submit them via the "Issues" tab on the GitHub repository. By filling out the provided template, you can provide specific details about the issue, allowing me (and others in the community) to promptly address any bugs, or consider feature requests.
+
+## Contribute Code
+
+* Pull Requests are now handled directly on the **MAIN branch**. This was done since we can now select specific releases to launch via releases in GitHub.
+
+* If you're doing code changes, then you can submit a PR to `main` branch, but I am very selective about these.
+
+> [!WARNING]
+> Do not use a code formatter, massive amounts of line changes, and make multiple feature changes.
+> EACH FEATURE CHANGE SHOULD BE IT'S OWN Pull Request!
+
+* When creating pull requests, it is essential to thoroughly document all changes made. This includes, but not limited to, documenting any additions made to the `tweaks` section and corresponding `undo tweak`, so users are able to remove the newly added tweaks if necessary, and comprehensive documentation is required for all code changes, document your changes and briefly explain why you made your changes in your Pull Request Description. Failure to adhere to this format may result in denial of the pull request. Additionally, Any code lacking sufficient documentation may also be denied.
+
+* By following these guidelines, we can maintain a high standard of quality and ensure that the codebase remains organized and well-documented.
+
+> [!NOTE]
+> When creating a function, please include "WPF" or "WinUtil" in the file name so it can be loaded into the runspace.
+
+## Walk through
+
+### Fork the Repo
+* Fork the WinUtil Repository [here](https://github.com/ChrisTitusTech/winutil) to create a copy that will be available in your Repository-list.
+![Fork](assets/ForkButton.png)
+
+### Clone the Fork
+* While you can make your changes directly through the Web, we recommend cloning the repo to your device to test your fork easily.
+* Using the application GitHub Desktop (available in WinUtil) you can easily manage your repos locally. You can do it using other tools like git-cli (available in WinUtil), we recommend GitHub Desktop for ease of use.
+* Install GitHub Desktop if not already installed
+* Log in using the same GitHub account u used to fork WinUtil
+* Choose the fork under "Your Repositories" and press "clone {repo name}"
+* Create a new Branch and name it something relatable to your changes,
+
+* Now you can modify WinUtil to your liking using your prefered text editor.
+
+
+### Testing your changes
+* To test to see if your changes work as intended run following commands in a powershell teminal:
+
+* Change the directory where you are running the commands to the forked project.
+* `cd {path to the folder with the compile.ps1}`
+* Run following command to compile and run Winutil
+* `.\Compile.ps1 -run`
+* After seeing that your changes work properly feel free to commit the changes to the repository and make a PR, for help on that follow the documentation below.
+
+### Commiting the changes
+* Commit your changes once you are fine with the result
+* Push the changes to "upload" them to your fork on github.com.
+
+### Making a PR
+* To make a PR on your repo under a new branch linking to the main branch a button will show and say Preview and Create pull request. Click that button and fill in all information that is provided on the template. Once all the information is filled in correctly check your PR to make sure there is not a WinUtil.ps1 file attached to the PR. Once everything is good make the PR and wait for Chris (The Maintainer) to accept or deny your PR. Once it is accepted in by Chris you will be able to see your changes in the /windev build.
+* If you do not see your feature in the main /win build that is fine. As all new changes go into the /windev build to make sure everything is working ok before going fully public.
+* Congrats you just submitted your first PR. Thank you so much for contributing to WinUtil.

docs/dev/features/Features/DisableLegacyRecovery.md

@@ -1,61 +0,0 @@
-# Disable Legacy F8 Boot Recovery
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Disables Advanced Boot Options screen that lets you start Windows in advanced troubleshooting modes.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Disable Legacy F8 Boot Recovery",
-  "Description": "Disables Advanced Boot Options screen that lets you start Windows in advanced troubleshooting modes.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a019_",
-  "feature": [],
-  "InvokeScript": [
-    "
-      If (!(Test-Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood')) {
-            New-Item -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood' -Name 'Enabled' -Type DWord -Value 0 -Force
-      Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /Set {Current} BootMenuPolicy Standard' -Wait
-      "
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/DisableLegacyRecovery"
-}
-```
-
-</details>
-
-## Invoke Script
-
-```powershell
-
-      If (!(Test-Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\LastKnownGood')) {
-            New-Item -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\LastKnownGood' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\LastKnownGood' -Name 'Enabled' -Type DWord -Value 0 -Force
-      Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /Set {Current} BootMenuPolicy Standard' -Wait
-
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/DisableSearchSuggestions.md

@@ -1,61 +0,0 @@
-# Disable Search Box Web Suggestions in Registry(explorer restart)
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Disables web suggestions when searching using Windows Search.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Disable Search Box Web Suggestions in Registry(explorer restart)",
-  "Description": "Disables web suggestions when searching using Windows Search.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a016_",
-  "feature": [],
-  "InvokeScript": [
-    "
-      If (!(Test-Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer')) {
-            New-Item -Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer' -Name 'DisableSearchBoxSuggestions' -Type DWord -Value 1 -Force
-      Stop-Process -name explorer -force
-      "
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/DisableSearchSuggestions"
-}
-```
-
-</details>
-
-## Invoke Script
-
-```powershell
-
-      If (!(Test-Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows\Explorer')) {
-            New-Item -Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows\Explorer' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows\Explorer' -Name 'DisableSearchBoxSuggestions' -Type DWord -Value 1 -Force
-      Stop-Process -name explorer -force
-
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/EnableLegacyRecovery.md

@@ -1,61 +0,0 @@
-# Enable Legacy F8 Boot Recovery
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Enables Advanced Boot Options screen that lets you start Windows in advanced troubleshooting modes.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Enable Legacy F8 Boot Recovery",
-  "Description": "Enables Advanced Boot Options screen that lets you start Windows in advanced troubleshooting modes.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a018_",
-  "feature": [],
-  "InvokeScript": [
-    "
-      If (!(Test-Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood')) {
-            New-Item -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager\\LastKnownGood' -Name 'Enabled' -Type DWord -Value 1 -Force
-      Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /Set {Current} BootMenuPolicy Legacy' -Wait
-      "
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/EnableLegacyRecovery"
-}
-```
-
-</details>
-
-## Invoke Script
-
-```powershell
-
-      If (!(Test-Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\LastKnownGood')) {
-            New-Item -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\LastKnownGood' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager\LastKnownGood' -Name 'Enabled' -Type DWord -Value 1 -Force
-      Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /Set {Current} BootMenuPolicy Legacy' -Wait
-
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/EnableSearchSuggestions.md

@@ -1,61 +0,0 @@
-# Enable Search Box Web Suggestions in Registry(explorer restart)
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Enables web suggestions when searching using Windows Search.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Enable Search Box Web Suggestions in Registry(explorer restart)",
-  "Description": "Enables web suggestions when searching using Windows Search.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a015_",
-  "feature": [],
-  "InvokeScript": [
-    "
-      If (!(Test-Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer')) {
-            New-Item -Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKCU:\\SOFTWARE\\Policies\\Microsoft\\Windows\\Explorer' -Name 'DisableSearchBoxSuggestions' -Type DWord -Value 0 -Force
-      Stop-Process -name explorer -force
-      "
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/EnableSearchSuggestions"
-}
-```
-
-</details>
-
-## Invoke Script
-
-```powershell
-
-      If (!(Test-Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows\Explorer')) {
-            New-Item -Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows\Explorer' -Force | Out-Null
-      }
-      New-ItemProperty -Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows\Explorer' -Name 'DisableSearchBoxSuggestions' -Type DWord -Value 0 -Force
-      Stop-Process -name explorer -force
-
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/Install.md

@@ -1,80 +0,0 @@
-# Install Features
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Install Features",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a060_",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/Install"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFFeatureInstall
-
-```powershell
-function Invoke-WPFFeatureInstall {
-    <#
-
-    .SYNOPSIS
-        Installs selected Windows Features
-
-    #>
-
-    if($sync.ProcessRunning) {
-        $msg = "[Invoke-WPFFeatureInstall] Install process is currently running."
-        [System.Windows.MessageBox]::Show($msg, "Winutil", [System.Windows.MessageBoxButton]::OK, [System.Windows.MessageBoxImage]::Warning)
-        return
-    }
-
-    $Features = (Get-WinUtilCheckBoxes)["WPFFeature"]
-
-    Invoke-WPFRunspace -ArgumentList $Features -DebugPreference $DebugPreference -ScriptBlock {
-        param($Features, $DebugPreference)
-        $sync.ProcessRunning = $true
-        if ($Features.count -eq 1) {
-            $sync.form.Dispatcher.Invoke([action]{ Set-WinUtilTaskbaritem -state "Indeterminate" -value 0.01 -overlay "logo" })
-        } else {
-            $sync.form.Dispatcher.Invoke([action]{ Set-WinUtilTaskbaritem -state "Normal" -value 0.01 -overlay "logo" })
-        }
-
-        Invoke-WinUtilFeatureInstall $Features
-
-        $sync.ProcessRunning = $false
-        $sync.form.Dispatcher.Invoke([action]{ Set-WinUtilTaskbaritem -state "None" -overlay "checkmark" })
-
-        Write-Host "==================================="
-        Write-Host "---   Features are Installed    ---"
-        Write-Host "---  A Reboot may be required   ---"
-        Write-Host "==================================="
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/RegBackup.md

@@ -1,61 +0,0 @@
-# Enable Daily Registry Backup Task 12.30am
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Enables daily registry backup, previously disabled by Microsoft in Windows 10 1803.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Enable Daily Registry Backup Task 12.30am",
-  "Description": "Enables daily registry backup, previously disabled by Microsoft in Windows 10 1803.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a017_",
-  "feature": [],
-  "InvokeScript": [
-    "
-      New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager' -Name 'EnablePeriodicBackup' -Type DWord -Value 1 -Force
-      New-ItemProperty -Path 'HKLM:\\SYSTEM\\CurrentControlSet\\Control\\Session Manager\\Configuration Manager' -Name 'BackupCount' -Type DWord -Value 2 -Force
-      $action = New-ScheduledTaskAction -Execute 'schtasks' -Argument '/run /i /tn \"\\Microsoft\\Windows\\Registry\\RegIdleBackup\"'
-      $trigger = New-ScheduledTaskTrigger -Daily -At 00:30
-      Register-ScheduledTask -Action $action -Trigger $trigger -TaskName 'AutoRegBackup' -Description 'Create System Registry Backups' -User 'System'
-      "
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/RegBackup"
-}
-```
-
-</details>
-
-## Invoke Script
-
-```powershell
-
-      New-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager' -Name 'EnablePeriodicBackup' -Type DWord -Value 1 -Force
-      New-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager' -Name 'BackupCount' -Type DWord -Value 2 -Force
-      $action = New-ScheduledTaskAction -Execute 'schtasks' -Argument '/run /i /tn "\Microsoft\Windows\Registry\RegIdleBackup"'
-      $trigger = New-ScheduledTaskTrigger -Daily -At 00:30
-      Register-ScheduledTask -Action $action -Trigger $trigger -TaskName 'AutoRegBackup' -Description 'Create System Registry Backups' -User 'System'
-
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/Sandbox.md

@@ -1,39 +0,0 @@
-# Windows Sandbox
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Windows Sandbox is a lightweight virtual machine that provides a temporary desktop environment to safely run applications and programs in isolation.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Windows Sandbox",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a021_",
-  "Description": "Windows Sandbox is a lightweight virtual machine that provides a temporary desktop environment to safely run applications and programs in isolation.",
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/Sandbox"
-}
-```
-
-</details>
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/dotnet.md

@@ -1,56 +0,0 @@
-# All .Net Framework (2,3,4)
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-.NET and .NET Framework is a developer platform made up of tools, programming languages, and libraries for building many different types of applications.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "All .Net Framework (2,3,4)",
-  "Description": ".NET and .NET Framework is a developer platform made up of tools, programming languages, and libraries for building many different types of applications.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a010_",
-  "feature": [
-    "NetFx4-AdvSrvs",
-    "NetFx3"
-  ],
-  "InvokeScript": [],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/dotnet"
-}
-```
-
-</details>
-
-## Features
-
-
-Optional Windows Features are additional functionalities or components in the Windows operating system that users can choose to enable or disable based on their specific needs and preferences.
-
-
-You can find information about Optional Windows Features on [Microsoft's Website for Optional Features](https://learn.microsoft.com/en-us/windows/client-management/client-tools/add-remove-hide-features?pivots=windows-11).
-
-### Features to install
-- NetFx4-AdvSrvs
-- NetFx3
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/hyperv.md

@@ -1,76 +0,0 @@
-# HyperV Virtualization
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Hyper-V is a hardware virtualization product developed by Microsoft that allows users to create and manage virtual machines.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "HyperV Virtualization",
-  "Description": "Hyper-V is a hardware virtualization product developed by Microsoft that allows users to create and manage virtual machines.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a011_",
-  "feature": [
-    "HypervisorPlatform",
-    "Microsoft-Hyper-V-All",
-    "Microsoft-Hyper-V",
-    "Microsoft-Hyper-V-Tools-All",
-    "Microsoft-Hyper-V-Management-PowerShell",
-    "Microsoft-Hyper-V-Hypervisor",
-    "Microsoft-Hyper-V-Services",
-    "Microsoft-Hyper-V-Management-Clients"
-  ],
-  "InvokeScript": [
-    "Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /set hypervisorschedulertype classic' -Wait"
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/hyperv"
-}
-```
-
-</details>
-
-## Features
-
-
-Optional Windows Features are additional functionalities or components in the Windows operating system that users can choose to enable or disable based on their specific needs and preferences.
-
-
-You can find information about Optional Windows Features on [Microsoft's Website for Optional Features](https://learn.microsoft.com/en-us/windows/client-management/client-tools/add-remove-hide-features?pivots=windows-11).
-
-### Features to install
-- HypervisorPlatform
-- Microsoft-Hyper-V-All
-- Microsoft-Hyper-V
-- Microsoft-Hyper-V-Tools-All
-- Microsoft-Hyper-V-Management-PowerShell
-- Microsoft-Hyper-V-Hypervisor
-- Microsoft-Hyper-V-Services
-- Microsoft-Hyper-V-Management-Clients
-
-## Invoke Script
-
-```powershell
-Start-Process -FilePath cmd.exe -ArgumentList '/c bcdedit /set hypervisorschedulertype classic' -Wait
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/legacymedia.md

@@ -1,60 +0,0 @@
-# Legacy Media (WMP, DirectPlay)
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Enables legacy programs from previous versions of windows
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Legacy Media (WMP, DirectPlay)",
-  "Description": "Enables legacy programs from previous versions of windows",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a012_",
-  "feature": [
-    "WindowsMediaPlayer",
-    "MediaPlayback",
-    "DirectPlay",
-    "LegacyComponents"
-  ],
-  "InvokeScript": [],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/legacymedia"
-}
-```
-
-</details>
-
-## Features
-
-
-Optional Windows Features are additional functionalities or components in the Windows operating system that users can choose to enable or disable based on their specific needs and preferences.
-
-
-You can find information about Optional Windows Features on [Microsoft's Website for Optional Features](https://learn.microsoft.com/en-us/windows/client-management/client-tools/add-remove-hide-features?pivots=windows-11).
-
-### Features to install
-- WindowsMediaPlayer
-- MediaPlayback
-- DirectPlay
-- LegacyComponents
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/nfs.md

@@ -1,74 +0,0 @@
-# NFS - Network File System
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Network File System (NFS) is a mechanism for storing files on a network.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "NFS - Network File System",
-  "Description": "Network File System (NFS) is a mechanism for storing files on a network.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a014_",
-  "feature": [
-    "ServicesForNFS-ClientOnly",
-    "ClientForNFS-Infrastructure",
-    "NFS-Administration"
-  ],
-  "InvokeScript": [
-    "nfsadmin client stop",
-    "Set-ItemProperty -Path 'HKLM:\\SOFTWARE\\Microsoft\\ClientForNFS\\CurrentVersion\\Default' -Name 'AnonymousUID' -Type DWord -Value 0",
-    "Set-ItemProperty -Path 'HKLM:\\SOFTWARE\\Microsoft\\ClientForNFS\\CurrentVersion\\Default' -Name 'AnonymousGID' -Type DWord -Value 0",
-    "nfsadmin client start",
-    "nfsadmin client localhost config fileaccess=755 SecFlavors=+sys -krb5 -krb5i"
-  ],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/nfs"
-}
-```
-
-</details>
-
-## Features
-
-
-Optional Windows Features are additional functionalities or components in the Windows operating system that users can choose to enable or disable based on their specific needs and preferences.
-
-
-You can find information about Optional Windows Features on [Microsoft's Website for Optional Features](https://learn.microsoft.com/en-us/windows/client-management/client-tools/add-remove-hide-features?pivots=windows-11).
-
-### Features to install
-- ServicesForNFS-ClientOnly
-- ClientForNFS-Infrastructure
-- NFS-Administration
-
-## Invoke Script
-
-```powershell
-nfsadmin client stop
-Set-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\ClientForNFS\CurrentVersion\Default' -Name 'AnonymousUID' -Type DWord -Value 0
-Set-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\ClientForNFS\CurrentVersion\Default' -Name 'AnonymousGID' -Type DWord -Value 0
-nfsadmin client start
-nfsadmin client localhost config fileaccess=755 SecFlavors=+sys -krb5 -krb5i
-
-```
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Features/wsl.md

@@ -1,56 +0,0 @@
-# Windows Subsystem for Linux
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Windows Subsystem for Linux is an optional feature of Windows that allows Linux programs to run natively on Windows without the need for a separate virtual machine or dual booting.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Windows Subsystem for Linux",
-  "Description": "Windows Subsystem for Linux is an optional feature of Windows that allows Linux programs to run natively on Windows without the need for a separate virtual machine or dual booting.",
-  "category": "Features",
-  "panel": "1",
-  "Order": "a020_",
-  "feature": [
-    "VirtualMachinePlatform",
-    "Microsoft-Windows-Subsystem-Linux"
-  ],
-  "InvokeScript": [],
-  "link": "https://christitustech.github.io/winutil/dev/features/Features/wsl"
-}
-```
-
-</details>
-
-## Features
-
-
-Optional Windows Features are additional functionalities or components in the Windows operating system that users can choose to enable or disable based on their specific needs and preferences.
-
-
-You can find information about Optional Windows Features on [Microsoft's Website for Optional Features](https://learn.microsoft.com/en-us/windows/client-management/client-tools/add-remove-hide-features?pivots=windows-11).
-
-### Features to install
-- VirtualMachinePlatform
-- Microsoft-Windows-Subsystem-Linux
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Fixes/Autologin.md

@@ -1,56 +0,0 @@
-# Set Up Autologin
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Set Up Autologin",
-  "category": "Fixes",
-  "Order": "a040_",
-  "panel": "1",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Fixes/Autologin"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFPanelAutologin
-
-```powershell
-function Invoke-WPFPanelAutologin {
-    <#
-
-    .SYNOPSIS
-        Enables autologin using Sysinternals Autologon.exe
-
-    #>
-
-    # Official Microsoft recommendation: https://learn.microsoft.com/en-us/sysinternals/downloads/autologon
-    Invoke-WebRequest -Uri "https://live.sysinternals.com/Autologon.exe" -OutFile "$env:temp\autologin.exe"
-    cmd /c "$env:temp\autologin.exe" /accepteula
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Fixes/Network.md

@@ -1,73 +0,0 @@
-# Reset Network
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Reset Network",
-  "category": "Fixes",
-  "Order": "a042_",
-  "panel": "1",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Fixes/Network"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFFixesNetwork
-
-```powershell
-function Invoke-WPFFixesNetwork {
-    <#
-
-    .SYNOPSIS
-        Resets various network configurations
-
-    #>
-
-    Write-Host "Resetting Network with netsh"
-
-    # Reset WinSock catalog to a clean state
-    Start-Process -NoNewWindow -FilePath "netsh" -ArgumentList "winsock", "reset"
-    # Resets WinHTTP proxy setting to DIRECT
-    Start-Process -NoNewWindow -FilePath "netsh" -ArgumentList "winhttp", "reset", "proxy"
-    # Removes all user configured IP settings
-    Start-Process -NoNewWindow -FilePath "netsh" -ArgumentList "int", "ip", "reset"
-
-    Write-Host "Process complete. Please reboot your computer."
-
-    $ButtonType = [System.Windows.MessageBoxButton]::OK
-    $MessageboxTitle = "Network Reset "
-    $Messageboxbody = ("Stock settings loaded.`n Please reboot your computer")
-    $MessageIcon = [System.Windows.MessageBoxImage]::Information
-
-    [System.Windows.MessageBox]::Show($Messageboxbody, $MessageboxTitle, $ButtonType, $MessageIcon)
-    Write-Host "=========================================="
-    Write-Host "-- Network Configuration has been Reset --"
-    Write-Host "=========================================="
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Fixes/RunAdobeCCCleanerTool.md

@@ -1,76 +0,0 @@
-# Remove Adobe Creative Cloud
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Remove Adobe Creative Cloud",
-  "category": "Fixes",
-  "panel": "1",
-  "Order": "a045_",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Fixes/RunAdobeCCCleanerTool"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFRunAdobeCCCleanerTool
-
-```powershell
-function Invoke-WPFRunAdobeCCCleanerTool {
-    <#
-    .SYNOPSIS
-        It removes or fixes problem files and resolves permission issues in registry keys.
-    .DESCRIPTION
-        The Creative Cloud Cleaner tool is a utility for experienced users to clean up corrupted installations.
-    #>
-
-    [string]$url="https://swupmf.adobe.com/webfeed/CleanerTool/win/AdobeCreativeCloudCleanerTool.exe"
-
-    Write-Host "The Adobe Creative Cloud Cleaner tool is hosted at"
-    Write-Host "$url"
-
-    try {
-        # Don't show the progress because it will slow down the download speed
-        $ProgressPreference='SilentlyContinue'
-
-        Invoke-WebRequest -Uri $url -OutFile "$env:TEMP\AdobeCreativeCloudCleanerTool.exe" -UseBasicParsing -ErrorAction SilentlyContinue -Verbose
-
-        # Revert back the ProgressPreference variable to the default value since we got the file desired
-        $ProgressPreference='Continue'
-
-        Start-Process -FilePath "$env:TEMP\AdobeCreativeCloudCleanerTool.exe" -Wait -ErrorAction SilentlyContinue -Verbose
-    } catch {
-        Write-Error $_.Exception.Message
-    } finally {
-        if (Test-Path -Path "$env:TEMP\AdobeCreativeCloudCleanerTool.exe") {
-            Write-Host "Cleaning up..."
-            Remove-Item -Path "$env:TEMP\AdobeCreativeCloudCleanerTool.exe" -Verbose
-        }
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Fixes/Update.md

@@ -1,336 +0,0 @@
-# Reset Windows Update
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Reset Windows Update",
-  "category": "Fixes",
-  "panel": "1",
-  "Order": "a041_",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Fixes/Update"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFFixesUpdate
-
-```powershell
-function Invoke-WPFFixesUpdate {
-
-    <#
-
-    .SYNOPSIS
-        Performs various tasks in an attempt to repair Windows Update
-
-    .DESCRIPTION
-        1. (Aggressive Only) Scans the system for corruption using chkdsk, SFC, and DISM
-            Steps:
-                1. Runs chkdsk /scan /perf
-                    /scan - Runs an online scan on the volume
-                    /perf - Uses more system resources to complete a scan as fast as possible
-                2. Runs SFC /scannow
-                    /scannow - Scans integrity of all protected system files and repairs files with problems when possible
-                3. Runs DISM /Online /Cleanup-Image /RestoreHealth
-                    /Online - Targets the running operating system
-                    /Cleanup-Image - Performs cleanup and recovery operations on the image
-                    /RestoreHealth - Scans the image for component store corruption and attempts to repair the corruption using Windows Update
-                4. Runs SFC /scannow
-                    Ran twice in case DISM repaired SFC
-        2. Stops Windows Update Services
-        3. Remove the QMGR Data file, which stores BITS jobs
-        4. (Aggressive Only) Renames the DataStore and CatRoot2 folders
-            DataStore - Contains the Windows Update History and Log Files
-            CatRoot2 - Contains the Signatures for Windows Update Packages
-        5. Renames the Windows Update Download Folder
-        6. Deletes the Windows Update Log
-        7. (Aggressive Only) Resets the Security Descriptors on the Windows Update Services
-        8. Reregisters the BITS and Windows Update DLLs
-        9. Removes the WSUS client settings
-        10. Resets WinSock
-        11. Gets and deletes all BITS jobs
-        12. Sets the startup type of the Windows Update Services then starts them
-        13. Forces Windows Update to check for updates
-
-    .PARAMETER Aggressive
-        If specified, the script will take additional steps to repair Windows Update that are more dangerous, take a significant amount of time, or are generally unnecessary
-
-    #>
-
-    param($Aggressive = $false)
-
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -PercentComplete 0
-    # Wait for the first progress bar to show, otherwise the second one won't show
-    Start-Sleep -Milliseconds 200
-
-    if ($Aggressive) {
-        # Scan system for corruption
-        Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Scanning for corruption..." -PercentComplete 0
-        Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running chkdsk..." -PercentComplete 0
-        # 2>&1 redirects stdout, alowing iteration over the output
-        chkdsk.exe /scan /perf 2>&1 | ForEach-Object {
-            # Write stdout to the Verbose stream
-            Write-Verbose $_
-
-            # Get the index of the total percentage
-            $index = $_.IndexOf("Total:")
-            if (
-                # If the percent is found
-                ($percent = try {(
-                    $_.Substring(
-                        $index + 6,
-                        $_.IndexOf("%", $index) - $index - 6
-                    )
-                ).Trim()} catch {0}) `
-                <# And the current percentage is greater than the previous one #>`
-                -and $percent -gt $oldpercent
-            ) {
-                # Update the progress bar
-                $oldpercent = $percent
-                Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running chkdsk... ($percent%)" -PercentComplete $percent
-            }
-        }
-
-        Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running SFC..." -PercentComplete 0
-        $oldpercent = 0
-        # SFC has a bug when redirected which causes it to output only when the stdout buffer is full, causing the progress bar to move in chunks
-        sfc /scannow 2>&1 | ForEach-Object {
-            # Write stdout to the Verbose stream
-            Write-Verbose $_
-
-            # Filter for lines that contain a percentage that is greater than the previous one
-            if (
-                (
-                    # Use a different method to get the percentage that accounts for SFC's Unicode output
-                    [int]$percent = try {(
-                        (
-                            $_.Substring(
-                                $_.IndexOf("n") + 2,
-                                $_.IndexOf("%") - $_.IndexOf("n") - 2
-                            ).ToCharArray() | Where-Object {$_}
-                        ) -join ''
-                    ).TrimStart()} catch {0}
-                ) -and $percent -gt $oldpercent
-            ) {
-                # Update the progress bar
-                $oldpercent = $percent
-                Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running SFC... ($percent%)" -PercentComplete $percent
-            }
-        }
-
-        Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running DISM..." -PercentComplete 0
-        $oldpercent = 0
-        DISM /Online /Cleanup-Image /RestoreHealth | ForEach-Object {
-            # Write stdout to the Verbose stream
-            Write-Verbose $_
-
-            # Filter for lines that contain a percentage that is greater than the previous one
-            if (
-                ($percent = try {
-                    [int]($_ -replace "\[" -replace "=" -replace " " -replace "%" -replace "\]")
-                } catch {0}) `
-                -and $percent -gt $oldpercent
-            ) {
-                # Update the progress bar
-                $oldpercent = $percent
-                Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running DISM... ($percent%)" -PercentComplete $percent
-            }
-        }
-
-        Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running SFC again..." -PercentComplete 0
-        $oldpercent = 0
-        sfc /scannow 2>&1 | ForEach-Object {
-            # Write stdout to the Verbose stream
-            Write-Verbose $_
-
-            # Filter for lines that contain a percentage that is greater than the previous one
-            if (
-                (
-                    [int]$percent = try {(
-                        (
-                            $_.Substring(
-                                $_.IndexOf("n") + 2,
-                                $_.IndexOf("%") - $_.IndexOf("n") - 2
-                            ).ToCharArray() | Where-Object {$_}
-                        ) -join ''
-                    ).TrimStart()} catch {0}
-                ) -and $percent -gt $oldpercent
-            ) {
-                # Update the progress bar
-                $oldpercent = $percent
-                Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Running SFC... ($percent%)" -PercentComplete $percent
-            }
-        }
-        Write-Progress -Id 1 -ParentId 0 -Activity "Scanning for corruption" -Status "Completed" -PercentComplete 100
-    }
-
-
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Stopping Windows Update Services..." -PercentComplete 10
-    # Stop the Windows Update Services
-    Write-Progress -Id 2 -ParentId 0 -Activity "Stopping Services" -Status "Stopping BITS..." -PercentComplete 0
-    Stop-Service -Name BITS -Force
-    Write-Progress -Id 2 -ParentId 0 -Activity "Stopping Services" -Status "Stopping wuauserv..." -PercentComplete 20
-    Stop-Service -Name wuauserv -Force
-    Write-Progress -Id 2 -ParentId 0 -Activity "Stopping Services" -Status "Stopping appidsvc..." -PercentComplete 40
-    Stop-Service -Name appidsvc -Force
-    Write-Progress -Id 2 -ParentId 0 -Activity "Stopping Services" -Status "Stopping cryptsvc..." -PercentComplete 60
-    Stop-Service -Name cryptsvc -Force
-    Write-Progress -Id 2 -ParentId 0 -Activity "Stopping Services" -Status "Completed" -PercentComplete 100
-
-
-    # Remove the QMGR Data file
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Renaming/Removing Files..." -PercentComplete 20
-    Write-Progress -Id 3 -ParentId 0 -Activity "Renaming/Removing Files" -Status "Removing QMGR Data files..." -PercentComplete 0
-    Remove-Item "$env:allusersprofile\Application Data\Microsoft\Network\Downloader\qmgr*.dat" -ErrorAction SilentlyContinue
-
-
-    if ($Aggressive) {
-        # Rename the Windows Update Log and Signature Folders
-        Write-Progress -Id 3 -ParentId 0 -Activity "Renaming/Removing Files" -Status "Renaming the Windows Update Log, Download, and Signature Folder..." -PercentComplete 20
-        Rename-Item $env:systemroot\SoftwareDistribution\DataStore DataStore.bak -ErrorAction SilentlyContinue
-        Rename-Item $env:systemroot\System32\Catroot2 catroot2.bak -ErrorAction SilentlyContinue
-    }
-
-    # Rename the Windows Update Download Folder
-    Write-Progress -Id 3 -ParentId 0 -Activity "Renaming/Removing Files" -Status "Renaming the Windows Update Download Folder..." -PercentComplete 20
-    Rename-Item $env:systemroot\SoftwareDistribution\Download Download.bak -ErrorAction SilentlyContinue
-
-    # Delete the legacy Windows Update Log
-    Write-Progress -Id 3 -ParentId 0 -Activity "Renaming/Removing Files" -Status "Removing the old Windows Update log..." -PercentComplete 80
-    Remove-Item $env:systemroot\WindowsUpdate.log -ErrorAction SilentlyContinue
-    Write-Progress -Id 3 -ParentId 0 -Activity "Renaming/Removing Files" -Status "Completed" -PercentComplete 100
-
-
-    if ($Aggressive) {
-        # Reset the Security Descriptors on the Windows Update Services
-        Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Resetting the WU Service Security Descriptors..." -PercentComplete 25
-        Write-Progress -Id 4 -ParentId 0 -Activity "Resetting the WU Service Security Descriptors" -Status "Resetting the BITS Security Descriptor..." -PercentComplete 0
-        Start-Process -NoNewWindow -FilePath "sc.exe" -ArgumentList "sdset", "bits", "D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)"
-        Write-Progress -Id 4 -ParentId 0 -Activity "Resetting the WU Service Security Descriptors" -Status "Resetting the wuauserv Security Descriptor..." -PercentComplete 50
-        Start-Process -NoNewWindow -FilePath "sc.exe" -ArgumentList "sdset", "wuauserv", "D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)"
-        Write-Progress -Id 4 -ParentId 0 -Activity "Resetting the WU Service Security Descriptors" -Status "Completed" -PercentComplete 100
-    }
-
-
-    # Reregister the BITS and Windows Update DLLs
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Reregistering DLLs..." -PercentComplete 40
-    $oldLocation = Get-Location
-    Set-Location $env:systemroot\system32
-    $i = 0
-    $DLLs = @(
-        "atl.dll", "urlmon.dll", "mshtml.dll", "shdocvw.dll", "browseui.dll",
-        "jscript.dll", "vbscript.dll", "scrrun.dll", "msxml.dll", "msxml3.dll",
-        "msxml6.dll", "actxprxy.dll", "softpub.dll", "wintrust.dll", "dssenh.dll",
-        "rsaenh.dll", "gpkcsp.dll", "sccbase.dll", "slbcsp.dll", "cryptdlg.dll",
-        "oleaut32.dll", "ole32.dll", "shell32.dll", "initpki.dll", "wuapi.dll",
-        "wuaueng.dll", "wuaueng1.dll", "wucltui.dll", "wups.dll", "wups2.dll",
-        "wuweb.dll", "qmgr.dll", "qmgrprxy.dll", "wucltux.dll", "muweb.dll", "wuwebv.dll"
-    )
-    foreach ($dll in $DLLs) {
-        Write-Progress -Id 5 -ParentId 0 -Activity "Reregistering DLLs" -Status "Registering $dll..." -PercentComplete ($i / $DLLs.Count * 100)
-        $i++
-        Start-Process -NoNewWindow -FilePath "regsvr32.exe" -ArgumentList "/s", $dll
-    }
-    Set-Location $oldLocation
-    Write-Progress -Id 5 -ParentId 0 -Activity "Reregistering DLLs" -Status "Completed" -PercentComplete 100
-
-
-    # Remove the WSUS client settings
-    if (Test-Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate") {
-        Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Removing WSUS client settings..." -PercentComplete 60
-        Write-Progress -Id 6 -ParentId 0 -Activity "Removing WSUS client settings" -PercentComplete 0
-        Start-Process -NoNewWindow -FilePath "REG" -ArgumentList "DELETE", "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate", "/v", "AccountDomainSid", "/f" -RedirectStandardError $true
-        Start-Process -NoNewWindow -FilePath "REG" -ArgumentList "DELETE", "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate", "/v", "PingID", "/f" -RedirectStandardError $true
-        Start-Process -NoNewWindow -FilePath "REG" -ArgumentList "DELETE", "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate", "/v", "SusClientId", "/f" -RedirectStandardError $true
-        Write-Progress -Id 6 -ParentId 0 -Activity "Removing WSUS client settings" -Status "Completed" -PercentComplete 100
-    }
-
-
-    # Reset WinSock
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Resetting WinSock..." -PercentComplete 65
-    Write-Progress -Id 7 -ParentId 0 -Activity "Resetting WinSock" -Status "Resetting WinSock..." -PercentComplete 0
-    Start-Process -NoNewWindow -FilePath "netsh" -ArgumentList "winsock", "reset" -RedirectStandardOutput $true
-    Start-Process -NoNewWindow -FilePath "netsh" -ArgumentList "winhttp", "reset", "proxy" -RedirectStandardOutput $true
-    Start-Process -NoNewWindow -FilePath "netsh" -ArgumentList "int", "ip", "reset" -RedirectStandardOutput $true
-    Write-Progress -Id 7 -ParentId 0 -Activity "Resetting WinSock" -Status "Completed" -PercentComplete 100
-
-
-    # Get and delete all BITS jobs
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Deleting BITS jobs..." -PercentComplete 75
-    Write-Progress -Id 8 -ParentId 0 -Activity "Deleting BITS jobs" -Status "Deleting BITS jobs..." -PercentComplete 0
-    Get-BitsTransfer | Remove-BitsTransfer
-    Write-Progress -Id 8 -ParentId 0 -Activity "Deleting BITS jobs" -Status "Completed" -PercentComplete 100
-
-
-    # Change the startup type of the Windows Update Services and start them
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Starting Windows Update Services..." -PercentComplete 90
-    Write-Progress -Id 9 -ParentId 0 -Activity "Starting Windows Update Services" -Status "Starting BITS..." -PercentComplete 0
-    Get-Service BITS | Set-Service -StartupType Manual -PassThru | Start-Service
-    Write-Progress -Id 9 -ParentId 0 -Activity "Starting Windows Update Services" -Status "Starting wuauserv..." -PercentComplete 25
-    Get-Service wuauserv | Set-Service -StartupType Manual -PassThru | Start-Service
-    Write-Progress -Id 9 -ParentId 0 -Activity "Starting Windows Update Services" -Status "Starting AppIDSvc..." -PercentComplete 50
-    # The AppIDSvc service is protected, so the startup type has to be changed in the registry
-    Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\AppIDSvc" -Name "Start" -Value "3" # Manual
-    Start-Service AppIDSvc
-    Write-Progress -Id 9 -ParentId 0 -Activity "Starting Windows Update Services" -Status "Starting CryptSvc..." -PercentComplete 75
-    Get-Service CryptSvc | Set-Service -StartupType Manual -PassThru | Start-Service
-    Write-Progress -Id 9 -ParentId 0 -Activity "Starting Windows Update Services" -Status "Completed" -PercentComplete 100
-
-
-    # Force Windows Update to check for updates
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Forcing discovery..." -PercentComplete 95
-    Write-Progress -Id 10 -ParentId 0 -Activity "Forcing discovery" -Status "Forcing discovery..." -PercentComplete 0
-    (New-Object -ComObject Microsoft.Update.AutoUpdate).DetectNow()
-    Start-Process -NoNewWindow -FilePath "wuauclt" -ArgumentList "/resetauthorization", "/detectnow"
-    Write-Progress -Id 10 -ParentId 0 -Activity "Forcing discovery" -Status "Completed" -PercentComplete 100
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Status "Completed" -PercentComplete 100
-
-    $ButtonType = [System.Windows.MessageBoxButton]::OK
-    $MessageboxTitle = "Reset Windows Update "
-    $Messageboxbody = ("Stock settings loaded.`n Please reboot your computer")
-    $MessageIcon = [System.Windows.MessageBoxImage]::Information
-
-    [System.Windows.MessageBox]::Show($Messageboxbody, $MessageboxTitle, $ButtonType, $MessageIcon)
-    Write-Host "==============================================="
-    Write-Host "-- Reset All Windows Update Settings to Stock -"
-    Write-Host "==============================================="
-
-    # Remove the progress bars
-    Write-Progress -Id 0 -Activity "Repairing Windows Update" -Completed
-    Write-Progress -Id 1 -Activity "Scanning for corruption" -Completed
-    Write-Progress -Id 2 -Activity "Stopping Services" -Completed
-    Write-Progress -Id 3 -Activity "Renaming/Removing Files" -Completed
-    Write-Progress -Id 4 -Activity "Resetting the WU Service Security Descriptors" -Completed
-    Write-Progress -Id 5 -Activity "Reregistering DLLs" -Completed
-    Write-Progress -Id 6 -Activity "Removing WSUS client settings" -Completed
-    Write-Progress -Id 7 -Activity "Resetting WinSock" -Completed
-    Write-Progress -Id 8 -Activity "Deleting BITS jobs" -Completed
-    Write-Progress -Id 9 -Activity "Starting Windows Update Services" -Completed
-    Write-Progress -Id 10 -Activity "Forcing discovery" -Completed
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Fixes/Winget.md

@@ -1,58 +0,0 @@
-# WinGet Reinstall
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "WinGet Reinstall",
-  "category": "Fixes",
-  "panel": "1",
-  "Order": "a044_",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Fixes/Winget"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFFixesWinget
-
-```powershell
-function Invoke-WPFFixesWinget {
-
-    <#
-
-    .SYNOPSIS
-        Fixes Winget by running choco install winget
-    .DESCRIPTION
-        BravoNorris for the fantastic idea of a button to reinstall winget
-    #>
-    # Install Choco if not already present
-    Install-WinUtilChoco
-    Start-Process -FilePath "choco" -ArgumentList "install winget -y --force" -NoNewWindow -Wait
-
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/control.md

@@ -1,65 +0,0 @@
-# Control Panel
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Control Panel",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/control"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/network.md

@@ -1,65 +0,0 @@
-# Network Connections
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Network Connections",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/network"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/power.md

@@ -1,65 +0,0 @@
-# Power Panel
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Power Panel",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/power"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/printer.md

@@ -1,65 +0,0 @@
-# Printer Settings
-
-Last Updated: 2024-08-31
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Printer Settings",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelprinter" {Start-Process "shell:::{A8A91A66-3A7D-4424-8D24-04E180695C7A}"}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/../config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/region.md

@@ -1,65 +0,0 @@
-# Region
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Region",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/region"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/sound.md

@@ -1,65 +0,0 @@
-# Sound Settings
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Sound Settings",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/sound"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/system.md

@@ -1,65 +0,0 @@
-# System Properties
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "System Properties",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/system"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/features/Legacy-Windows-Panels/user.md

@@ -1,65 +0,0 @@
-# User Accounts
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "User Accounts",
-  "category": "Legacy Windows Panels",
-  "panel": "2",
-  "Type": "Button",
-  "ButtonWidth": "300",
-  "link": "https://christitustech.github.io/winutil/dev/features/Legacy-Windows-Panels/user"
-}
-```
-
-</details>
-
-## Function: Invoke-WPFControlPanel
-
-```powershell
-function Invoke-WPFControlPanel {
-    <#
-
-    .SYNOPSIS
-        Opens the requested legacy panel
-
-    .PARAMETER Panel
-        The panel to open
-
-    #>
-    param($Panel)
-
-    switch ($Panel) {
-        "WPFPanelcontrol" {cmd /c control}
-        "WPFPanelnetwork" {cmd /c ncpa.cpl}
-        "WPFPanelpower"   {cmd /c powercfg.cpl}
-        "WPFPanelregion"  {cmd /c intl.cpl}
-        "WPFPanelsound"   {cmd /c mmsys.cpl}
-        "WPFPanelsystem"  {cmd /c sysdm.cpl}
-        "WPFPaneluser"    {cmd /c "control userpasswords2"}
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/feature.json)
-

docs/dev/tweaks/Customize-Preferences/BingSearch.md

@@ -1,76 +0,0 @@
-# Bing Search in Start Menu
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-If enable then includes web search results from Bing in your Start Menu search.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Bing Search in Start Menu",
-  "Description": "If enable then includes web search results from Bing in your Start Menu search.",
-  "category": "Customize Preferences",
-  "panel": "2",
-  "Order": "a101_",
-  "Type": "Toggle",
-  "link": "https://christitustech.github.io/winutil/dev/tweaks/Customize-Preferences/BingSearch"
-}
-```
-
-</details>
-
-## Function: Invoke-WinUtilBingSearch
-
-```powershell
-function Invoke-WinUtilBingSearch {
-    <#
-
-    .SYNOPSIS
-        Disables/Enables Bing Search
-
-    .PARAMETER Enabled
-        Indicates whether to enable or disable Bing Search
-
-    #>
-    Param($Enabled)
-    try {
-        if ($Enabled -eq $false) {
-            Write-Host "Enabling Bing Search"
-            $value = 1
-        } else {
-            Write-Host "Disabling Bing Search"
-            $value = 0
-        }
-        $Path = "HKCU:\Software\Microsoft\Windows\CurrentVersion\Search"
-        Set-ItemProperty -Path $Path -Name BingSearchEnabled -Value $value
-    } catch [System.Security.SecurityException] {
-        Write-Warning "Unable to set $Path\$Name to $Value due to a Security Exception"
-    } catch [System.Management.Automation.ItemNotFoundException] {
-        Write-Warning $psitem.Exception.ErrorRecord
-    } catch {
-        Write-Warning "Unable to set $Name due to unhandled exception"
-        Write-Warning $psitem.Exception.StackTrace
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/tweaks.json)
-

docs/dev/tweaks/Customize-Preferences/DarkMode.md

@@ -1,78 +0,0 @@
-# Dark Theme for Windows
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Enable/Disable Dark Mode.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Dark Theme for Windows",
-  "Description": "Enable/Disable Dark Mode.",
-  "category": "Customize Preferences",
-  "panel": "2",
-  "Order": "a100_",
-  "Type": "Toggle",
-  "link": "https://christitustech.github.io/winutil/dev/tweaks/Customize-Preferences/DarkMode"
-}
-```
-
-</details>
-
-## Function: Invoke-WinUtilDarkMode
-
-```powershell
-Function Invoke-WinUtilDarkMode {
-    <#
-
-    .SYNOPSIS
-        Enables/Disables Dark Mode
-
-    .PARAMETER DarkMoveEnabled
-        Indicates the current dark mode state
-
-    #>
-    Param($DarkMoveEnabled)
-    try {
-        if ($DarkMoveEnabled -eq $false) {
-            Write-Host "Enabling Dark Mode"
-            $DarkMoveValue = 0
-        } else {
-            Write-Host "Disabling Dark Mode"
-            $DarkMoveValue = 1
-        }
-
-        $Path = "HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize"
-        Set-ItemProperty -Path $Path -Name AppsUseLightTheme -Value $DarkMoveValue
-        Set-ItemProperty -Path $Path -Name SystemUsesLightTheme -Value $DarkMoveValue
-    } catch [System.Security.SecurityException] {
-        Write-Warning "Unable to set $Path\$Name to $Value due to a Security Exception"
-    } catch [System.Management.Automation.ItemNotFoundException] {
-        Write-Warning $psitem.Exception.ErrorRecord
-    } catch {
-        Write-Warning "Unable to set $Name due to unhandled exception"
-        Write-Warning $psitem.Exception.StackTrace
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/tweaks.json)
-

docs/dev/tweaks/Customize-Preferences/DetailedBSoD.md

@@ -1,76 +0,0 @@
-# Detailed BSoD
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-If Enabled then you will see a detailed Blue Screen of Death (BSOD) with more information.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Detailed BSoD",
-  "Description": "If Enabled then you will see a detailed Blue Screen of Death (BSOD) with more information.",
-  "category": "Customize Preferences",
-  "panel": "2",
-  "Order": "a205_",
-  "Type": "Toggle",
-  "link": "https://christitustech.github.io/winutil/dev/tweaks/Customize-Preferences/DetailedBSoD"
-}
-```
-
-</details>
-
-## Function: Invoke-WinUtilDetailedBSoD
-
-```powershell
-Function Invoke-WinUtilDetailedBSoD {
-    <#
-
-    .SYNOPSIS
-        Enables/Disables Detailed BSoD
-        (Get-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\CrashControl' -Name 'DisplayParameters').DisplayParameters
-
-
-    #>
-    Param($Enabled)
-    try {
-        if ($Enabled -eq $false) {
-            Write-Host "Enabling Detailed BSoD"
-            $value = 1
-        } else {
-            Write-Host "Disabling Detailed BSoD"
-            $value =0
-        }
-
-        $Path = "HKLM:\SYSTEM\CurrentControlSet\Control\CrashControl"
-        Set-ItemProperty -Path $Path -Name DisplayParameters -Value $value
-    } catch [System.Security.SecurityException] {
-        Write-Warning "Unable to set $Path\$Name to $Value due to a Security Exception"
-    } catch [System.Management.Automation.ItemNotFoundException] {
-        Write-Warning $psitem.Exception.ErrorRecord
-    } catch {
-        Write-Warning "Unable to set $Name due to unhandled exception"
-        Write-Warning $psitem.Exception.StackTrace
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/tweaks.json)
-

docs/dev/tweaks/Customize-Preferences/HiddenFiles.md

@@ -1,76 +0,0 @@
-# Show Hidden Files
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-If Enabled then Hidden Files will be shown.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Show Hidden Files",
-  "Description": "If Enabled then Hidden Files will be shown.",
-  "category": "Customize Preferences",
-  "panel": "2",
-  "Order": "a200_",
-  "Type": "Toggle",
-  "link": "https://christitustech.github.io/winutil/dev/tweaks/Customize-Preferences/HiddenFiles"
-}
-```
-
-</details>
-
-## Function: Invoke-WinUtilHiddenFiles
-
-```powershell
-function Invoke-WinUtilHiddenFiles {
-    <#
-
-    .SYNOPSIS
-        Enable/Disable Hidden Files
-
-    .PARAMETER Enabled
-        Indicates whether to enable or disable Hidden Files
-
-    #>
-    Param($Enabled)
-    try {
-        if ($Enabled -eq $false) {
-            Write-Host "Enabling Hidden Files"
-            $value = 1
-        } else {
-            Write-Host "Disabling Hidden Files"
-            $value = 0
-        }
-        $Path = "HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced"
-        Set-ItemProperty -Path $Path -Name Hidden -Value $value
-    } catch [System.Security.SecurityException] {
-        Write-Warning "Unable to set $Path\$Name to $Value due to a Security Exception"
-    } catch [System.Management.Automation.ItemNotFoundException] {
-        Write-Warning $psitem.Exception.ErrorRecord
-    } catch {
-        Write-Warning "Unable to set $Name due to unhandled exception"
-        Write-Warning $psitem.Exception.StackTrace
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/tweaks.json)
-

docs/dev/tweaks/Customize-Preferences/MouseAcceleration.md

@@ -1,84 +0,0 @@
-# Mouse Acceleration
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-If Enabled then Cursor movement is affected by the speed of your physical mouse movements.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "Mouse Acceleration",
-  "Description": "If Enabled then Cursor movement is affected by the speed of your physical mouse movements.",
-  "category": "Customize Preferences",
-  "panel": "2",
-  "Order": "a107_",
-  "Type": "Toggle",
-  "link": "https://christitustech.github.io/winutil/dev/tweaks/Customize-Preferences/MouseAcceleration"
-}
-```
-
-</details>
-
-## Function: Invoke-WinUtilMouseAcceleration
-
-```powershell
-Function Invoke-WinUtilMouseAcceleration {
-    <#
-
-    .SYNOPSIS
-        Enables/Disables Mouse Acceleration
-
-    .PARAMETER DarkMoveEnabled
-        Indicates the current Mouse Acceleration State
-
-    #>
-    Param($MouseAccelerationEnabled)
-    try {
-        if ($MouseAccelerationEnabled -eq $false) {
-            Write-Host "Enabling Mouse Acceleration"
-            $MouseSpeed = 1
-            $MouseThreshold1 = 6
-            $MouseThreshold2 = 10
-        } else {
-            Write-Host "Disabling Mouse Acceleration"
-            $MouseSpeed = 0
-            $MouseThreshold1 = 0
-            $MouseThreshold2 = 0
-
-        }
-
-        $Path = "HKCU:\Control Panel\Mouse"
-        Set-ItemProperty -Path $Path -Name MouseSpeed -Value $MouseSpeed
-        Set-ItemProperty -Path $Path -Name MouseThreshold1 -Value $MouseThreshold1
-        Set-ItemProperty -Path $Path -Name MouseThreshold2 -Value $MouseThreshold2
-    } catch [System.Security.SecurityException] {
-        Write-Warning "Unable to set $Path\$Name to $Value due to a Security Exception"
-    } catch [System.Management.Automation.ItemNotFoundException] {
-        Write-Warning $psitem.Exception.ErrorRecord
-    } catch {
-        Write-Warning "Unable to set $Name due to unhandled exception"
-        Write-Warning $psitem.Exception.StackTrace
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/tweaks.json)
-

docs/dev/tweaks/Customize-Preferences/NumLock.md

@@ -1,77 +0,0 @@
-# NumLock on Startup
-
-Last Updated: 2024-08-07
-
-
-!!! info
-     The Development Documentation is auto generated for every compilation of WinUtil, meaning a part of it will always stay up-to-date. **Developers do have the ability to add custom content, which won't be updated automatically.**
-## Description
-
-Toggle the Num Lock key state when your computer starts.
-
-<!-- BEGIN CUSTOM CONTENT -->
-
-<!-- END CUSTOM CONTENT -->
-
-<details>
-<summary>Preview Code</summary>
-
-```json
-{
-  "Content": "NumLock on Startup",
-  "Description": "Toggle the Num Lock key state when your computer starts.",
-  "category": "Customize Preferences",
-  "panel": "2",
-  "Order": "a102_",
-  "Type": "Toggle",
-  "link": "https://christitustech.github.io/winutil/dev/tweaks/Customize-Preferences/NumLock"
-}
-```
-
-</details>
-
-## Function: Invoke-WinUtilNumLock
-
-```powershell
-function Invoke-WinUtilNumLock {
-    <#
-    .SYNOPSIS
-        Disables/Enables NumLock on startup
-    .PARAMETER Enabled
-        Indicates whether to enable or disable Numlock on startup
-    #>
-    Param($Enabled)
-    try {
-        if ($Enabled -eq $false) {
-            Write-Host "Enabling Numlock on startup"
-            $value = 2
-        } else {
-            Write-Host "Disabling Numlock on startup"
-            $value = 0
-        }
-        New-PSDrive -PSProvider Registry -Name HKU -Root HKEY_USERS
-        $HKUPath = "HKU:\.Default\Control Panel\Keyboard"
-        $HKCUPath = "HKCU:\Control Panel\Keyboard"
-        Set-ItemProperty -Path $HKUPath -Name InitialKeyboardIndicators -Value $value
-        Set-ItemProperty -Path $HKCUPath -Name InitialKeyboardIndicators -Value $value
-    }
-    Catch [System.Security.SecurityException] {
-        Write-Warning "Unable to set $Path\$Name to $Value due to a Security Exception"
-    } catch [System.Management.Automation.ItemNotFoundException] {
-        Write-Warning $psitem.Exception.ErrorRecord
-    } catch {
-        Write-Warning "Unable to set $Name due to unhandled exception"
-        Write-Warning $psitem.Exception.StackTrace
-    }
-}
-
-```
-
-
-<!-- BEGIN SECOND CUSTOM CONTENT -->
-
-<!-- END SECOND CUSTOM CONTENT -->
-
-
-[View the JSON file](https://github.com/ChrisTitusTech/winutil/tree/main/config/tweaks.json)
-