v4.1 WIDTH/HEIGHT && move resolution README note

CHANGELOG.md

@@ -1,7 +1,7 @@
 |Version|Date|Notes|
 |---|---|---|
-|   |2021-03-04|Add `-e MASTER_PLIST_URL` to all images to allow using your own remote plist.|
+|4.1|2021-03-04|Add `-e MASTER_PLIST_URL` to all images to allow using your own remote plist.|
-|   |2021-03-03|Add WIDTH and HEIGHT to set the x and y resolutions, use in conjuction with serial numbers.|
+|   |2021-03-03|Add `WIDTH` and `HEIGHT` to set the x and y resolutions, use in conjuction with serial numbers.|
 |   |2021-03-02|Add ADDITIONAL_PORTS, for example `-e ADDITIONAL_PORTS='hostfwd=tcp::23-:23,'`|
 |4.0|2021-02-27|Add big-sur support. Use `sickcodes/docker-osx:big-sur` or build using `--build-arg VERSION=11`|
 |   |2021-02-26|Change `-e NOPICKER=true` to simply do `sed -i '/^.*InstallMedia.*/d' Launch.sh` and `export BOOTDISK=/home/arch/OSX-KVM/OpenCore-Catalina/OpenCore-nopicker.qcow2`.|

Dockerfile

@@ -5,11 +5,12 @@
 #  / /_/ / /_/ / /__/ ,< /  __/ /  / /_/ /___/ /   |
 # /_____/\____/\___/_/|_|\___/_/   \____//____/_/|_|
 #
-# Repo:             https://github.com/sickcodes/Docker-OSX/
+# Title:            Docker-OSX (Mac on Docker)
-# Title:            Mac on Docker (Docker-OSX)
+# Author:           Sick.Codes https://twitter.com/sickcodes
-# Author:           Sick.Codes https://sick.codes/
+# Version:          4.1
-# Version:          4.0
 # License:          GPLv3+
+# Repository:       https://github.com/sickcodes/Docker-OSX
+# Website:          https://sick.codes
 #
 # All credits for OSX-KVM and the rest at @Kholia's repo: https://github.com/kholia/osx-kvm
 # OpenCore support go to https://github.com/Leoyzen/KVM-Opencore

Dockerfile.auto

@@ -3,13 +3,14 @@
 #    / __ \____  _____/ /_____  _____/ __ \/ ___/ |/ /
 #   / / / / __ \/ ___/ //_/ _ \/ ___/ / / /\__ \|   / 
 #  / /_/ / /_/ / /__/ ,< /  __/ /  / /_/ /___/ /   |  
-# /_____/\____/\___/_/|_|\___/_/   \____//____/_/|_|  AUTOINSTALL
+# /_____/\____/\___/_/|_|\___/_/   \____//____/_/|_|  :AUTO
 # 
-# Title:            Mac on Docker (Docker-OSX) [AUTOINSTALL]
+# Title:            Docker-OSX (Mac on Docker)
-# Author:           Sick.Codes https://twitter.com/sickcodes       
+# Author:           Sick.Codes https://twitter.com/sickcodes
-# Version:          4.0
+# Version:          4.1
 # License:          GPLv3+
 # Repository:       https://github.com/sickcodes/Docker-OSX
+# Website:          https://sick.codes
 # 
 # This Dockerfile is a pre-installed naked installation of Docker-OSX!
 # 

Dockerfile.naked

@@ -3,13 +3,14 @@
 #    / __ \____  _____/ /_____  _____/ __ \/ ___/ |/ /
 #   / / / / __ \/ ___/ //_/ _ \/ ___/ / / /\__ \|   / 
 #  / /_/ / /_/ / /__/ ,< /  __/ /  / /_/ /___/ /   |  
-# /_____/\____/\___/_/|_|\___/_/   \____//____/_/|_|  NAKED/SUPPLY_YOUR_OWN
+# /_____/\____/\___/_/|_|\___/_/   \____//____/_/|_|  :NAKED
 # 
-# Title:            Mac on Docker (Docker-OSX) [AUTOINSTALL]
+# Title:            Docker-OSX (Mac on Docker) [AUTOINSTALL]
-# Author:           Sick.Codes https://twitter.com/sickcodes       
+# Author:           Sick.Codes https://twitter.com/sickcodes
-# Version:          4.0
+# Version:          4.1
 # License:          GPLv3+
 # Repository:       https://github.com/sickcodes/Docker-OSX
+# Website:          https://sick.codes
 # 
 # This image won't run unless you supply a disk image using:
 #       -v ${PWD}/mac_hdd_ng.img:/image

README.md

@@ -784,7 +784,7 @@ docker run -it \
     sickcodes/docker-osx:auto
 ```
 
-# This example generates a specific set of serial numbers at runtime, with your existing image, at 1000x1000 display resolution.
+### This example generates a specific set of serial numbers at runtime, with your existing image, at 1000x1000 display resolution.
 
