diff --git a/README.md b/README.md
index db23915..af1c3c1 100644
--- a/README.md
+++ b/README.md
@@ -18,7 +18,7 @@
 #### Manual Installation
 
 ```
-curl -fSL https://bitbucket.org/archlabslinux/installer/raw/master/archlabs-installer -o /usr/bin/archlabs-installer
+curl -fSL https://bitbucket.org/archlabslinux/installer/raw/master/installer -o /usr/bin/installer
 ```
 
 ---
diff --git a/archlabs-installer b/installer
similarity index 95%
rename from archlabs-installer
rename to installer
index d620977..cba9309 100755
--- a/archlabs-installer
+++ b/installer
@@ -259,7 +259,7 @@ declare -A FS_CMD_FLAGS=(
 [ntfs]='-q'
 [reiserfs]='-q'
 [vfat]='-F32'
-[xfs]='-f'
+[xfs]='-fq'
 ) # }
 
 # mount options for each filesystem {
@@ -315,7 +315,7 @@ _device="\nSelect a device to use from the list below.\n\nDevices (/dev) are the
 _mount="\nUse [Space] to toggle mount options from below, press [Enter] when done to confirm selection.\n\nNot selecting any and confirming will run an automatic mount."
 _warn="\nIMPORTANT: Choose carefully when editing, formatting, and mounting partitions or your DATA MAY BE LOST.\n\nTo mount a partition without formatting it, select 'skip' when prompted to choose a file system during the mounting stage.\nThis can only be used for partitions that already contain a file system and cannot be the root (/) partition, it needs to be formatted before install.\n"
 _part="\nFull device auto partitioning is available for beginners otherwise cfdisk is recommended.\n\n  - All systems will require a root partition (8G or greater).\n  - UEFI or BIOS using LUKS without LVM require a separate boot partition (100-512M)."
-_btrfs="\nBtrfs can create branching subvolumes.\n\nAn initial subvolume will be created and mounted with additional subvolumes branching from this created after.\nOtherwise you can skip directly to mounting options.\n\nCreate subvolumes?\n"
+_btrfs="\nBtrfs can be used with or without the use of subvolumes.\n\nAn initial subvolume will be created and mounted with additional subvolumes branching from this created after.\n\nUse subvolumes?\n"
 _uefi="\nSelect the EFI boot partition (/boot), required for UEFI boot.\n\nIt's usually the first partition on the device, 100-512M, and will be formatted as vfat/fat32 if not already."
 _bios="\nDo you want to use a separate boot partition? (optional)\n\nIt's usually the first partition on the device, 100-512M, and will be formatted as ext3/4 if not already."
 _biosluks="\nSelect the boot partition (/boot), required for LUKS.\n\nIt's usually the first partition on the device, 100-512M, and will be formatted as ext3/4 if not already."
@@ -357,7 +357,7 @@ _lvmdelask="\nConfirm deletion of volume group(s) and logical volume(s).\n\nDele
 # Errors
 _errexpart="\nCannot mount partition due to a problem with the mountpoint.\n\nEnsure it begins with a slash (/) followed by at least one character.\n"
 _errpart="\nYou need to create the partition(s) first.\n\n\nBIOS systems require at least one partition (ROOT).\n\nUEFI systems require at least two (ROOT and EFI).\n"
-_errchoice="\nIf you want to fix the issue yourself use Ctrl-z to pause the installer. From there you can do whatever is needed to resolve the error.\nOnce finished use the 'fg' command to resume the installer, then select 'Continue'.\n"
+_errchoice="\nIf you want to fix the issue yourself use Ctrl-z to pause the installer.\nFrom there you can do whatever is needed to resolve the error.\nOnce finished use the 'fg' command to resume the installer and select 'Continue'.\n"
 _lukserr="\nA minimum of two partitions are required for encryption:\n\n 1. root (/) - standard or LVM.\n 2. boot (/boot) - standard (unless using LVM on BIOS systems).\n"
 _lvmerr="\nThere are no viable partitions available to use for LVM, a minimum of one is required.\n\nIf LVM is already in use, deactivating it will allow the partition(s) to be used again.\n"
 _lvmerrvgname="\nInvalid name entered.\n\nThe volume group name may be alpha-numeric, but may not contain spaces, start with a '/', or already be in use.\n"
@@ -1036,30 +1036,24 @@ part_swap()
 part_mount()
 {
 	local part="$1"
-	local mntpt="${MNT}$2"
-	local ignore=0
-	[[ $part == "$ROOT" && $3 ]] && ignore=$3
+	local mntp="${MNT}$2"
 	local fs
 	fs="$(lsblk -lno FSTYPE "$part")"
 
-	mkdir -p "$mntpt"
+	mkdir -p "$mntp"
 
-	if [[ $ignore -ne 2 && $fs && ${FS_OPTS[$fs]} && $part != "$BOOT" && $part != "$AUTO_ROOT" ]] && select_mntopts "$fs"; then
-		mount -o $MNT_OPTS "$part" "$mntpt" > /dev/null 2> "$ERR" || mount -o $MNT_OPTS "$part" "$mntpt" > /dev/null 2> "$ERR"
-		errshow 0 "mount -o $MNT_OPTS $part $mntpt" || return 1
+	if [[ $BTRFS -ne 2 && $fs && ${FS_OPTS[$fs]} && $part != "$BOOT" && $part != "$AUTO_ROOT" ]] && select_mntopts "$part" "$fs"; then
+		mount -o $MNT_OPTS "$part" "$mntp" > /dev/null 2> "$ERR" || mount -o $MNT_OPTS "$part" "$mntp" > /dev/null 2> "$ERR"
+		errshow 0 "mount -o $MNT_OPTS $part $mntp" || return 1
 	else
-		mount "$part" "$mntpt" > /dev/null 2> "$ERR" || mount "$part" "$mntpt" > /dev/null 2> "$ERR"
-		errshow 0 "mount $part $mntpt" || return 1
+		mount "$part" "$mntp" > /dev/null 2> "$ERR" || mount "$part" "$mntp" > /dev/null 2> "$ERR"
+		errshow 0 "mount $part $mntp" || return 1
+		MNT_OPTS=''
 	fi
 
-	if grep -q "$mntpt" /proc/mounts; then
-		msg "Mount Success" "\n$part mounted at $mntpt\n" 1
-		part_countdec "$part"
-		part_cryptlv "$part"
-	else
-		msg "Mount Failed" "\nUnable to mount $part at $mntpt\n" 2
-		return 1
-	fi
+	msg "Mount Complete" "\nMounted $part at $mntp\n" 1
+	part_countdec "$part"
+	part_cryptlv "$part"
 
 	return 0
 }
@@ -1103,7 +1097,6 @@ part_format()
 	local part="$1"
 	local fs="$2"
 	local delay="$3"
-	shift 3
 
 	if [[ $fs == 'f2fs' && -z $PF2FS ]]; then
 		modprobe f2fs
@@ -1327,16 +1320,15 @@ select_boot()
 
 select_root()
 {
+	local pts dev size isize ptcount=0
+
 	if [[ -z $ROOT ]]; then
 		if [[ $AUTO_ROOT && -z $LVM && -z $LUKS ]]; then
 			ROOT="$AUTO_ROOT"
 			msg "Mount Menu" "\nUsing partitions created during automatic format.\n" 2
-			part_mount "$ROOT" || { ROOT=''; return 1; }
+			part_mount "$ROOT" || { AUTO_ROOT='' ROOT=''; return 1; }
 			return 0  # we're done here
-		else
-			local pts dev size isize ptcount=0
-
-			# walk partition list and skip ones that are < 8G
+		else # walk partition list and skip ones that are < 8G
 			while read -r dev size; do
 				s=${size%%__*}
 				size_t="${s: -1:1}"
@@ -1361,13 +1353,14 @@ select_root()
 
 	if [[ $ROOT ]]; then
 		select_filesystem "$ROOT" || return 1
-		part_mount "$ROOT" "" $BTRFS || return 1
+		part_mount "$ROOT" || return 1
 		if (( BTRFS == 2 )); then
 			btrfs_subvols "$ROOT" || return 1
 		fi
 		BTRFS=0
 		return 0
 	fi
+
 	# should never reach here unless an error occurred
 	ROOT=''
 	return 1
@@ -1441,7 +1434,7 @@ select_extra()
 			dlg part menu 'Mount Extra' "$_expart" 'done' 'finish mounting step' $PARTS || break
 			if [[ $part == 'done' ]]; then
 				break
-			elif select_filesystem "$part" && select_mountpoint && part_mount "$part" "$EXMNT" $BTRFS; then
+			elif select_filesystem "$part" && select_mountpoint && part_mount "$part" "$EXMNT"; then
 				if (( BTRFS == 2 )); then
 					btrfs_subvols "$part" "$EXMNT" || return 1
 				fi
@@ -1458,11 +1451,12 @@ select_extra()
 
 select_mntopts()
 {
-	local fs="$1"
+	local part="$1"
+	local fs="$2"
 	local opts=''
 	local title="${fs^} Mount Options"
 
-	yesno "$title" "\nMount partition with default options?\n" && return 1
+	yesno "$title" "\nMount $part with default mount options?\n" && return 1
 	for i in ${FS_OPTS[$fs]}; do
 		opts+="$i - off "
 	done
@@ -1470,7 +1464,7 @@ select_mntopts()
 		dlg MNT_OPTS check "$title" "$_mount" $opts
 		[[ $MNT_OPTS ]] || return 1 # no options is auto mount
 		MNT_OPTS="${MNT_OPTS// /,}"
-		yesno "$title" "\nConfirm the following options: $MNT_OPTS\n" || MNT_OPTS=''
+		yesno "$title" "\nConfirm mount options: $MNT_OPTS\n" || MNT_OPTS=''
 	done
 	return 0
 }
@@ -1550,9 +1544,12 @@ install_main()
 	install_login
 
 	# changing distro name?
-	if [[ $DIST != "ArchLabs" ]]; then
+	if grep -q 'ArchLabs' "$MNT/etc/lsb-release"; then
 		sed -i "s/ArchLabs/$DIST/g" "$MNT/etc/lsb-release"
 		sed -i "s/ArchLabs/$DIST/g" "$MNT/etc/os-release"
+	else
+		sed -i "s/Arch/$DIST/g" "$MNT/etc/lsb-release"
+		sed -i "s/Arch/$DIST/g" "$MNT/etc/os-release"
 	fi
 
 	# allow members of the wheel group to run commands as root
@@ -2385,15 +2382,14 @@ prerun_systemd-boot()
 btrfs_name()
 {
 	local txt="$1"
-	local def="$2"
-	local match="$3"
+	local match="$2"
 
 	SUBVOL=''
 	until [[ $SUBVOL ]]; do
-		dlg SUBVOL input "Subvolume Name" "$txt" "$def" || return 1
+		dlg SUBVOL input "Subvolume Name" "$txt" || return 1
 		if [[ -z $SUBVOL ]]; then
 			return 1
-		elif [[ $SUBVOL =~ \ |\' || $match == *"$SUBVOL"* || $SUBVOL == "$MVOL" ]]; then
+		elif [[ $SUBVOL =~ \ |\' || $match == *"$SUBVOL"* ]]; then
 			msg "Subvolume Name Error" "$_btrfserrname"
 			SUBVOL=''
 		fi
@@ -2401,48 +2397,47 @@ btrfs_name()
 	return 0
 }
 
+btrfs_extsubvols()
+{
+	local mntp="$1"
+	local mvol="$2"
+	local list=''
+	local n=0
+
+	SUBVOL_COUNT=0
+	dlg SUBVOL_COUNT menu "Subvolume Count" "\nSelect the number of subvolumes to create in: $mvol" \
+		0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 -
+	while (( ++n <= SUBVOL_COUNT )); do
+		local txt="\nEnter a name for subvolume $n within '$mvol'."
+		if (( n > 1 )); then
+			btrfs_name "$txt\n\nCreated subvolumes: $list" "$list $mvol" || return 1
+		else
+			btrfs_name "$txt" "$mvol" || return 1
+		fi
+		btrfs subvolume create "$mntp/$SUBVOL" > /dev/null 2> "$ERR"
+		errshow 0 "btrfs subvolume create $mntp/$SUBVOL" || return 1
+		list+="$SUBVOL "
+	done
+	return 0
+}
+
 btrfs_subvols()
 {
 	local part="$1"
-	local mntp="$2"
-	local list='' opts='' s="${mntp//\//_}" n=1
-	local txt="\nEnter a name for the initial subvolume.\n\nOnce mounted other subvolumes created for"
+	local mntp="${MNT}$2"
+	local mvol=''
 
-	btrfs_name "$txt $MNT${mntp} will branch from it." "subvol${s:-_root}" || return 1
-	MVOL="$SUBVOL"
-
-	mkdir -p "$MNT${mntp}" || return 1
-	[[ -z $mntp ]] && BTRFS_MNT="rootflags=subvol=$MVOL"
-
-	# create the main subvolume
-	btrfs subvolume create "$MNT${mntp}/$MVOL" > /dev/null 2> "$ERR"
-	errshow 0 "btrfs subvolume create $MNT${mntp}/$MVOL" || return 1
-	umount "$part" 2> "$ERR"
-	errshow 0 "umount $part" || return 1
-
-	if select_mntopts 'btrfs' && [[ $MNT_OPTS ]]; then
-		opts="${MNT_OPTS},subvol=${MVOL}"
-	else
-		opts="subvol=${MVOL}"
-	fi
-
-	mount -o $opts "$part" "$MNT${mntp}" 2> "$ERR"
-	errshow 0 "mount -o $opts $part $MNT${mntp}" || return 1
-	grep -q "$MNT${mntp}" /proc/mounts || { msg "Mount Failed" "\nUnable to mount $part at $MNT${mntp}\n" 2; return 1; }
-	msg "Mount Complete" "\nSubvolume $MVOL mounted at $MNT${mntp}\n" 1
-
-	# create the subvolume(s)
-	until [[ $SUBVOL == '*' ]]; do
-		local txt="\nEnter a name for subvolume $n within '$MVOL' subvolume."
-		txt+="\n\nThis process will be repeated until an asterisk (*) is entered as the subvolume name."
-		btrfs_name "$txt\n\nCreated subvolumes: ${list:-none}\n" "subvol_$n" "$list" || return 1
-		btrfs subvolume create "$MNT${mntp}/$MVOL/$SUBVOL" > /dev/null 2> "$ERR"
-		errshow 0 "btrfs subvolume create $MNT${mntp}/$MVOL/$SUBVOL" || return 1
-		(( n++ ))
-		list+="$SUBVOL "
-	done
-
-	msg "Btrfs Setup Complete" "\nBtrfs subvolumes:\n\n$(ls -R "$MNT${mntp}/$MVOL")"
+	btrfs_name "\nEnter a name for the initial subvolume on $part." || return 1
+	mvol="$SUBVOL"
+	[[ $mntp == "$MNT" ]] && BTRFS_MNT="rootflags=subvol=$mvol"
+	btrfs subvolume create "$mntp/$mvol" > /dev/null 2> "$ERR"
+	errshow 0 "btrfs subvolume create $mntp/$mvol" || return 1
+	umount_dir "$mntp" || return 1
+	select_mntopts 'btrfs' && [[ $MNT_OPTS ]] && MNT_OPTS+=','
+	mount -o ${MNT_OPTS}subvol=${mvol} "$part" "$mntp" 2> "$ERR"
+	errshow 0 "mount -o ${MNT_OPTS}subvol=${mvol} $part $mntp" || return 1
+	btrfs_extsubvols "$mntp" "$mvol" || return 1
+	msg "Btrfs Setup Complete" "\nCreated subvolumes:\n\n$(ls -R "$mntp/$mvol")"
 }
 
 ###############################################################################
@@ -2485,18 +2480,21 @@ lvm_detect()
 
 lvm_create()
 {
-	VGROUP='' LVM_PARTS='' VGROUP_MB=0
+	VGROUP='' LVM_PARTS='' VOL_COUNT=0 VGROUP_MB=0
 	umount_dir "$MNT"
 	lvm_mkgroup || return 1
+
 	local txt="\nThe last (or only) logical volume will automatically use all remaining space in the volume group."
-	dlg VOL_COUNT menu "$_lvmnew" "\nSelect the number of logical volumes (LVs) to create in: $VGROUP\n$txt" 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 -
+	dlg VOL_COUNT menu "$_lvmnew" "\nSelect the number of logical volumes (LVs) to create in: $VGROUP\n$txt" \
+		1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 -
 	[[ $VOL_COUNT ]] || return 1
 	lvm_extra_lvs || return 1
 	lvm_volume_name "$_lvmlvname\nNOTE: This LV will use up all remaining space in the volume group (${VGROUP_MB}MB)" || return 1
 	msg "$_lvmnew (LV:$VOL_COUNT)" "\nCreating volume $VNAME from remaining space in $VGROUP\n" 0
 	lvcreate -l +100%FREE "$VGROUP" -n "$VNAME" > /dev/null 2> "$ERR"
-	errshow 0 "lvcreate -l +100%FREE '$VGROUP' -n '$VNAME' >/dev/null" || return 1
-	LVM='logical volume'; sleep 0.5
+	errshow 0 "lvcreate -l +100%FREE $VGROUP -n $VNAME" || return 1
+	LVM='logical volume'
+	sleep 0.5
 	txt="\nDone, volume: $VGROUP-$VNAME (${VOLUME_SIZE:-${VGROUP_MB}MB}) has been created.\n"
 	msg "$_lvmnew (LV:$VOL_COUNT)" "$txt\n$(lsblk -o NAME,SIZE $LVM_PARTS)\n"
 	return 0
@@ -2508,7 +2506,7 @@ lvm_lv_size()
 
 	while :; do
 		ERR_SIZE=0
-		dlg VOLUME_SIZE input "$_lvmnew (LV:$VOL_COUNT)" "$txt" ''
+		dlg VOLUME_SIZE input "$_lvmnew (LV:$VOL_COUNT)" "$txt"
 		if [[ -z $VOLUME_SIZE ]]; then
 			ERR_SIZE=1
 			break # allow bailing with escape or an empty choice
@@ -2643,7 +2641,7 @@ lvm_group_name()
 {
 	VGROUP=''
 	until [[ $VGROUP ]]; do
-		dlg VGROUP input "$_lvmnew" "$_lvmvgname" "lvgroup"
+		dlg VGROUP input "$_lvmnew" "$_lvmvgname"
 		if [[ -z $VGROUP ]]; then
 			return 1
 		elif [[ ${VGROUP:0:1} == "/" || $VGROUP =~ \ |\' ]] || vgdisplay | grep -q "$VGROUP"; then
@@ -2657,10 +2655,9 @@ lvm_group_name()
 lvm_volume_name()
 {
 	VNAME=''
-	local txt="$1" default="root"
-	(( VOL_COUNT > 1 )) && default="volume$VOL_COUNT"
+	local txt="$1"
 	until [[ $VNAME ]]; do
-		dlg VNAME input "$_lvmnew (LV:$VOL_COUNT)" "\n$txt" "$default"
+		dlg VNAME input "$_lvmnew (LV:$VOL_COUNT)" "\n$txt"
 		if [[ -z $VNAME ]]; then
 			return 1
 		elif [[ ${VNAME:0:1} == "/" || $VNAME =~ \ |\' ]] || lsblk | grep -q "$VNAME"; then
@@ -2841,20 +2838,23 @@ dlg()
 	local l=$((LINES - 20))
 	(( ($# / 2) > l )) && n=$l
 
-	tput civis
 	case "$dlg_t" in
 		menu)
+			tput civis
 			dialog --backtitle "$DIST Installer - $SYS - v$VER" --title " $title " \
 				--menu "$body" 0 0 $n "$@" 2> "$ANS" || return 1
 			;;
 		check)
+			tput civis
 			dialog --backtitle "$DIST Installer - $SYS - v$VER" --title " $title " \
 				--checklist "$body" 0 0 $n "$@" 2> "$ANS" || return 1
 			;;
 		input)
 			tput cnorm
-			local def="$1" # assign default value for input
-			shift
+			if [[ $1 && $1 != 'limit' ]]; then
+				local def="$1" # assign default value for input
+				shift
+			fi
 			if [[ $1 == 'limit' ]]; then
 				dialog --backtitle "$DIST Installer - $SYS - v$VER" --max-input 63 \
 					--title " $title " --inputbox "$body" 0 0 "$def" 2> "$ANS" || return 1
@@ -2949,30 +2949,30 @@ usage()
 	usage: $1 [-hDn] [-r ROOT] [-b BOOT] [-l SESSION] [-d DISTRO] [-m MOUNTPOINT]
 
 	options:
-		-h		print this message and exit
-		-l		install and setup a live session
-		-D		enable xtrace and log output to $DBG
-		-m		set the mountpoint used for the new installation
-		-d		set the distribution name for the installed system
-		-n		no partitioning, mounting, or formatting (self mount)
-		-r		root partition to use for install, required when using -n
-		-b		boot partition to use for install, required on UEFI systems when using -n
-		-t		install and setup drivers for nvidia or tearfree xorg configs for other vendors
-				if you experience boot issues with this option you can remove /etc/X11/xorg.conf.d/20-*.conf
+	    -h		print this message and exit
+	    -l		install and setup a live session
+	    -D		enable xtrace and log output to $DBG
+	    -m		set the mountpoint used for the new installation
+	    -d		set the distribution name for the installed system
+	    -n		no partitioning, mounting, or formatting (self mount)
+	    -r		root partition to use for install, required when using -n
+	    -b		boot partition to use for install, required on UEFI systems when using -n
+	    -t		install and setup drivers for nvidia or tearfree xorg configs for other vendors
+                if you experience boot issues with this option, remove /etc/X11/xorg.conf.d/20-*.conf
 
 	sessions:
-		i3-gaps  - A fork of i3wm with more features including gaps
-		openbox  - A lightweight, powerful, and highly configurable stacking wm
-		dwm      - A dynamic WM for X that manages windows in tiled, floating, or monocle layouts
-		awesome  - A customized Awesome WM session created by @elanapan
-		lxqt     - A port of the lightweight desktop environment (LXDE) to Qt
-		bspwm    - A tiling wm that represents windows as the leaves of a binary tree
-		fluxbox  - A lightweight and highly-configurable window manager
-		jwm      - A lightweight window manager for Xorg written in C
-		gnome    - A desktop environment that aims to be simple and easy to use
-		cinnamon - A desktop environment combining traditional desktop with modern effects
-		plasma   - A kde software project currently comprising a full desktop environment
-		xfce4    - A lightweight and modular desktop environment based on gtk+2/3
+	    i3-gaps  - A fork of i3wm with more features including gaps
+	    openbox  - A lightweight, powerful, and highly configurable stacking wm
+	    dwm      - A dynamic WM for X that manages windows in tiled, floating, or monocle layouts
+	    awesome  - A customized Awesome WM session created by @elanapan
+	    lxqt     - A port of the lightweight desktop environment (LXDE) to Qt
+	    bspwm    - A tiling wm that represents windows as the leaves of a binary tree
+	    fluxbox  - A lightweight and highly-configurable window manager
+	    jwm      - A lightweight window manager for Xorg written in C
+	    gnome    - A desktop environment that aims to be simple and easy to use
+	    cinnamon - A desktop environment combining traditional desktop with modern effects
+	    plasma   - A kde software project currently comprising a full desktop environment
+	    xfce4    - A lightweight and modular desktop environment based on gtk+2/3
 
 	EOF
 	exit 0
@@ -3071,7 +3071,7 @@ errshow()
 	shift 1 # always shift off the fatal level arg
 
 	local txt
-	txt="\nCommand: $1\n\n\n\nError:\n$(errmsg)\n\n"
+	txt="\nCommand: $1\n\n$(errmsg)\n\n"
 	tput cnorm
 	if (( fatal )); then
 		dialog --backtitle "$DIST Installer - $SYS - v$VER" --title " Install Error " --yes-label "Abort" --no-label "Continue" \
@@ -3314,9 +3314,9 @@ fi
 # check for update once
 if [[ ! -f /tmp/new ]]; then
 	msg "Installer Update" "\nChecking for newer installer versions.\n" 1
-	if curl -fsSL https://bitbucket.org/archlabslinux/installer/raw/master/archlabs-installer -o /tmp/new; then
-		if (( $(vercmp "$(awk -F= '/^VER=/ {print $2}' /tmp/archlabs-installer)" "$VER") > 0 )); then
-			cp /tmp/new /usr/bin/archlabs-installer && exec archlabs-installer "$@"
+	if curl -fsSL https://bitbucket.org/archlabslinux/installer/raw/master/installer -o /tmp/new; then
+		if (( $(vercmp "$(awk -F= '/^VER=/ {print $2}' /tmp/new)" "$VER") > 0 )); then
+			cp /tmp/new /usr/bin/installer && exec installer "$@"
 			die
 		fi
 	else