 ```bash
 # run an existing image in current directory, with a screen, with SSH, with nopicker, and save the bootdisk for later.
@@ -824,36 +824,6 @@ Or you can generate them inside the `./custom` folder. And then use:
     -e MAC_ADDRESS="" \
 ```
 
-# Change Resolution Docker-OSX
-
-The display resolution is controlled by this line:
-
-https://github.com/sickcodes/Docker-OSX/blob/master/custom/config-nopicker-custom.plist#L819
-
-However, you need to mount that disk. Boring!
-
-Instead, you can simply add the following to any image:
-
-```bash
--e GENERATE_UNIQUE=true \
--e WIDTH=1920 \
--e HEIGHT=1080 \
-```
-
-It will take around 1 minute longer to boot because it will make a new boot partition.
-
-```bash
--e GENERATE_SPECIFIC=true \
--e WIDTH=1920 \
--e HEIGHT=1080 \
--e SERIAL="" \
--e BOARD_SERIAL="" \
--e UUID="" \
--e MAC_ADDRESS="" \
-```
-
-Must be used with either `-e GENERATE_UNIQUE=true` or `-e GENERATE_SPECIFIC=true`.
-
 #### Persistence from generating serial numbers is obviously ideal:
 
 ```bash
@@ -950,6 +920,97 @@ generate-specific-bootdisk.sh \
     --output-bootdisk OpenCore-nopicker.qcow2
 ```
 
+# Change Resolution Docker-OSX - change resolution OpenCore OSX-KVM 
+
+The display resolution is controlled by this line:
+
+https://github.com/sickcodes/Docker-OSX/blob/master/custom/config-nopicker-custom.plist#L819
+
+Instead of mounting that disk, Docker-OSX will generate a new `OpenCore.qcow2` by using this one cool trick:
+
+```bash
+-e GENERATE_UNIQUE=true \
+-e WIDTH=800 \
+-e HEIGHT=600 \
+```
+
+To use `WIDTH`/`HEIGHT`, you must use with either `-e GENERATE_UNIQUE=true` or `-e GENERATE_SPECIFIC=true`.
+
+It will take around 30 seconds longer to boot because it needs to make a new boot partition using `libguestfs`.
+
+```bash
+-e GENERATE_SPECIFIC=true \
+-e WIDTH=1920 \
+-e HEIGHT=1080 \
+-e SERIAL="" \
+-e BOARD_SERIAL="" \
+-e UUID="" \
+-e MAC_ADDRESS="" \
+```
+
+## Change Docker-OSX Resolution Examples
+
+```bash
+# using an image in your current directory
+stat mac_hdd_ng.img
+
+docker run -it \
+    --device /dev/kvm \
+    -p 50922:10022 \
+    -v "${PWD}/mac_hdd_ng.img:/image" \
+    -v /tmp/.X11-unix:/tmp/.X11-unix \
+    -e "DISPLAY=${DISPLAY:-:0.0}" \
+    -e GENERATE_SPECIFIC=true \
+    -e DEVICE_MODEL="iMacPro1,1" \
+    -e SERIAL="C02TW0WAHX87" \
+    -e BOARD_SERIAL="C027251024NJG36UE" \
+    -e UUID="5CCB366D-9118-4C61-A00A-E5BAF3BED451" \
+    -e MAC_ADDRESS="A8:5C:2C:9A:46:2F" \
+    -e MASTER_PLIST_URL=https://raw.githubusercontent.com/sickcodes/Docker-OSX/master/custom/config-nopicker-custom.plist \
+    -e WIDTH=1600 \
+    -e HEIGHT=900 \
+    sickcodes/docker-osx:naked
+```
+
+```bash
+# generating random serial numbers, using the DIY installer, along with the screen resolution changes.
+docker run -it \
+    --device /dev/kvm \
+    -p 50922:10022 \
+    -v /tmp/.X11-unix:/tmp/.X11-unix \
+    -e "DISPLAY=${DISPLAY:-:0.0}" \
+    -e GENERATE_UNIQUE=true \
+    -e WIDTH=800 \
+    -e HEIGHT=600 \
+    sickcodes/docker-osx:latest
+
+
+```
+
+
+Here's a few other resolutions! If you resolution is invalid, it will default to 800x600.
+
+```
+    -e WIDTH=800 \
+    -e HEIGHT=600 \
+```
+```
+    -e WIDTH=1280 \
+    -e HEIGHT=768 \
+```
+```
+    -e WIDTH=1600 \
+    -e HEIGHT=900 \
+```
+```
+    -e WIDTH=1920 \
+    -e HEIGHT=1080 \
+```
+```
+    -e WIDTH=2560 \
+    -e HEIGHT=1600 \
+```
+
 # Allow USB passthrough
 
 The simplest way to do this is the following: